# Basics of Torque measurement

**URL:** <https://forumautomation.com/t/basics-of-torque-measurement/1664>\
**Category:** Field Instrumentation\
**Tags:** interviewquestions\
**Created:** [January 15, 2017, 6:20am UTC](https://forumautomation.com/t/basics-of-torque-measurement/1664 "2017-01-15T06:20:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [January 15, 2017, 6:20am UTC](https://forumautomation.com/t/basics-of-torque-measurement/1664/1 "2017-01-15T06:20:01Z")

</div>

A torque sensor measure the twist or windup between a rotating drive source and load source such as engine crankshaft or bicycle pedal.

Torque = Force \* Distance

4 Main torque sensor designs

1. Hollow cruciform 2.Solid Square shaft 3.Radial spoke 4.Hollow tubular

 ![](https://cdn.forumautomation.com/original/1X/840239ef0c078b1ca2a0673cb26650946bafcf2e.jpg)

Types of Torque Sensors 1.Reaction Torque Sensor 2.Rotary torque sensor
