# Can we use vectorless VFD for vertical applications

**URL:** <https://forumautomation.com/t/can-we-use-vectorless-vfd-for-vertical-applications/9238>\
**Category:** Field Instrumentation\
**Created:** [March 10, 2021, 10:02am UTC](https://forumautomation.com/t/can-we-use-vectorless-vfd-for-vertical-applications/9238 "2021-03-10T10:02:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [March 10, 2021, 10:02am UTC](https://forumautomation.com/t/can-we-use-vectorless-vfd-for-vertical-applications/9238/1 "2021-03-10T10:02:47Z")

</div>

is it possible to use a vectorless VFD for vertical applications like lift, crane, etc

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [March 10, 2021, 10:06am UTC](https://forumautomation.com/t/can-we-use-vectorless-vfd-for-vertical-applications/9238/2 "2021-03-10T10:06:43Z")

</div>

if you are speaking about VFD vector control encoder less you cannot guarantee the position without an encoder, Encoderless is a good solution for pumps, fans control. All applications where you are not interested in the exact position control, so where the speed control is enough. For Vertical load, you need a break, which must be an integral part of VFD. Vector less or vector full is a matter of performance… With encoder, VFD calculate exactly rotary movement, slip, IR, and much other help to calculate based on actual rather logical calculation without encoder
