# PLC (Programmable Logic Controllers) **URL:** https://forumautomation.com/c/plc-programmable-logic-controllers/6.md?page=5 [Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md) **Page:** 6 --- ## [How does a PLC communicate with other devices?](https://forumautomation.com/t/how-does-a-plc-communicate-with-other-devices/11831)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [February 28, 2024, 5:39am UTC](https://forumautomation.com/t/how-does-a-plc-communicate-with-other-devices/11831 "2024-02-28T05:39:34Z")
Programmable Logic Controllers (PLCs) use a wide range of methods to interface with other devices, allowing them to serve as the fundamental basis of automated systems. Here’s an overview of the important features: C… --- ## [Connect an RS 485 Encoder to the S7-200 PPI Interface](https://forumautomation.com/t/connect-an-rs-485-encoder-to-the-s7-200-ppi-interface/222)
**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\ **Replies:** 0\ **Last updated:** [January 1, 2015, 4:35pm UTC](https://forumautomation.com/t/connect-an-rs-485-encoder-to-the-s7-200-ppi-interface/222 "2015-01-01T16:35:21Z")
Cable diagram: --- ## [How a TON (Timer on Delay) instruction works in PLC?](https://forumautomation.com/t/how-a-ton-timer-on-delay-instruction-works-in-plc/11777)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [February 9, 2024, 3:38pm UTC](https://forumautomation.com/t/how-a-ton-timer-on-delay-instruction-works-in-plc/11777 "2024-02-09T15:38:06Z")
In PLC programming, Timer instructions are utilized to delay signals by a set length of time. After Bit instructions, Timers are considered to be the most essential PLC programming concepts to understand. TON (Timer on… --- ## [Is there any difference in programming of S7 300 and S7 1200 PLC?](https://forumautomation.com/t/is-there-any-difference-in-programming-of-s7-300-and-s7-1200-plc/12754)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [October 31, 2024, 6:26am UTC](https://forumautomation.com/t/is-there-any-difference-in-programming-of-s7-300-and-s7-1200-plc/12754 "2024-10-31T06:26:18Z")
Is there any difference in programming of S7 300 and S7 1200 PLC? --- ## [Why 24V DC used in PLC?](https://forumautomation.com/t/why-24v-dc-used-in-plc/12361)
**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\ **Replies:** 1\ **Last updated:** [August 9, 2024, 2:42am UTC](https://forumautomation.com/t/why-24v-dc-used-in-plc/12361 "2024-08-09T02:42:19Z")
Why 24V DC used in PLC? --- ## [Explain the Benefits of the 2080-LC20-20QBB Controller in Industrial Automation](https://forumautomation.com/t/explain-the-benefits-of-the-2080-lc20-20qbb-controller-in-industrial-automation/11670)
**Author:** [@shraddha123](https://forumautomation.com/u/shraddha123)\ **Replies:** 1\ **Last updated:** [June 6, 2026, 5:50am UTC](https://forumautomation.com/t/explain-the-benefits-of-the-2080-lc20-20qbb-controller-in-industrial-automation/11670 "2026-06-06T05:50:17Z")
The selection of an appropriate control system may have a significant impact on improving productivity, streamlining procedures, and guaranteeing uninterrupted operations in the quickly changing field of industrial aut… --- ## [How to make Ladder Program. Conveyor Crossing line?](https://forumautomation.com/t/how-to-make-ladder-program-conveyor-crossing-line/8705)
**Author:** [@denizen](https://forumautomation.com/u/denizen)\ **Replies:** 2\ **Last updated:** [October 23, 2020, 5:45am UTC](https://forumautomation.com/t/how-to-make-ladder-program-conveyor-crossing-line/8705 "2020-10-23T05:45:15Z")
How to make Ladder Program. Conveyor Crossing line …Two input Signal and one output. When man crossing transmitter and receiver signal one side when sense then Set and conveyor stop and after cross conveyor line reset an… --- ## [PLC - Deadman Switch](https://forumautomation.com/t/plc-deadman-switch/11746)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [January 30, 2024, 2:09pm UTC](https://forumautomation.com/t/plc-deadman-switch/11746 "2024-01-30T14:09:45Z")
Deadman Switch A deadman switch, sometimes referred to as an emergency stop switch or a deadman’s switch, is a safety device that allows a machine or process to be stopped immediately in the case of a danger or emergency… --- ## [What is the role of the CPU in a PLC?](https://forumautomation.com/t/what-is-the-role-of-the-cpu-in-a-plc/12957)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [January 16, 2025, 9:27am UTC](https://forumautomation.com/t/what-is-the-role-of-the-cpu-in-a-plc/12957 "2025-01-16T09:27:45Z")
What is the role of the CPU in a PLC? --- ## [Absolute encoder for Siemens Logo](https://forumautomation.com/t/absolute-encoder-for-siemens-logo/6552)
**Author:** [@Perilun](https://forumautomation.com/u/Perilun)\ **Replies:** 0\ **Last updated:** [June 13, 2019, 10:51pm UTC](https://forumautomation.com/t/absolute-encoder-for-siemens-logo/6552 "2019-06-13T22:51:21Z")
Hello to everyone, i am new to this forum and have the following problem: I am trying to make a little control system for a test rig. The test rig should be controlled with the help of a siemens lego 24 VDC. For measur… --- ## [What is the function of a PLC input interface module?](https://forumautomation.com/t/what-is-the-function-of-a-plc-input-interface-module/11897)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 0\ **Last updated:** [March 23, 2024, 4:25am UTC](https://forumautomation.com/t/what-is-the-function-of-a-plc-input-interface-module/11897 "2024-03-23T04:25:33Z")
What is the function of a PLC input interface module? A PLC (Programmable Logic Controller) input interface module serves as a bridge between the physical world and the digital realm of the PLC. Its primary function … --- ## [Help me in B&R PLC](https://forumautomation.com/t/help-me-in-b-r-plc/11846)
**Author:** [@mannotepro](https://forumautomation.com/u/mannotepro)\ **Replies:** 2\ **Last updated:** [March 11, 2024, 8:57pm UTC](https://forumautomation.com/t/help-me-in-b-r-plc/11846 "2024-03-11T20:57:17Z")
\*\*I have PLC B&R CP476 and I try to deal with it by automation studio as downloading and uploading by programming cable , so download program and connection successfully but it doesn’t upload \*\* I can’t understand why ??… --- ## [Siemens PLC S400 Addresses 2 and 3 reserved?](https://forumautomation.com/t/siemens-plc-s400-addresses-2-and-3-reserved/480)
**Author:** [@TheFlem](https://forumautomation.com/u/TheFlem)\ **Replies:** 0\ **Last updated:** [August 5, 2015, 11:44pm UTC](https://forumautomation.com/t/siemens-plc-s400-addresses-2-and-3-reserved/480 "2015-08-05T23:44:50Z")
Hi there, I have a Step 7 PLC S400, I know Slots 2 and 3 are reserved making the first I/O slot 4, however, when I assign a module to slot 4 the address defaults to I0 and I1, I de-select the DEFAULT ADDRESS check mark a… --- ## [What is PLC Memory? Explain Types of PLC Memory](https://forumautomation.com/t/what-is-plc-memory-explain-types-of-plc-memory/12926)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [January 2, 2025, 2:01pm UTC](https://forumautomation.com/t/what-is-plc-memory-explain-types-of-plc-memory/12926 "2025-01-02T14:01:05Z")
What Is PLC Memory? The portion of a programmable logic controller known as the PLC memory is responsible for storing data, information, and programmable instructions. It encompasses a variety of memory types, includin… --- ## [Help in ladder logic](https://forumautomation.com/t/help-in-ladder-logic/499)
**Author:** [@Saadkaz](https://forumautomation.com/u/Saadkaz)\ **Replies:** 0\ **Last updated:** [October 1, 2015, 2:04am UTC](https://forumautomation.com/t/help-in-ladder-logic/499 "2015-10-01T02:04:32Z")
Hello folks i am currently undergoing a training in plc and i have an issue with one of my assignment it would be lovely if anyone could help me out with it A cut to length machine is programmed to cut a sheet to unwrap … --- ## [How often should you change a PLC battery?](https://forumautomation.com/t/how-often-should-you-change-a-plc-battery/12953)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [January 24, 2025, 6:54am UTC](https://forumautomation.com/t/how-often-should-you-change-a-plc-battery/12953 "2025-01-24T06:54:42Z")
How often should you change a PLC battery? --- ## [When using a temporary Connect to the Honeywell SM(Safety Manager), the QPP only receives it system number](https://forumautomation.com/t/when-using-a-temporary-connect-to-the-honeywell-sm-safety-manager-the-qpp-only-receives-it-system-number/334)
**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\ **Replies:** 0\ **Last updated:** [March 20, 2015, 10:35am UTC](https://forumautomation.com/t/when-using-a-temporary-connect-to-the-honeywell-sm-safety-manager-the-qpp-only-receives-it-system-number/334 "2015-03-20T10:35:12Z")
If you can start the temporary download and the system number is received by the QPP, the wiring must be correct. Most likely there is another program installed on your PC that interferes with the download. Applications… --- ## [What are ladder diagrams and sequence listing?](https://forumautomation.com/t/what-are-ladder-diagrams-and-sequence-listing/13173)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [April 24, 2025, 9:29am UTC](https://forumautomation.com/t/what-are-ladder-diagrams-and-sequence-listing/13173 "2025-04-24T09:29:49Z")
What are ladder diagrams and sequence listing --- ## [How do PLC and SCADA communicate?](https://forumautomation.com/t/how-do-plc-and-scada-communicate/12345)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [August 3, 2024, 9:09am UTC](https://forumautomation.com/t/how-do-plc-and-scada-communicate/12345 "2024-08-03T09:09:45Z")
How do PLC and SCADA communicate? --- ## [Modbus connection details for interfacing Allen-Bradley SLC5 with HONEYWELL DCS](https://forumautomation.com/t/modbus-connection-details-for-interfacing-allen-bradley-slc5-with-honeywell-dcs/442)
**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\ **Replies:** 0\ **Last updated:** [June 10, 2015, 5:26pm UTC](https://forumautomation.com/t/modbus-connection-details-for-interfacing-allen-bradley-slc5-with-honeywell-dcs/442 "2015-06-10T17:26:14Z")
Modbus connection details for interfacing Allen-Bradley SLC5 with HONEYWELL DCS --- ## [Where shall I get a driver for interfacing an S7 300 PLC with InduSoft SCADA?](https://forumautomation.com/t/where-shall-i-get-a-driver-for-interfacing-an-s7-300-plc-with-indusoft-scada/12758)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [November 5, 2024, 1:43pm UTC](https://forumautomation.com/t/where-shall-i-get-a-driver-for-interfacing-an-s7-300-plc-with-indusoft-scada/12758 "2024-11-05T13:43:40Z")
Where shall I get a driver for interfacing an S7 300 PLC with InduSoft SCADA? --- ## [How can a PLC be connected to a 24V PIR sensor?](https://forumautomation.com/t/how-can-a-plc-be-connected-to-a-24v-pir-sensor/11749)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [February 1, 2024, 1:55pm UTC](https://forumautomation.com/t/how-can-a-plc-be-connected-to-a-24v-pir-sensor/11749 "2024-02-01T13:55:04Z")
Connecting a 24V PIR (Passive Infrared) sensor to a PLC (Programmable Logic Controller) normally involves the following 6 steps: Step-1: Power Supply: Make sure that PLC has a compatible power supply that can provide… --- ## [Teco SG2 (nano)PLC family](https://forumautomation.com/t/teco-sg2-nano-plc-family/11620)
**Author:** [@G\_A](https://forumautomation.com/u/G_A)\ **Replies:** 1\ **Last updated:** [February 19, 2025, 3:43am UTC](https://forumautomation.com/t/teco-sg2-nano-plc-family/11620 "2025-02-19T03:43:06Z")
Hi all! Did anyone try to use the Modbus features on these controllers? Manufacturer seems to have disappeared so peer support is all that (may) still exist. Thanks in advance for any tips. --- ## [ET200SP CM module problem](https://forumautomation.com/t/et200sp-cm-module-problem/12465)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [August 26, 2024, 4:47pm UTC](https://forumautomation.com/t/et200sp-cm-module-problem/12465 "2024-08-26T16:47:09Z")
I’m having trouble with an ET200SP CM4xIO link device. The F signal is flashing on the CM module, indicating a port error according to the manual. I’ve checked all the cables and even replaced the connected sensors with … --- ## [Problems related to S7300 PLC](https://forumautomation.com/t/problems-related-to-s7300-plc/9571)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [July 8, 2021, 5:15am UTC](https://forumautomation.com/t/problems-related-to-s7300-plc/9571 "2021-07-08T05:15:37Z")
By using s7300 plc with scada wincc explorer in profibus system and with IM extension modules I have check address by reference display it is shows address 47.0 and 42 but in hardware setting when I want to find out whic… --- ## [What is the operation sequence of a PLC and how does it work?](https://forumautomation.com/t/what-is-the-operation-sequence-of-a-plc-and-how-does-it-work/12734)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [October 23, 2024, 2:26pm UTC](https://forumautomation.com/t/what-is-the-operation-sequence-of-a-plc-and-how-does-it-work/12734 "2024-10-23T14:26:11Z")
A PLC (Programmable Logic Controller) uses a cyclic sequence referred to as the scan cycle, which includes the following fundamental steps: Input Scan The PLC checks the status of all input devices linked to it, in… --- ## [Analog input in PLC programming](https://forumautomation.com/t/analog-input-in-plc-programming/9433)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [May 26, 2021, 4:16am UTC](https://forumautomation.com/t/analog-input-in-plc-programming/9433 "2021-05-26T04:16:02Z")
is this scaling of analog input PIW290? --- ## [What is a PLC ?(Programmable Logic Controllers )](https://forumautomation.com/t/what-is-a-plc-programmable-logic-controllers/429)
**Author:** [@denizen](https://forumautomation.com/u/denizen)\ **Replies:** 0\ **Last updated:** [May 20, 2015, 4:11am UTC](https://forumautomation.com/t/what-is-a-plc-programmable-logic-controllers/429 "2015-05-20T04:11:33Z")
PLC stands for programmable logic controller. A PLC can be defined as an industrialized computer that includes the hardware and software required to automatically control production equipment,machinery, processes and ot… --- ## [How to transfer program from controller to memory with RS Logix](https://forumautomation.com/t/how-to-transfer-program-from-controller-to-memory-with-rs-logix/2812)
**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\ **Replies:** 0\ **Last updated:** [December 13, 2017, 7:44pm UTC](https://forumautomation.com/t/how-to-transfer-program-from-controller-to-memory-with-rs-logix/2812 "2017-12-13T19:44:33Z")
Before trying to transfer program we must check whether the controller is in program mode. The program can transfer only in the program mode, not in running mode. Go to Controller organizer \>\> I/O configuration \>\> Se… --- ## [Connecting a sensore to digital input](https://forumautomation.com/t/connecting-a-sensore-to-digital-input/1768)
**Author:** [@kenny](https://forumautomation.com/u/kenny)\ **Replies:** 0\ **Last updated:** [February 17, 2017, 10:40pm UTC](https://forumautomation.com/t/connecting-a-sensore-to-digital-input/1768 "2017-02-17T22:40:47Z")
We are 3 guys doing our bacholer in automation, and we are trying to buy a siemens starter kit to use a s7-1200 with hmi and a di add-on(cheapest) to control 16 npn sensor(diffuse photo sensors analog). We are wondering … --- ## [Is it possible to control a stepper through a stepper driver by using a PLC](https://forumautomation.com/t/is-it-possible-to-control-a-stepper-through-a-stepper-driver-by-using-a-plc/9277)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [March 24, 2021, 10:28am UTC](https://forumautomation.com/t/is-it-possible-to-control-a-stepper-through-a-stepper-driver-by-using-a-plc/9277 "2021-03-24T10:28:10Z")
I want to use a Delta PLC (DVP12SE11T) to control a stepper through a stepper driver. I cannot find the output voltage (pwm) of the PLC, can a stepper driver handle 24v pulse (assuming the plc outputs 24v on the pwm)? I… --- ## [What is the MTBF for the Logic Managert(LM)/IPC power supplies?](https://forumautomation.com/t/what-is-the-mtbf-for-the-logic-managert-lm-ipc-power-supplies/323)
**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\ **Replies:** 0\ **Last updated:** [March 20, 2015, 9:56am UTC](https://forumautomation.com/t/what-is-the-mtbf-for-the-logic-managert-lm-ipc-power-supplies/323 "2015-03-20T09:56:34Z")
620-0036 119000 hours (about 13.5 years); 621-9931 235000 hours (about 27 years) and 621-9934 330000 hours (about 37 years). --- ## [Lost plc program](https://forumautomation.com/t/lost-plc-program/12563)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [September 14, 2024, 6:52am UTC](https://forumautomation.com/t/lost-plc-program/12563 "2024-09-14T06:52:51Z")
Went on a service call this morning for red lights flashing on a plc and no io working. I went into the plant and tried to upload the program, it said no program was in the plc When I look at the manual for why thos… --- ## [Structured Text Programming in PLC](https://forumautomation.com/t/structured-text-programming-in-plc/11760)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [February 5, 2024, 11:01am UTC](https://forumautomation.com/t/structured-text-programming-in-plc/11760 "2024-02-05T11:01:29Z")
PLCs (Programmable Logic Controllers) provide a high-level text-based language for control logic programming called Structured Text (ST) programming. It provides an organized method for developing code, which facilitates… --- ## [Using High speed counters with Limes LI20](https://forumautomation.com/t/using-high-speed-counters-with-limes-li20/1687)
**Author:** [@Yoon](https://forumautomation.com/u/Yoon)\ **Replies:** 0\ **Last updated:** [January 20, 2017, 6:59am UTC](https://forumautomation.com/t/using-high-speed-counters-with-limes-li20/1687 "2017-01-20T06:59:05Z")
Hi. I’m trying to configuration HSC Step7 feature with Limes LI20 counter (https://www.kuebler.com/PDFs/leaflet/drehgeber/english/Limes\_LI20\_B1\_en.pdf) to calculate distance (motor rotates circular plate right or left). … --- ## [Configuration Tool for Siemens SINAMICS BOP-2 Control Unit](https://forumautomation.com/t/configuration-tool-for-siemens-sinamics-bop-2-control-unit/1223)
**Author:** [@abberttude316](https://forumautomation.com/u/abberttude316)\ **Replies:** 0\ **Last updated:** [August 5, 2016, 6:07am UTC](https://forumautomation.com/t/configuration-tool-for-siemens-sinamics-bop-2-control-unit/1223 "2016-08-05T06:07:46Z")
Can someone please post link to the sinamics CU240E-2 PN Configuration software? thanks in advance. --- ## [B&R automation studio Programming Load cell with C](https://forumautomation.com/t/b-r-automation-studio-programming-load-cell-with-c/2003)
**Author:** [@sunshine2017](https://forumautomation.com/u/sunshine2017)\ **Replies:** 0\ **Last updated:** [May 19, 2017, 6:32am UTC](https://forumautomation.com/t/b-r-automation-studio-programming-load-cell-with-c/2003 "2017-05-19T06:32:21Z")
Hi I am programming a Loadcell using B&R Automation Studio in C. I have found out the builtin function which is WghScale. I have included the library and created a local structure so that i can use the variables. Assigne… --- ## [Measuring electrical variables with S7-1200](https://forumautomation.com/t/measuring-electrical-variables-with-s7-1200/2766)
**Author:** [@RickSk](https://forumautomation.com/u/RickSk)\ **Replies:** 0\ **Last updated:** [December 4, 2017, 3:42pm UTC](https://forumautomation.com/t/measuring-electrical-variables-with-s7-1200/2766 "2017-12-04T15:42:03Z")
Good day, I plan to implement a project with an S7-1200 where I measure the electrical variables in the utility lines of a residence (voltage, current, frequency, power) and apply certain control actions in response to … --- ## [Sensors and Stepper motor](https://forumautomation.com/t/sensors-and-stepper-motor/1576)
**Author:** [@Rahul\_Ravi](https://forumautomation.com/u/Rahul_Ravi)\ **Replies:** 0\ **Last updated:** [December 17, 2016, 5:37pm UTC](https://forumautomation.com/t/sensors-and-stepper-motor/1576 "2016-12-17T17:37:46Z")
Can sensors of Arduino and stepper motors of arduino be used with PLC’s ? --- ## [What is SCAN in PLC? What is Scan Time?](https://forumautomation.com/t/what-is-scan-in-plc-what-is-scan-time/12183)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [June 20, 2024, 2:33am UTC](https://forumautomation.com/t/what-is-scan-in-plc-what-is-scan-time/12183 "2024-06-20T02:33:02Z")
\[color=#f80404\]What is SCAN in PLC? \[/color\] The PLC scan, commonly referred to as the PLC program scan, is the procedure whereby the PLC controller continually performs the following steps: Step-1: Reads input device s… --- ## [Difference Between Modular Type PLC & Standalone Integrated-Type PLC](https://forumautomation.com/t/difference-between-modular-type-plc-standalone-integrated-type-plc/11770)
**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\ **Replies:** 0\ **Last updated:** [February 7, 2024, 7:23am UTC](https://forumautomation.com/t/difference-between-modular-type-plc-standalone-integrated-type-plc/11770 "2024-02-07T07:23:09Z")
What is Modular Type PLC? A modular type PLC is a programmable logic controller system comprised of independent modules that perform specific functions such as processing, input/output, communication, (or) specialized fu… --- ## [What is a GSD file in TIA portal](https://forumautomation.com/t/what-is-a-gsd-file-in-tia-portal/9231)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [March 8, 2021, 5:20am UTC](https://forumautomation.com/t/what-is-a-gsd-file-in-tia-portal/9231 "2021-03-08T05:20:20Z")
Explain the GSD file in the TIA portal --- ## [Selection of Allen Bradley kit (UPDATE)](https://forumautomation.com/t/selection-of-allen-bradley-kit-update/6656)
**Author:** [@The\_Sword](https://forumautomation.com/u/The_Sword)\ **Replies:** 0\ **Last updated:** [July 3, 2019, 7:49am UTC](https://forumautomation.com/t/selection-of-allen-bradley-kit-update/6656 "2019-07-03T07:49:31Z")
I have : 2 Allen Bradley Micrologix 1200 1762L24BWA Used once, Excellent cond. 2 Allen Bradley AIC+ 1761-NET-AIC Used once, Excellent cond. 1 Allen Bradley Panelview C600 (t6c) colour touchscreen … --- ## [Problems related to connecting the PLC CPU to TIA portal](https://forumautomation.com/t/problems-related-to-connecting-the-plc-cpu-to-tia-portal/9344)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [April 22, 2021, 4:27am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-plc-cpu-to-tia-portal/9344 "2021-04-22T04:27:11Z")
What is the possible problem and solution concerning this PLC CPU, which is always in connecting status unless you turn off the power, can not connect to TIA portal and also there is a flickering orange light. . --- ## [PLC typical instructions](https://forumautomation.com/t/plc-typical-instructions/2602)
**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\ **Replies:** 0\ **Last updated:** [November 7, 2017, 9:11pm UTC](https://forumautomation.com/t/plc-typical-instructions/2602 "2017-11-07T21:11:31Z")
XIC ( Examine ON): Examine a bit for an ON condition. XIO (Examine OFF): Examine a bit for OFF condition. OTE (Output energize): Turn ON a bit ( non retentive) OTL (Output latch): Latch a bit (retentive) OTU (outpu… --- ## [What are the cyber security precautions i have to take while programming PLC?](https://forumautomation.com/t/what-are-the-cyber-security-precautions-i-have-to-take-while-programming-plc/12125)
**Author:** [@denizen](https://forumautomation.com/u/denizen)\ **Replies:** 1\ **Last updated:** [June 10, 2024, 3:42pm UTC](https://forumautomation.com/t/what-are-the-cyber-security-precautions-i-have-to-take-while-programming-plc/12125 "2024-06-10T15:42:59Z")
Is there any guidelines available for PLC Cyber security? Any security standards available from ISA or national cyber security protection system? --- ## [What are I/O modules, and what purpose do they serve in PLC systems?](https://forumautomation.com/t/what-are-i-o-modules-and-what-purpose-do-they-serve-in-plc-systems/12432)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [August 17, 2024, 7:17am UTC](https://forumautomation.com/t/what-are-i-o-modules-and-what-purpose-do-they-serve-in-plc-systems/12432 "2024-08-17T07:17:05Z")
What are I/O modules, and what purpose do they serve in PLC systems? --- ## [What is an accumulator in PLC?](https://forumautomation.com/t/what-is-an-accumulator-in-plc/13187)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [May 10, 2025, 5:15am UTC](https://forumautomation.com/t/what-is-an-accumulator-in-plc/13187 "2025-05-10T05:15:01Z")
What is an accumulator in PLC? --- ## [How to solve the problems related to PLC uploading](https://forumautomation.com/t/how-to-solve-the-problems-related-to-plc-uploading/9131)
**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\ **Replies:** 1\ **Last updated:** [February 4, 2021, 11:17am UTC](https://forumautomation.com/t/how-to-solve-the-problems-related-to-plc-uploading/9131 "2021-02-04T11:17:59Z")
This is the message that comes to display when i try to go online or upload my plc s7 1200 project. --- ## [What is the function of analog input in PLC?](https://forumautomation.com/t/what-is-the-function-of-analog-input-in-plc/12810)
**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\ **Replies:** 1\ **Last updated:** [November 12, 2024, 2:18pm UTC](https://forumautomation.com/t/what-is-the-function-of-analog-input-in-plc/12810 "2024-11-12T14:18:29Z")
What is the function of analog input in PLC? [Previous page](https://forumautomation.com/c/plc-programmable-logic-controllers/6.md?page=4&per_page=50) [Next page](https://forumautomation.com/c/plc-programmable-logic-controllers/6.md?page=6&per_page=50)