# Alarm Acknowledge circuit in LOGOSoft V8

**URL:** <https://forumautomation.com/t/alarm-acknowledge-circuit-in-logosoft-v8/1564>\
**Category:** Siemens\
**Created:** [December 14, 2016, 2:45pm UTC](https://forumautomation.com/t/alarm-acknowledge-circuit-in-logosoft-v8/1564 "2016-12-14T14:45:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![steven](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/94ad74/32.png) [@steven](https://forumautomation.com/u/steven)\
**Post date:** [December 14, 2016, 2:45pm UTC](https://forumautomation.com/t/alarm-acknowledge-circuit-in-logosoft-v8/1564/1 "2016-12-14T14:45:34Z")

</div>

Hi

I am new to PLC’s and I am trying to program a small Siemens LOGO PLC with the use of their LOGOSoft software in the wiring diagram section

I am trying to design a simple alarm system for low water level on a tank. the tank will have a float switch, when the level drops it closes the switch and sounds an alarm and flashing light. What I wanted to do is when the switch closes, and both the light and siren is running, I want to be able to silence the siren for 5 minutes and if the tank level is still low the siren will sound again.

I have been trying to figure out what type of timer to use but I have been struggling to find the right way to do it.

Any Help would be greatly appreciated.

Best Regards

Steven

---

<div class="post-metadata">

**Author:** ![Mengo\_Xiong](https://forumautomation.com/letter_avatar_proxy/v4/letter/m/54ee81/32.png) [@Mengo\_Xiong](https://forumautomation.com/u/Mengo_Xiong)\
**Post date:** [January 14, 2019, 8:43pm UTC](https://forumautomation.com/t/alarm-acknowledge-circuit-in-logosoft-v8/1564/2 "2019-01-14T20:43:10Z")

</div>

in logo you can use a system function in the function to show a display of text when it energized. give me a detail of what you’re trying to achieved and I can make you a simple program sample
