# Industrial Automation

**URL:** https://forumautomation.com/c/industrial-automation/7.md?page=7

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 8

---

## [In search of a temperature controller with event triggered output](https://forumautomation.com/t/in-search-of-a-temperature-controller-with-event-triggered-output/7326)

<div class="topic-metadata">

**Author:** [@Tsuo97](https://forumautomation.com/u/Tsuo97)\
**Replies:** 1\
**Last updated:** [January 2, 2021, 6:21pm UTC](https://forumautomation.com/t/in-search-of-a-temperature-controller-with-event-triggered-output/7326 "2021-01-02T18:21:30Z")

</div>

Hi guys! I was searching between the SOLO, Omron, Process Technology and Autonics temperature controllers for one which could handle an event triggered output. Is there a controller which triggers an output once the set…

---

## [What is ICS Environment?](https://forumautomation.com/t/what-is-ics-environment/12590)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 19, 2024, 4:34am UTC](https://forumautomation.com/t/what-is-ics-environment/12590 "2024-09-19T04:34:33Z")

</div>

What is ICS Environment?

---

## [Troubleshooting Problem During Commissioning of Speed Measurement Proximity in VFD Control in Conveyor](https://forumautomation.com/t/troubleshooting-problem-during-commissioning-of-speed-measurement-proximity-in-vfd-control-in-conveyor/12254)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 1\
**Last updated:** [July 11, 2024, 5:13pm UTC](https://forumautomation.com/t/troubleshooting-problem-during-commissioning-of-speed-measurement-proximity-in-vfd-control-in-conveyor/12254 "2024-07-11T17:13:09Z")

</div>

Troubleshooting Problem During Commissioning of Speed Measurement Proximity in VFD Control in Conveyor Problem: During the commissioning of a conveyor system controlled by a Variable Frequency Drive (VFD), the speed m…

---

## [How to check Ghost Network ports and devices in a Control System Supervisory Node (workstation or client )?](https://forumautomation.com/t/how-to-check-ghost-network-ports-and-devices-in-a-control-system-supervisory-node-workstation-or-client/290)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [March 5, 2015, 6:44pm UTC](https://forumautomation.com/t/how-to-check-ghost-network-ports-and-devices-in-a-control-system-supervisory-node-workstation-or-client/290 "2015-03-05T18:44:56Z")

</div>

Ghost network interface ports may cause problems in your control system network. Procedure for checking ghost devices in your Control system supervisory nodes like Server / Client open cmd prompt as admin set devmgr\_sho…

---

## [Fool Proof Controller, Electronic Controller in Process Control Industry](https://forumautomation.com/t/fool-proof-controller-electronic-controller-in-process-control-industry/10990)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [March 22, 2023, 3:16pm UTC](https://forumautomation.com/t/fool-proof-controller-electronic-controller-in-process-control-industry/10990 "2023-03-22T15:16:37Z")

</div>

There are two main reasons industries automate manufacturing and fulfillment processes. Firstly, manual operations are expensive, and employee talents might be better allocated if repetitive jobs are done by machine…

---

## [In AutoCAD, what does a snap mean? What is the purpose of it?](https://forumautomation.com/t/in-autocad-what-does-a-snap-mean-what-is-the-purpose-of-it/11788)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [February 13, 2024, 8:15am UTC](https://forumautomation.com/t/in-autocad-what-does-a-snap-mean-what-is-the-purpose-of-it/11788 "2024-02-13T08:15:18Z")

</div>

What is a Snap in AutoCAD? In AutoCAD, a “snap” is a feature that enables for accurate alignment & positioning of objects (or) points in a drawing. When the snap function is turned on, the pointer will “snap” to specifie…

---

## [What is a black box testing and white box testing in automation](https://forumautomation.com/t/what-is-a-black-box-testing-and-white-box-testing-in-automation/9463)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [June 2, 2021, 6:43am UTC](https://forumautomation.com/t/what-is-a-black-box-testing-and-white-box-testing-in-automation/9463 "2021-06-02T06:43:58Z")

</div>

The automation testing that we do over the web with the help of selenium comes under black box testing or white box testing?

---

## [What is the difference between emergency stop and emergency power off?](https://forumautomation.com/t/what-is-the-difference-between-emergency-stop-and-emergency-power-off/13105)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [April 18, 2025, 2:44pm UTC](https://forumautomation.com/t/what-is-the-difference-between-emergency-stop-and-emergency-power-off/13105 "2025-04-18T14:44:18Z")

</div>

What is the difference between emergency stop and emergency power off?

---

## [Dual Accelerometer input RMS Monitor Calibration](https://forumautomation.com/t/dual-accelerometer-input-rms-monitor-calibration/196)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 15, 2014, 8:59am UTC](https://forumautomation.com/t/dual-accelerometer-input-rms-monitor-calibration/196 "2014-12-15T08:59:53Z")

</div>

Disconnect com and in wiring from the channel A terminals on the signal input relay module. Connect function generator to com and in with polarity. Set filter options for no filter. Adjust function generator t…

---

## [Sony Magnescale](https://forumautomation.com/t/sony-magnescale/1372)

<div class="topic-metadata">

**Author:** [@SPaz](https://forumautomation.com/u/SPaz)\
**Replies:** 0\
**Last updated:** [September 18, 2016, 3:35pm UTC](https://forumautomation.com/t/sony-magnescale/1372 "2016-09-18T15:35:41Z")

</div>

Trying to replace a faulty LT10-205C Sony counter unit. Tried to go with current LT10a-205C. Could never get serial comms to work. Finally found the direct replacement. Identical com settings. Old one works fine as far a…

---

## [How to replace LGR1000 with G5CE? TIA!](https://forumautomation.com/t/how-to-replace-lgr1000-with-g5ce-tia/9439)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [May 28, 2021, 3:27am UTC](https://forumautomation.com/t/how-to-replace-lgr1000-with-g5ce-tia/9439 "2021-05-28T03:27:18Z")

</div>

ALC Question: What are the steps to do for replacing LGR1000 with G5CE? TIA!

---

## [ISO 13849-1 and ISO 13849-2 Safety of Machinery Standards](https://forumautomation.com/t/iso-13849-1-and-iso-13849-2-safety-of-machinery-standards/3128)

<div class="topic-metadata">

**Author:** [@terrance\_c93](https://forumautomation.com/u/terrance_c93)\
**Replies:** 0\
**Last updated:** [February 12, 2018, 6:37pm UTC](https://forumautomation.com/t/iso-13849-1-and-iso-13849-2-safety-of-machinery-standards/3128 "2018-02-12T18:37:35Z")

</div>

I am having trouble understanding these standards fully. It would be nice to have guidance from someone with existing knowledge.

---

## [Potato Flow Rate Monitoring System](https://forumautomation.com/t/potato-flow-rate-monitoring-system/1473)

<div class="topic-metadata">

**Author:** [@Engineer\_LEO](https://forumautomation.com/u/Engineer_LEO)\
**Replies:** 0\
**Last updated:** [October 31, 2016, 9:33am UTC](https://forumautomation.com/t/potato-flow-rate-monitoring-system/1473 "2016-10-31T09:33:28Z")

</div>

i want to measure the flow rate of potato on a Vertical inclined conveyor. i Have selected these: Load Cell Roller ( 7MH7126-1BB5-Z C11) Calibration Weight 7MH77241BC Speed Sensor …

---

## [Is the ALC better than other automation systems](https://forumautomation.com/t/is-the-alc-better-than-other-automation-systems/9438)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [May 27, 2021, 12:00pm UTC](https://forumautomation.com/t/is-the-alc-better-than-other-automation-systems/9438 "2021-05-27T12:00:45Z")

</div>

Can we consider the automated logic’s web-based building automation system as the best control system

---

## [Need help for modifying input on Altivar atv32](https://forumautomation.com/t/need-help-for-modifying-input-on-altivar-atv32/588)

<div class="topic-metadata">

**Author:** [@akrogh](https://forumautomation.com/u/akrogh)\
**Replies:** 0\
**Last updated:** [November 14, 2015, 2:44pm UTC](https://forumautomation.com/t/need-help-for-modifying-input-on-altivar-atv32/588 "2015-11-14T14:44:32Z")

</div>

I have tried every thing, but i i can´t find out how to modify input on Altivar atv32. i need a input to reset a Fault, but i can´t figure out how to do it

---

## [How can we make our control panel better?](https://forumautomation.com/t/how-can-we-make-our-control-panel-better/846)

<div class="topic-metadata">

**Author:** [@Lisa\_Liu](https://forumautomation.com/u/Lisa_Liu)\
**Replies:** 0\
**Last updated:** [March 10, 2016, 8:44am UTC](https://forumautomation.com/t/how-can-we-make-our-control-panel-better/846 "2016-03-10T08:44:05Z")

</div>

From the appearance what should we do? From the inner what should we do? If we want to export our panels to the foreign customers, will they be likely to choose a Chinese manufacturer like us? I will appreciate it very …

---

## [What is instrumentation?](https://forumautomation.com/t/what-is-instrumentation/3761)

<div class="topic-metadata">

**Author:** [@AbhimanyuMWarrier](https://forumautomation.com/u/AbhimanyuMWarrier)\
**Replies:** 0\
**Last updated:** [June 2, 2018, 10:47am UTC](https://forumautomation.com/t/what-is-instrumentation/3761 "2018-06-02T10:47:14Z")

</div>

WHAT IS INSTRUMENTATION? The technology of using instruments to measure and control the physical and chemical properties of materials are called Instrumentation. OR Instrumentation is the art and science of measuremen…

---

## [What are the features and benefits of CAN open bus technology](https://forumautomation.com/t/what-are-the-features-and-benefits-of-can-open-bus-technology/809)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [February 28, 2016, 8:22pm UTC](https://forumautomation.com/t/what-are-the-features-and-benefits-of-can-open-bus-technology/809 "2016-02-28T20:22:50Z")

</div>

CAN bus technology Features Has Multiple master hierarchy Benefit - For building intelligent and redundant system Provides transfer rate up to 1 Megabit/Sec Benefit - For adequate real time responses in many embedded…

---

## [What is the difference between interlock and protection?](https://forumautomation.com/t/what-is-the-difference-between-interlock-and-protection/13320)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [June 21, 2025, 5:51am UTC](https://forumautomation.com/t/what-is-the-difference-between-interlock-and-protection/13320 "2025-06-21T05:51:02Z")

</div>

What is the difference between interlock and protection?

---

## [PLC as Modbus Master with 6 HMIs as Modbus slave on Rs485](https://forumautomation.com/t/plc-as-modbus-master-with-6-hmis-as-modbus-slave-on-rs485/7131)

<div class="topic-metadata">

**Author:** [@Vilas](https://forumautomation.com/u/Vilas)\
**Replies:** 0\
**Last updated:** [September 17, 2019, 4:58am UTC](https://forumautomation.com/t/plc-as-modbus-master-with-6-hmis-as-modbus-slave-on-rs485/7131 "2019-09-17T04:58:22Z")

</div>

Hello friends, I am having a PLC as a Modbus master on serial 485 connected to 6 HMIs as slaves. I read from and write into the HMIs registers by the PLC. The application is for a passenger elevator with Ground + 4 floo…

---

## [How to protect control system from cyber attacks?](https://forumautomation.com/t/how-to-protect-control-system-from-cyber-attacks/6795)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [July 21, 2019, 12:12am UTC](https://forumautomation.com/t/how-to-protect-control-system-from-cyber-attacks/6795 "2019-07-21T00:12:11Z")

</div>

PLCs are vulnerable to cyber-attacks. Modern PLCs are connected to various business network based on the requirement. For example, monitoring the process operation remotely. Different protocols are used for accessing the…

---

## [When cable's shield grounded from one end and when from both?](https://forumautomation.com/t/when-cables-shield-grounded-from-one-end-and-when-from-both/2505)

<div class="topic-metadata">

**Author:** [@abdo2013](https://forumautomation.com/u/abdo2013)\
**Replies:** 0\
**Last updated:** [October 24, 2017, 9:21am UTC](https://forumautomation.com/t/when-cables-shield-grounded-from-one-end-and-when-from-both/2505 "2017-10-24T09:21:16Z")

</div>

When cable’s shield grounded from one end and when from both ? ??

---

## [Solution : Windows based HMI activex error](https://forumautomation.com/t/solution-windows-based-hmi-activex-error/319)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [March 18, 2015, 1:33am UTC](https://forumautomation.com/t/solution-windows-based-hmi-activex-error/319 "2015-03-18T01:33:37Z")

</div>

This solution is for Windows based HMI. When you initialize or running HMI display script you can see Activex error or warning. It keeps popping up and irritating .You can avoid this problem with a registry edit. Go to …

---

## [L-PRO 4000 Relay with ABB RTU560 Based Substation](https://forumautomation.com/t/l-pro-4000-relay-with-abb-rtu560-based-substation/794)

<div class="topic-metadata">

**Author:** [@abberttude316](https://forumautomation.com/u/abberttude316)\
**Replies:** 0\
**Last updated:** [February 22, 2016, 9:51am UTC](https://forumautomation.com/t/l-pro-4000-relay-with-abb-rtu560-based-substation/794 "2016-02-22T09:51:42Z")

</div>

I need to connect L-PRO 4000 relay with ABB RTU560 based substation having abb protection relays. Kindly tell me the steps which can be followed to do so and softwares required. I have IET600, PCM 600, ITT600 and L-PRO o…

---

## [Batch facility on a controller](https://forumautomation.com/t/batch-facility-on-a-controller/102)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 12:49pm UTC](https://forumautomation.com/t/batch-facility-on-a-controller/102 "2014-10-03T12:49:48Z")

</div>

Whenever a deviation persists for a long time the controller output saturates at the maximum of minimum output (-2.5 VDC or + 12.5 VDC/0 kPa or 140 kPa) depending on the controller action. In a normal controller when the…

---

## [How can one convert linear signals, specifically 4-20mA, 3-15 psi, and 1-5 volt signals, into square root extraction?](https://forumautomation.com/t/how-can-one-convert-linear-signals-specifically-4-20ma-3-15-psi-and-1-5-volt-signals-into-square-root-extraction/11907)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [March 26, 2024, 1:42am UTC](https://forumautomation.com/t/how-can-one-convert-linear-signals-specifically-4-20ma-3-15-psi-and-1-5-volt-signals-into-square-root-extraction/11907 "2024-03-26T01:42:26Z")

</div>

How can one convert linear signals, specifically 4-20mA, 3-15 psi, and 1-5 volt signals, into square root extraction?

---

## [What is a Fieldbus Terminator and How Does it Work?](https://forumautomation.com/t/what-is-a-fieldbus-terminator-and-how-does-it-work/12895)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [December 11, 2024, 4:10am UTC](https://forumautomation.com/t/what-is-a-fieldbus-terminator-and-how-does-it-work/12895 "2024-12-11T04:10:11Z")

</div>

What is a Fieldbus Terminator and How Does it Work? A fieldbus terminator is a necessary component in fieldbus communication systems, acting as a 1 µF capacitor and a 100 Ω resistor in series. Its major function is t…

---

## [What are the components of a burner?](https://forumautomation.com/t/what-are-the-components-of-a-burner/11081)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [April 22, 2023, 8:21am UTC](https://forumautomation.com/t/what-are-the-components-of-a-burner/11081 "2023-04-22T08:21:06Z")

</div>

Main Structure This component makes up the burner’s primary framework and outline. It has a housing and accompanying components, and additional items for a functioning system are mounted on the primary structure. Co…

---

## [What is best way to stop a rotor at a specific location without abruptly stopping it from an obstruction?](https://forumautomation.com/t/what-is-best-way-to-stop-a-rotor-at-a-specific-location-without-abruptly-stopping-it-from-an-obstruction/2411)

<div class="topic-metadata">

**Author:** [@ABC\_DEF](https://forumautomation.com/u/ABC_DEF)\
**Replies:** 0\
**Last updated:** [October 8, 2017, 8:37pm UTC](https://forumautomation.com/t/what-is-best-way-to-stop-a-rotor-at-a-specific-location-without-abruptly-stopping-it-from-an-obstruction/2411 "2017-10-08T20:37:18Z")

</div>

I am reading about many braking methods employed in motors and rotors but none outline the criteria for their general applications. My project involves stopping rotors at specific locations, for example, precisely every …

---

## [Redundancy in Industrial Automation](https://forumautomation.com/t/redundancy-in-industrial-automation/13150)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [April 9, 2025, 12:21pm UTC](https://forumautomation.com/t/redundancy-in-industrial-automation/13150 "2025-04-09T12:21:12Z")

</div>

Redundancy in Industrial Automation In critical industrial processes, redundancy is key. This helps avoid system failures. It ensures that if one component fails, another takes over without disrupting operations. T…

---

## [Safety precautions of Variable frequency drive](https://forumautomation.com/t/safety-precautions-of-variable-frequency-drive/9075)

<div class="topic-metadata">

**Author:** [@VFDdrive](https://forumautomation.com/u/VFDdrive)\
**Replies:** 0\
**Last updated:** [January 14, 2021, 7:30am UTC](https://forumautomation.com/t/safety-precautions-of-variable-frequency-drive/9075 "2021-01-14T07:30:52Z")

</div>

Security Level |Before installation| ◆ Do not install the control system when it is found that water, parts are missing or parts are damaged when unpacking! ◆ If the packing list does not match the actual name, please …

---

## [Trouble in using multiple high speed set reset instruction in Delta DVP SV2 PLC](https://forumautomation.com/t/trouble-in-using-multiple-high-speed-set-reset-instruction-in-delta-dvp-sv2-plc/1528)

<div class="topic-metadata">

**Author:** [@Nitesh\_Dongare](https://forumautomation.com/u/Nitesh_Dongare)\
**Replies:** 0\
**Last updated:** [November 28, 2016, 9:50am UTC](https://forumautomation.com/t/trouble-in-using-multiple-high-speed-set-reset-instruction-in-delta-dvp-sv2-plc/1528 "2016-11-28T09:50:12Z")

</div>

I am using Delta DVP SV2 PLC. I want to set and reset multiple bit on encoder reading for that i m using DHSCS,SHSCR and SHSZ instruction. But after addinng more than 2 DHSZ and 1e istruction DHSR if i add one mor

---

## [Is more steam required for a high-pressure turbine compared to a low-pressure one?](https://forumautomation.com/t/is-more-steam-required-for-a-high-pressure-turbine-compared-to-a-low-pressure-one/12495)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 31, 2024, 5:54pm UTC](https://forumautomation.com/t/is-more-steam-required-for-a-high-pressure-turbine-compared-to-a-low-pressure-one/12495 "2024-08-31T17:54:27Z")

</div>

Is more steam required for a high-pressure turbine compared to a low-pressure one?

---

## [How to configure motorola li4278 with allen bradley micrlogix 1400?](https://forumautomation.com/t/how-to-configure-motorola-li4278-with-allen-bradley-micrlogix-1400/359)

<div class="topic-metadata">

**Author:** [@Abhijeet\_Singh](https://forumautomation.com/u/Abhijeet_Singh)\
**Replies:** 0\
**Last updated:** [March 25, 2015, 10:44am UTC](https://forumautomation.com/t/how-to-configure-motorola-li4278-with-allen-bradley-micrlogix-1400/359 "2015-03-25T10:44:08Z")

</div>

I want to configure my motorola li4278 with allen bradley micrologix 1400 plc. Please help me

---

## [How to set up a parts counter with sensor & Digital Display](https://forumautomation.com/t/how-to-set-up-a-parts-counter-with-sensor-digital-display/3105)

<div class="topic-metadata">

**Author:** [@sarray](https://forumautomation.com/u/sarray)\
**Replies:** 0\
**Last updated:** [February 6, 2018, 8:53pm UTC](https://forumautomation.com/t/how-to-set-up-a-parts-counter-with-sensor-digital-display/3105 "2018-02-06T20:53:50Z")

</div>

Hi all, My Project Scope is below: Count the parts coming out of a therformer Display the data on the screen as such Target : 0000 Actual: 0000 Efficiency: 000 Downtime: 000 Save the data on excel for monthly statist…

---

## [Simple gripper for robotics!](https://forumautomation.com/t/simple-gripper-for-robotics/988)

<div class="topic-metadata">

**Author:** [@13aee](https://forumautomation.com/u/13aee)\
**Replies:** 0\
**Last updated:** [April 15, 2016, 12:23am UTC](https://forumautomation.com/t/simple-gripper-for-robotics/988 "2016-04-15T00:23:25Z")

</div>

Hi everyone Im looking for a simple (pref electric) gripper for collaborative robots (fx KUKA LBR iiwa or UR). I have come across Robotiq and a few others which seem easy to integrate. But I would like some other option…

---

## [Gsm Modem for plcs communications](https://forumautomation.com/t/gsm-modem-for-plcs-communications/1915)

<div class="topic-metadata">

**Author:** [@Yassine\_Baliti](https://forumautomation.com/u/Yassine_Baliti)\
**Replies:** 0\
**Last updated:** [April 14, 2017, 1:45pm UTC](https://forumautomation.com/t/gsm-modem-for-plcs-communications/1915 "2017-04-14T13:45:50Z")

</div>

Hi Everyone I’hope you’re doing all great ,Im working on project called “Gsm modem” the basic idea of project is to enable a communication between Twoo plcs I’ve to use an arduino+Gsm modem ,so i was wondering if someone…

---

## [IEC61499 for electrical network automation?](https://forumautomation.com/t/iec61499-for-electrical-network-automation/3211)

<div class="topic-metadata">

**Author:** [@jeyak1d](https://forumautomation.com/u/jeyak1d)\
**Replies:** 0\
**Last updated:** [February 28, 2018, 11:11am UTC](https://forumautomation.com/t/iec61499-for-electrical-network-automation/3211 "2018-02-28T11:11:19Z")

</div>

Hi all, Just joined this community, specifically to get expert views on automation for electrical distribution networks. First of all, automation for distribution networks consists of logic schemes which process informa…

---

## [Interface dip tape](https://forumautomation.com/t/interface-dip-tape/59)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:42pm UTC](https://forumautomation.com/t/interface-dip-tape/59 "2014-10-02T17:42:40Z")

</div>

Interface dip tape is an instrument used for measuring the total and the interface liquid level in vessel. For example: It is used in oil storage tanks to measure the total liquid level and water level.

---

## [How to investigate Drill life?](https://forumautomation.com/t/how-to-investigate-drill-life/6226)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 8, 2019, 7:34pm UTC](https://forumautomation.com/t/how-to-investigate-drill-life/6226 "2019-04-08T19:34:23Z")

</div>

Drilling is one of the most popular holes in production methods. Both in mass production and in small batch production, twist drills are the most common tools used. They are increasingly made from cemented carbides, but …

---

## [What are the reasons to prefer pneumatic systems over hydraulic systems and electrical systems?](https://forumautomation.com/t/what-are-the-reasons-to-prefer-pneumatic-systems-over-hydraulic-systems-and-electrical-systems/12700)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 19, 2024, 7:16am UTC](https://forumautomation.com/t/what-are-the-reasons-to-prefer-pneumatic-systems-over-hydraulic-systems-and-electrical-systems/12700 "2024-10-19T07:16:07Z")

</div>

What are the reasons to prefer pneumatic systems over hydraulic systems and electrical systems?

---

## [Vertical carousel automation](https://forumautomation.com/t/vertical-carousel-automation/5936)

<div class="topic-metadata">

**Author:** [@Theo12](https://forumautomation.com/u/Theo12)\
**Replies:** 0\
**Last updated:** [February 15, 2019, 12:36pm UTC](https://forumautomation.com/t/vertical-carousel-automation/5936 "2019-02-15T12:36:03Z")

</div>

Hi guys, this is my first post in this (or any other forum) ever, i hope anyone can help me For my graduation internship i have to redesign the software of a vertical carousel. The company had a vertical carousel that …

---

## [What is the Range of WirelessHART?](https://forumautomation.com/t/what-is-the-range-of-wirelesshart/12898)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [December 18, 2024, 2:08am UTC](https://forumautomation.com/t/what-is-the-range-of-wirelesshart/12898 "2024-12-18T02:08:02Z")

</div>

What is the Range of WirelessHART?

---

## ["GP-Pro EX Simulation Works, but HMI Screen Not Displaying After Sending Project (GP4601TADV Model)](https://forumautomation.com/t/gp-pro-ex-simulation-works-but-hmi-screen-not-displaying-after-sending-project-gp4601tadv-model/12586)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 23, 2024, 4:47am UTC](https://forumautomation.com/t/gp-pro-ex-simulation-works-but-hmi-screen-not-displaying-after-sending-project-gp4601tadv-model/12586 "2024-09-23T04:47:04Z")

</div>

GP-Pro EX Simulation Works, but HMI Screen Not Displaying After Sending Project (GP4601TADV Model)

---

## [What is the Function of a Smart Regulator in a PID Controller?](https://forumautomation.com/t/what-is-the-function-of-a-smart-regulator-in-a-pid-controller/12849)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 22, 2024, 11:07am UTC](https://forumautomation.com/t/what-is-the-function-of-a-smart-regulator-in-a-pid-controller/12849 "2024-11-22T11:07:25Z")

</div>

What is the Function of a Smart Regulator in a PID Controller?

---

## [Schneider Powerlogic g3200 CID ICD File creation](https://forumautomation.com/t/schneider-powerlogic-g3200-cid-icd-file-creation/4639)

<div class="topic-metadata">

**Author:** [@ST3000](https://forumautomation.com/u/ST3000)\
**Replies:** 0\
**Last updated:** [September 13, 2018, 8:16am UTC](https://forumautomation.com/t/schneider-powerlogic-g3200-cid-icd-file-creation/4639 "2018-09-13T08:16:37Z")

</div>

CID and ICD file creation. Hi, I have a system that is using a Schneider PowerLogic G3200 to convert Allen Bradley MicroLogix 1100 Modbus to IEC 61850, but I am lost when it comes to creating an ICD / CID file. Does an…

---

## [Android Modbus TCP application](https://forumautomation.com/t/android-modbus-tcp-application/3930)

<div class="topic-metadata">

**Author:** [@Yaacov](https://forumautomation.com/u/Yaacov)\
**Replies:** 0\
**Last updated:** [June 25, 2018, 9:46am UTC](https://forumautomation.com/t/android-modbus-tcp-application/3930 "2018-06-25T09:46:57Z")

</div>

Hi to my industrial control colleagues, I have developed a small android application that enables the production of Modbus TCP client & TCP server communication. enables testing communication to other modbus devices as …

---

## [Malfunction Of Zigbee](https://forumautomation.com/t/malfunction-of-zigbee/2474)

<div class="topic-metadata">

**Author:** [@MZohaib92](https://forumautomation.com/u/MZohaib92)\
**Replies:** 0\
**Last updated:** [October 18, 2017, 3:36pm UTC](https://forumautomation.com/t/malfunction-of-zigbee/2474 "2017-10-18T15:36:41Z")

</div>

Hello, I have made a project using zigbees communication through RS-485(2-wires), three different master zigbees of different network mounted on single box. The project have completed but suddenly two days ago communicat…

---

## [What is FT and HA in Virtualization?](https://forumautomation.com/t/what-is-ft-and-ha-in-virtualization/11024)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [April 1, 2023, 12:34pm UTC](https://forumautomation.com/t/what-is-ft-and-ha-in-virtualization/11024 "2023-04-01T12:34:31Z")

</div>

What is meant by Virtualization? Virtualization enables a single computer to perform the duties of several computers by sharing the resources of a single hardware across various settings. What is meant by FT in virtu…

---

## [Star Delta Starter Explained by Solving a real problem](https://forumautomation.com/t/star-delta-starter-explained-by-solving-a-real-problem/8712)

<div class="topic-metadata">

**Author:** [@Mazen\_Mostafa](https://forumautomation.com/u/Mazen_Mostafa)\
**Replies:** 0\
**Last updated:** [October 23, 2020, 12:35pm UTC](https://forumautomation.com/t/star-delta-starter-explained-by-solving-a-real-problem/8712 "2020-10-23T12:35:31Z")

</div>

I found this video useful that explains star delta starters easily and in a creative way. Here is what you will learn from the video: A problem in 3 phase induction motor in conveyor belt system&will learn…

[Previous page](https://forumautomation.com/c/industrial-automation/7.md?page=6&per_page=50)

[Next page](https://forumautomation.com/c/industrial-automation/7.md?page=8&per_page=50)
