# Can we use pressure gauge to measure the open tank water level

**URL:** <https://forumautomation.com/t/can-we-use-pressure-gauge-to-measure-the-open-tank-water-level/10053>\
**Category:** Field Instrumentation\
**Created:** [December 13, 2021, 7:07am UTC](https://forumautomation.com/t/can-we-use-pressure-gauge-to-measure-the-open-tank-water-level/10053 "2021-12-13T07:07:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [December 13, 2021, 7:07am UTC](https://forumautomation.com/t/can-we-use-pressure-gauge-to-measure-the-open-tank-water-level/10053/1 "2021-12-13T07:07:03Z")

</div>

Is it possible to measure the open tank water level using a pressure gauge

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [December 13, 2021, 7:09am UTC](https://forumautomation.com/t/can-we-use-pressure-gauge-to-measure-the-open-tank-water-level/10053/2 "2021-12-13T07:09:07Z")

</div>

A pressure gauge mounted at a bottom tap on an open-air vessel will read Head pressure, yes. This pressure is dependant on the Specific Gravity of the fluid in the vessel, to convert to level.

Level elevation distance = Head measurement / S.G

Say the level Gauge (or Transmitter) reads 119.78 inches

Specific Gravity of the Fluid = 1.133

119.78/1.133 = 105.72 inches (actual)
