# Bently Neveda Vibration Probe

**URL:** <https://forumautomation.com/t/bently-neveda-vibration-probe/424>\
**Category:** Field Instrumentation\
**Created:** [May 17, 2015, 4:59pm UTC](https://forumautomation.com/t/bently-neveda-vibration-probe/424 "2015-05-17T16:59:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gchhajed](https://forumautomation.com/letter_avatar_proxy/v4/letter/g/dc4da7/32.png) [@gchhajed](https://forumautomation.com/u/gchhajed)\
**Post date:** [May 17, 2015, 4:59pm UTC](https://forumautomation.com/t/bently-neveda-vibration-probe/424/1 "2015-05-17T16:59:06Z")

</div>

What is the relation between probe length, extension cable length, & proximitor length? is there any combination in which these three are used?

---

<div class="post-metadata">

**Author:** ![Ahmed\_Gamal\_Gad](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/3ab097/32.png) [@Ahmed\_Gamal\_Gad](https://forumautomation.com/u/Ahmed_Gamal_Gad)\
**Post date:** [May 17, 2015, 5:51pm UTC](https://forumautomation.com/t/bently-neveda-vibration-probe/424/2 "2015-05-17T17:51:09Z")

</div>

On the proximitor , there must be system length which is 5 m or 9 m for example.

That means (length of probe + length of extension cable = system length )

---

<div class="post-metadata">

**Author:** ![gchhajed](https://forumautomation.com/letter_avatar_proxy/v4/letter/g/dc4da7/32.png) [@gchhajed](https://forumautomation.com/u/gchhajed)\
**Post date:** [May 18, 2015, 3:12pm UTC](https://forumautomation.com/t/bently-neveda-vibration-probe/424/3 "2015-05-18T15:12:52Z")

</div>

Thanks Ahmed, please confirm what system length is supported by proximitor of model no. 330180-X1-05?
