# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=31

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 32

---

## [Hydraulic System Pressure Switch Shows Incorrect Pressure Signal During Operation](https://forumautomation.com/t/hydraulic-system-pressure-switch-shows-incorrect-pressure-signal-during-operation/14331)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 21, 2026, 1:41pm UTC](https://forumautomation.com/t/hydraulic-system-pressure-switch-shows-incorrect-pressure-signal-during-operation/14331 "2026-08-21T13:41:52Z")

</div>

Hydraulic System Pressure Switch Shows Incorrect Pressure Signal During Operation A pressure switch on the hydraulic system will sound an alarm and turn the hydraulic pump off if pressure falls below the setpoint. Un…

---

## [Troubleshooting Ultrasonic Level Gauges in Measurement](https://forumautomation.com/t/troubleshooting-ultrasonic-level-gauges-in-measurement/13666)

<div class="topic-metadata">

**Author:** [@ARTang](https://forumautomation.com/u/ARTang)\
**Replies:** 0\
**Last updated:** [October 31, 2025, 6:01am UTC](https://forumautomation.com/t/troubleshooting-ultrasonic-level-gauges-in-measurement/13666 "2025-10-31T06:01:40Z")

</div>

Ultrasonic level gauges, as non-contact level measurement instruments, are known for their high measurement accuracy, simple installation, and minimal maintenance requirements. They are commonly used to measure the liqui…

---

## [Radar Level Transmitter Gives False Level Even Though the Actual Tank Level Is Stable](https://forumautomation.com/t/radar-level-transmitter-gives-false-level-even-though-the-actual-tank-level-is-stable/14353)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 5, 2026, 3:51am UTC](https://forumautomation.com/t/radar-level-transmitter-gives-false-level-even-though-the-actual-tank-level-is-stable/14353 "2026-09-05T03:51:11Z")

</div>

Radar Level Transmitter Gives False Level Even Though the Actual Tank Level Is Stable A radar level transmitter installed on a process vessel shows a level of 78 percent while the actual process level, confirmed through …

---

## [What is a loop folder in instrumentation?](https://forumautomation.com/t/what-is-a-loop-folder-in-instrumentation/14420)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 16, 2026, 10:58am UTC](https://forumautomation.com/t/what-is-a-loop-folder-in-instrumentation/14420 "2026-09-16T10:58:43Z")

</div>

What is a loop folder in instrumentation?

---

## [What is dust group IIIA, IIIB, IIIC?](https://forumautomation.com/t/what-is-dust-group-iiia-iiib-iiic/14449)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 2, 2026, 9:17am UTC](https://forumautomation.com/t/what-is-dust-group-iiia-iiib-iiic/14449 "2026-10-02T09:17:11Z")

</div>

What is dust group IIIA, IIIB, IIIC?

---

## [ESD Signal Does Not Initiate Shutdown During a Process Trip](https://forumautomation.com/t/esd-signal-does-not-initiate-shutdown-during-a-process-trip/14332)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 21, 2026, 1:41pm UTC](https://forumautomation.com/t/esd-signal-does-not-initiate-shutdown-during-a-process-trip/14332 "2026-08-21T13:41:19Z")

</div>

ESD Signal Does Not Initiate Shutdown During a Process Trip During the plant operation, a crucial process parameter exceeds its configured trip limit and the related ESD signal is expected to activate an emergency sh…

---

## [What are the common causes of control valve failure?](https://forumautomation.com/t/what-are-the-common-causes-of-control-valve-failure/14487)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 22, 2026, 4:52pm UTC](https://forumautomation.com/t/what-are-the-common-causes-of-control-valve-failure/14487 "2026-10-22T16:52:40Z")

</div>

What are the common causes of control valve failure?

---

## [What are control loops in a P&ID?](https://forumautomation.com/t/what-are-control-loops-in-a-p-id/14419)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 16, 2026, 10:55am UTC](https://forumautomation.com/t/what-are-control-loops-in-a-p-id/14419 "2026-09-16T10:55:34Z")

</div>

What are control loops in a P&ID?

---

## [Capacitance Level Transmitter Shows Unstable Level Despite a Constant Process Level](https://forumautomation.com/t/capacitance-level-transmitter-shows-unstable-level-despite-a-constant-process-level/14333)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 21, 2026, 1:40pm UTC](https://forumautomation.com/t/capacitance-level-transmitter-shows-unstable-level-despite-a-constant-process-level/14333 "2026-08-21T13:40:21Z")

</div>

Capacitance Level Transmitter Shows Unstable Level Despite a Constant Process Level A capacitance level transmitter is mounted on the process vessel to continually measure the liquid level. In normal operation the rea…

---

## [How much control valve leakage is acceptable?](https://forumautomation.com/t/how-much-control-valve-leakage-is-acceptable/14446)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 25, 2026, 1:14pm UTC](https://forumautomation.com/t/how-much-control-valve-leakage-is-acceptable/14446 "2026-09-25T13:14:52Z")

</div>

How much control valve leakage is acceptable?

---

## [Online pH Analyzer Shows 4.3 While Laboratory Measurement Shows 6.9](https://forumautomation.com/t/online-ph-analyzer-shows-4-3-while-laboratory-measurement-shows-6-9/14319)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 13, 2026, 4:25pm UTC](https://forumautomation.com/t/online-ph-analyzer-shows-4-3-while-laboratory-measurement-shows-6-9/14319 "2026-08-13T16:25:45Z")

</div>

Online pH Analyzer Shows 4.3 While Laboratory Measurement Shows 6.9 A wastewater tank normally operates at pH 7.0. The online pH analyzer suddenly indicates 4.3, while laboratory testing shows 6.9. The transmitter output…

---

## [What is gas group IIA, IIB, IIC?](https://forumautomation.com/t/what-is-gas-group-iia-iib-iic/14448)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 25, 2026, 1:12pm UTC](https://forumautomation.com/t/what-is-gas-group-iia-iib-iic/14448 "2026-09-25T13:12:35Z")

</div>

What is gas group IIA, IIB, IIC?

---

## [Control Valve Is Not Reaching the Commanded Position. What Should Be Checked?](https://forumautomation.com/t/control-valve-is-not-reaching-the-commanded-position-what-should-be-checked/14401)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 13, 2026, 10:11am UTC](https://forumautomation.com/t/control-valve-is-not-reaching-the-commanded-position-what-should-be-checked/14401 "2026-09-13T10:11:43Z")

</div>

Control Valve Is Not Reaching the Commanded Position. What Should Be Checked? The control system commands the pneumatic control valve to open 80 percent, but the valve opens only about 40 percent. The positioner shows…

---

## [How to select control valve characteristics?](https://forumautomation.com/t/how-to-select-control-valve-characteristics/14281)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 30, 2026, 4:38am UTC](https://forumautomation.com/t/how-to-select-control-valve-characteristics/14281 "2026-07-30T04:38:27Z")

</div>

How to select control valve characteristics?

---

## [What is hysteresis in control valves?](https://forumautomation.com/t/what-is-hysteresis-in-control-valves/14486)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 30, 2026, 3:52pm UTC](https://forumautomation.com/t/what-is-hysteresis-in-control-valves/14486 "2026-10-30T15:52:14Z")

</div>

\*\*What is hysteresis in control valves?\*\*

---

## [What are the different types of intrinsically safe barriers?](https://forumautomation.com/t/what-are-the-different-types-of-intrinsically-safe-barriers/14489)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 22, 2026, 4:54pm UTC](https://forumautomation.com/t/what-are-the-different-types-of-intrinsically-safe-barriers/14489 "2026-10-22T16:54:03Z")

</div>

What are the different types of intrinsically safe barriers?

---

## [What are the requirements for intrinsically safe?](https://forumautomation.com/t/what-are-the-requirements-for-intrinsically-safe/14490)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 15, 2026, 4:03am UTC](https://forumautomation.com/t/what-are-the-requirements-for-intrinsically-safe/14490 "2026-10-15T04:03:52Z")

</div>

What are the requirements for intrinsically safe?

---

## [What is Cage-guided Globe control Valve?](https://forumautomation.com/t/what-is-cage-guided-globe-control-valve/14466)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 2, 2026, 9:20am UTC](https://forumautomation.com/t/what-is-cage-guided-globe-control-valve/14466 "2026-10-02T09:20:18Z")

</div>

What is Cage-guided Globe control Valve ?

---

## [p500 endress hauser strap on flow meter](https://forumautomation.com/t/p500-endress-hauser-strap-on-flow-meter/14172)

<div class="topic-metadata">

**Author:** [@Rvilla](https://forumautomation.com/u/Rvilla)\
**Replies:** 0\
**Last updated:** [June 6, 2026, 5:52am UTC](https://forumautomation.com/t/p500-endress-hauser-strap-on-flow-meter/14172 "2026-06-06T05:52:10Z")

</div>

Im working on an Endress Hauser strap on ultrasonic flow meter Prosonic 500 .Its set up in a 8 inch cement painted pipe. I get 0 dbs or very low signal, when the pipe is empty and its causing an alarm code f104. It…

---

## [Why does a control valve fail even after calibration?](https://forumautomation.com/t/why-does-a-control-valve-fail-even-after-calibration/14175)

<div class="topic-metadata">

**Author:** [@autoviks](https://forumautomation.com/u/autoviks)\
**Replies:** 0\
**Last updated:** [June 6, 2026, 5:53am UTC](https://forumautomation.com/t/why-does-a-control-valve-fail-even-after-calibration/14175 "2026-06-06T05:53:36Z")

</div>

Hi all, I’ve come across situations where a control valve still doesn’t perform properly even after proper calibration. In some cases, the valve shows issues like unstable flow, delayed response, or incorrect positioni…

---

## [What is the difference between fat and fwt?](https://forumautomation.com/t/what-is-the-difference-between-fat-and-fwt/14559)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 30, 2026, 3:48pm UTC](https://forumautomation.com/t/what-is-the-difference-between-fat-and-fwt/14559 "2026-10-30T15:48:03Z")

</div>

What is the difference between fat and fwt?

---

## [Magnetic Flowmeter Showing Zero Flow Despite Pump Running](https://forumautomation.com/t/magnetic-flowmeter-showing-zero-flow-despite-pump-running/14599)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 12, 2026, 4:41pm UTC](https://forumautomation.com/t/magnetic-flowmeter-showing-zero-flow-despite-pump-running/14599 "2026-11-12T16:41:03Z")

</div>

Magnetic Flowmeter Showing Zero Flow Despite Pump Running \*\*The pump is running, the pipeline is completely filled and the downstream valve is open, but the electromagnetic flowmeter displays zero flow. What should we i…

---

## [Pressure Transmitter Showing 20 mA Even When Process Pressure Is Zero: What Could Be the Cause?](https://forumautomation.com/t/pressure-transmitter-showing-20-ma-even-when-process-pressure-is-zero-what-could-be-the-cause/14598)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 12, 2026, 4:39pm UTC](https://forumautomation.com/t/pressure-transmitter-showing-20-ma-even-when-process-pressure-is-zero-what-could-be-the-cause/14598 "2026-11-12T16:39:48Z")

</div>

Pressure Transmitter Showing 20 mA Even When Process Pressure Is Zero: What Could Be the Cause? \*\*A pressure transmitter indicates 20 mA continuously, even after isolating the process connection and confirming zero pres…

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=30&per_page=50)
