# Capillary type LT level is elevated, how to solve it?

**URL:** <https://forumautomation.com/t/capillary-type-lt-level-is-elevated-how-to-solve-it/8762>\
**Category:** Field Instrumentation\
**Created:** [October 30, 2020, 3:47pm UTC](https://forumautomation.com/t/capillary-type-lt-level-is-elevated-how-to-solve-it/8762 "2020-10-30T15:47:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [October 30, 2020, 3:47pm UTC](https://forumautomation.com/t/capillary-type-lt-level-is-elevated-how-to-solve-it/8762/1 "2020-10-30T15:47:34Z")

</div>

**Capillary type LT level is slightly incresed while applying vacuum in reactor. Also LT is suitable for vacuum applications. So why is this problem?**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [October 30, 2020, 3:48pm UTC](https://forumautomation.com/t/capillary-type-lt-level-is-elevated-how-to-solve-it/8762/2 "2020-10-30T15:48:45Z")

</div>

You are pulling vacuum on the high side of the transmitter and the low side is not seeing that same pressure drop, low side of the transmitter could possibly be plugged off from the process.
