# Calibration of load cells

**URL:** <https://forumautomation.com/t/calibration-of-load-cells/965>\
**Category:** Field Instrumentation\
**Created:** [April 6, 2016, 3:25pm UTC](https://forumautomation.com/t/calibration-of-load-cells/965 "2016-04-06T15:25:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![stanley36](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ea666f/32.png) [@stanley36](https://forumautomation.com/u/stanley36)\
**Post date:** [April 6, 2016, 3:25pm UTC](https://forumautomation.com/t/calibration-of-load-cells/965/1 "2016-04-06T15:25:27Z")

</div>

How do you calibrate or check the calibration of vessel weighing system. I believe you can hang test weights off them but how are these generally mounted and are the weights sufficient to make a serious change in output. Any other info about loads cells would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [April 7, 2016, 5:10am UTC](https://forumautomation.com/t/calibration-of-load-cells/965/2 "2016-04-07T05:10:27Z")

</div>

[![](https://img.youtube.com/vi/gfSx1GCuZn8/maxresdefault.jpg "Load Cells for Accurate, Trouble-Free Tank Weighing") ](https://www.youtube.com/watch?v=gfSx1GCuZn8)

---

<div class="post-metadata">

**Author:** ![stanley36](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ea666f/32.png) [@stanley36](https://forumautomation.com/u/stanley36)\
**Post date:** [April 7, 2016, 8:15am UTC](https://forumautomation.com/t/calibration-of-load-cells/965/3 "2016-04-07T08:15:20Z")

</div>

Thanks for the video, I couldn’t find anything in that answers my question though :-(.
