# Advantages and disadvantages of a turbine meter Vs an orifice plate flow measurement

**URL:** <https://forumautomation.com/t/advantages-and-disadvantages-of-a-turbine-meter-vs-an-orifice-plate-flow-measurement/80>\
**Category:** Flow Measurement\
**Created:** [October 2, 2014, 6:15pm UTC](https://forumautomation.com/t/advantages-and-disadvantages-of-a-turbine-meter-vs-an-orifice-plate-flow-measurement/80 "2014-10-02T18:15:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 2, 2014, 6:15pm UTC](https://forumautomation.com/t/advantages-and-disadvantages-of-a-turbine-meter-vs-an-orifice-plate-flow-measurement/80/1 "2014-10-02T18:15:32Z")

</div>

Turbine meter is a good flow measuring unit when the fluid is low clean fluid. The turbine meter measures the volumetric flow. It is directly installed on the flow line. Its accuracy in flow measurement is high. Accuracy can be re-calculated and the ‘k’ factor can be reset periodically
