# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=3

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 4

---

## [Design of Intrinsically safe system](https://forumautomation.com/t/design-of-intrinsically-safe-system/7270)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 12, 2019, 6:57pm UTC](https://forumautomation.com/t/design-of-intrinsically-safe-system/7270 "2019-10-12T18:57:54Z")

</div>

In order to prevent an explosion from electrical devices in a hazardous location, intrinsic safety is been employed in a preferred zone. The safety technique is based on the proper design of the system and intrinsic prot…

---

## [Why Gas detectors shows negative reading?](https://forumautomation.com/t/why-gas-detectors-shows-negative-reading/5601)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [December 29, 2018, 11:13am UTC](https://forumautomation.com/t/why-gas-detectors-shows-negative-reading/5601 "2018-12-29T11:13:39Z")

</div>

All electrochemical or catalytic gas sensors may show both positive and negative drift due to environmental factors such as changes in temperature and humidity. However, these are not the most common causes of negativ…

---

## [How to decide control valve body material ? (WCC or WBB)](https://forumautomation.com/t/how-to-decide-control-valve-body-material-wcc-or-wbb/1324)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [September 4, 2016, 6:52am UTC](https://forumautomation.com/t/how-to-decide-control-valve-body-material-wcc-or-wbb/1324 "2016-09-04T06:52:46Z")

</div>

The different of WCA,WCB and WCC is made of different steel grade. C is better than B, B better than A. all there had different temperature and strength rating. As for valve body selection (according to ISA) “Control va…

---

## [Preventive maintenance for Air compressor](https://forumautomation.com/t/preventive-maintenance-for-air-compressor/3944)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 26, 2018, 6:16pm UTC](https://forumautomation.com/t/preventive-maintenance-for-air-compressor/3944 "2018-06-26T18:16:49Z")

</div>

Air compressor is a device which stores air in high potential energy. The compressor absorbs air from surrounding atmosphere and compresses the air into a fixed volume using different mechanisms, such as reciprocating…

---

## [Calibration of instruments](https://forumautomation.com/t/calibration-of-instruments/5574)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [December 26, 2018, 2:29am UTC](https://forumautomation.com/t/calibration-of-instruments/5574 "2018-12-26T02:29:48Z")

</div>

Calibration of the Instruments Calibration of the measuring instrument is the process in which the readings obtained from the instrument are compared with the sub-standards in the laboratory at several points along th…

---

## [Pre-Commissioning Checklist download](https://forumautomation.com/t/pre-commissioning-checklist-download/6356)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [May 8, 2019, 6:25pm UTC](https://forumautomation.com/t/pre-commissioning-checklist-download/6356 "2019-05-08T18:25:35Z")

</div>

Commissioning is a method used to verify that a plant has been built, procured, manufactured, assembled, tested and ready for service in compliance with design sketches and requirements. Finishing the pre-commissioning …

---

## [Why use signal converter pt100](https://forumautomation.com/t/why-use-signal-converter-pt100/3101)

<div class="topic-metadata">

**Author:** [@huuthanh0991](https://forumautomation.com/u/huuthanh0991)\
**Replies:** 0\
**Last updated:** [February 6, 2018, 4:03pm UTC](https://forumautomation.com/t/why-use-signal-converter-pt100/3101 "2018-02-06T16:03:14Z")

</div>

Why use the pt100 signal converter ? What is Pt100 ? This will be answered in this article. If you have any problems with the registration process or your post, please contact us… Thank you ! What is Pt100? Pt100 is a…

---

## [Advantages and disadvantages of an RTD over a thermocouple](https://forumautomation.com/t/advantages-and-disadvantages-of-an-rtd-over-a-thermocouple/90)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:29pm UTC](https://forumautomation.com/t/advantages-and-disadvantages-of-an-rtd-over-a-thermocouple/90 "2014-10-02T18:29:22Z")

</div>

RTDs are accurate at a lower range of temperature measurement such as -200 Deg C to +200 Deg C. RTDs are expensive compared to Thermocouples, also there are limitations in measuring at the higher range of temperature

---

## [What is valve lapping? Procedure for lapping](https://forumautomation.com/t/what-is-valve-lapping-procedure-for-lapping/5752)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 18, 2019, 12:09pm UTC](https://forumautomation.com/t/what-is-valve-lapping-procedure-for-lapping/5752 "2019-01-18T12:09:13Z")

</div>

Lapping is the process of cleaning the control valve for maintenance purposes. The lapping is done with compounds that has roughness, and used to clean valve disc and nozzle seats etc., Every seat and disc from a rel…

---

## [What is hydro-pneumatic system and how does it work?](https://forumautomation.com/t/what-is-hydro-pneumatic-system-and-how-does-it-work/10395)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [May 9, 2022, 4:48am UTC](https://forumautomation.com/t/what-is-hydro-pneumatic-system-and-how-does-it-work/10395 "2022-05-09T04:48:44Z")

</div>

What is a pneumatic system? A pneumatic system is a compressed air-based power transfer system. A system of tanks, pipelines, and valves usually connects a centrally positioned compressor to cylinders, rotary actuators,…

---

## [Control valve symbols in P&id](https://forumautomation.com/t/control-valve-symbols-in-p-id/10897)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [February 22, 2023, 6:02am UTC](https://forumautomation.com/t/control-valve-symbols-in-p-id/10897 "2023-02-22T06:02:44Z")

</div>

Control valves are used in process control systems to regulate the flow of fluid, gas or steam. These symbols are used in process flow diagrams, P&IDs (piping and instrumentation diagrams), and other engineering draw…

---

## [What is Blowdown Valve?](https://forumautomation.com/t/what-is-blowdown-valve/4521)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 1, 2018, 11:23am UTC](https://forumautomation.com/t/what-is-blowdown-valve/4521 "2018-09-01T11:23:49Z")

</div>

Blowdown Valve Blowdown valves are commonly used in boilers in order to drain dissolved solids from the boiler water. These valves are fitted on the drain lines of the boilers. One or multiple blowdown valves are used in…

---

## [What is Valve manifold? Explain about 3 way and 5 way valve manifold](https://forumautomation.com/t/what-is-valve-manifold-explain-about-3-way-and-5-way-valve-manifold/2718)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 24, 2017, 9:19pm UTC](https://forumautomation.com/t/what-is-valve-manifold-explain-about-3-way-and-5-way-valve-manifold/2718 "2017-11-24T21:19:48Z")

</div>

The valves manifolds are devices that are associated with the DP transmitter, The device isolates the DP transmitter from the process, for maintenance and calibration process. There are 3 valve manifold and 5 valve mani…

---

## [Pressure transmitter selection Checklist](https://forumautomation.com/t/pressure-transmitter-selection-checklist/6271)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 19, 2019, 6:47pm UTC](https://forumautomation.com/t/pressure-transmitter-selection-checklist/6271 "2019-04-19T18:47:26Z")

</div>

The pressure transmitter can be used wherever there is a chamber or pipeline. It has the function of sensing and converting pressure into a proportional electrical output signal transmitted to a monitoring or control sys…

---

## [Types of Bourdon tubes](https://forumautomation.com/t/types-of-bourdon-tubes/50)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:28pm UTC](https://forumautomation.com/t/types-of-bourdon-tubes/50 "2014-10-02T17:28:55Z")

</div>

The following are the commonly used Bourdon tubes used in industries: Spiral –Low range 10 –100kpa C type –Medium range 100 – 5000kpa Helical – High range 5000 – 20000kpa

---

## [Application of Digital Valve controller](https://forumautomation.com/t/application-of-digital-valve-controller/6006)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 1, 2019, 6:04pm UTC](https://forumautomation.com/t/application-of-digital-valve-controller/6006 "2019-03-01T18:04:29Z")

</div>

What is the digital valve controller? The Digital Valve Controller is smart controller and attached to the valve actuator that controls and monitors the operation of the valve. The DVC can operate in protocol 4 - 20mA, H…

---

## [Calibration of Pressure gauges with dead weight tester](https://forumautomation.com/t/calibration-of-pressure-gauges-with-dead-weight-tester/5081)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 2, 2018, 12:29am UTC](https://forumautomation.com/t/calibration-of-pressure-gauges-with-dead-weight-tester/5081 "2018-11-02T00:29:07Z")

</div>

Pressure gauge Pressure gauges are Instruments that measure and display pressure. Pressure ,applied force by a fluid (liquid or gas) on a surface, is measured as force per unit of surface area Classification of Pressure…

---

## [What is P&ID ? How to read a P&ID?](https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 1\
**Last updated:** [November 28, 2015, 5:56am UTC](https://forumautomation.com/t/what-is-p-id-how-to-read-a-p-id/623 "2015-11-28T05:56:59Z")

</div>

What is P&ID? It stands for Piping and Instrumentation diagram. It gives the over all idea about the process. Why to use P&ID? To describe over all plant and instrumentation. It shows the flows in a plant and the co…

---

## [What is the difference between ON delay and OFF delay timer](https://forumautomation.com/t/what-is-the-difference-between-on-delay-and-off-delay-timer/10034)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 4, 2021, 3:16am UTC](https://forumautomation.com/t/what-is-the-difference-between-on-delay-and-off-delay-timer/10034 "2021-12-04T03:16:52Z")

</div>

Explain the difference between ON delay and OFF delay timer

---

## [How to Connect Diaphragm seal for DPT transmitter?](https://forumautomation.com/t/how-to-connect-diaphragm-seal-for-dpt-transmitter/6896)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [September 20, 2019, 6:58pm UTC](https://forumautomation.com/t/how-to-connect-diaphragm-seal-for-dpt-transmitter/6896 "2019-09-20T18:58:11Z")

</div>

Process connection of DPT with diaphragm seal To determine the liquid level in a tank, the differential pressure is assessed across a tank level. A diaphragm seal is used to directly measure the pressure across the le…

---

## [Types of calibration, Static and dynamic](https://forumautomation.com/t/types-of-calibration-static-and-dynamic/3437)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 17, 2018, 6:25pm UTC](https://forumautomation.com/t/types-of-calibration-static-and-dynamic/3437 "2018-04-17T18:25:44Z")

</div>

What is calibration? Calibration in measurement is the comparison of measurement values delivered by a device under test with those of a calibration standard of known accuracy. Static and dynamic are two classifications …

---

## [How to calibrate Differential pressure gauge (DPT) level transmitter at field?](https://forumautomation.com/t/how-to-calibrate-differential-pressure-gauge-dpt-level-transmitter-at-field/6518)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 8, 2019, 6:11pm UTC](https://forumautomation.com/t/how-to-calibrate-differential-pressure-gauge-dpt-level-transmitter-at-field/6518 "2019-06-08T18:11:02Z")

</div>

Equipment required: Datasheet, Pressure calibrator, Multimeter, Hart communicator Procedure of DP Level Transmitter Calibration at field: Man placed the computer in the control circuit manual mode and placed…

---

## [What are burners used in boilers? types of burners](https://forumautomation.com/t/what-are-burners-used-in-boilers-types-of-burners/5674)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 8, 2019, 3:08pm UTC](https://forumautomation.com/t/what-are-burners-used-in-boilers-types-of-burners/5674 "2019-01-08T15:08:19Z")

</div>

What are burners? Most boilers get their heat from the hot water or steam from the combustion of the fuel that a burner requires. The burners are to control the fuel and air mixture so that the combustion occurs smoo…

---

## [Free Online instrumentation Courses](https://forumautomation.com/t/free-online-instrumentation-courses/4783)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 28, 2018, 1:10pm UTC](https://forumautomation.com/t/free-online-instrumentation-courses/4783 "2018-09-28T13:10:50Z")

</div>

Knowledge in process industry can acquire from the subject Instrumentation. Instrumentation covers almost all section in the process such as sensing, controlling, recording and indication physical variables and automatio…

---

## [Temperature sensor location considerations](https://forumautomation.com/t/temperature-sensor-location-considerations/6239)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 11, 2019, 5:38pm UTC](https://forumautomation.com/t/temperature-sensor-location-considerations/6239 "2019-04-11T17:38:55Z")

</div>

Careful consideration must be given to the location of temperature sensing probes in order to obtain accurate temperature measurement. Large measurement errors in service may be due to the wrong choice of instrument, but…

---

## [What is Vacuum box testing?](https://forumautomation.com/t/what-is-vacuum-box-testing/7203)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 27, 2019, 8:42am UTC](https://forumautomation.com/t/what-is-vacuum-box-testing/7203 "2019-09-27T08:42:30Z")

</div>

What is vacuum box testing? Vacuum box testing is a very popular leak-testing technique that is widely used to test various objects against defects, flaws, leaks, or other imperfections, being an efficient and effective…

---

## [What do you mean by a flow meter and a flow transmitter?](https://forumautomation.com/t/what-do-you-mean-by-a-flow-meter-and-a-flow-transmitter/4538)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 3, 2018, 5:11pm UTC](https://forumautomation.com/t/what-do-you-mean-by-a-flow-meter-and-a-flow-transmitter/4538 "2018-09-03T17:11:47Z")

</div>

What do you mean by a flow meter and a flow transmitter? Most diverse substances like liquid, gases, steam are transported and distributed in piping systems in every single day. The fluid going through the pipes often ha…

---

## [What is FAT test? and What is IFAT test?](https://forumautomation.com/t/what-is-fat-test-and-what-is-ifat-test/7351)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 29, 2019, 6:02pm UTC](https://forumautomation.com/t/what-is-fat-test-and-what-is-ifat-test/7351 "2019-10-29T18:02:00Z")

</div>

What is FAT test? Many manufacturers do FAT (Factory Acceptance Test) while adding, modifying or upgrading a system. A FAT requires a standardized device testing procedure and is conducted where the final installatio…

---

## [How to measure liquid- liquid interface level?](https://forumautomation.com/t/how-to-measure-liquid-liquid-interface-level/2865)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [July 9, 2019, 8:49pm UTC](https://forumautomation.com/t/how-to-measure-liquid-liquid-interface-level/2865 "2019-07-09T20:49:46Z")

</div>

Sometimes two different liquids having different density have to fill in a tank for mixing. Therefore it will be two levels that have to be measured one above another. Which is important the ratio of the liquids in the v…

---

## [Gas analyzer spectroscopy - Working Principle and Types](https://forumautomation.com/t/gas-analyzer-spectroscopy-working-principle-and-types/2900)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [December 30, 2017, 5:30pm UTC](https://forumautomation.com/t/gas-analyzer-spectroscopy-working-principle-and-types/2900 "2017-12-30T17:30:09Z")

</div>

Working principle: Gas analyzers work on the principle of absorption of light by the gas under test. Absorption analyzers need only shine a beam of light through an unheated sample chamber, then measure how much of spe…

---

## [What are the equipment required for the maintenance,repair and calibration of pressure instruments?](https://forumautomation.com/t/what-are-the-equipment-required-for-the-maintenance-repair-and-calibration-of-pressure-instruments/1615)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 2, 2017, 5:52am UTC](https://forumautomation.com/t/what-are-the-equipment-required-for-the-maintenance-repair-and-calibration-of-pressure-instruments/1615 "2017-01-02T05:52:33Z")

</div>

Proper equipment is required for the maintenance,troubleshooting,repair and calibration of pressure instruments. 1.Pressure source - Deadweight tester or a portable regulated air supply. 2.A very accurate pressure gaug…

---

## [Function of an orifice plate in flow measurement](https://forumautomation.com/t/function-of-an-orifice-plate-in-flow-measurement/70)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:00pm UTC](https://forumautomation.com/t/function-of-an-orifice-plate-in-flow-measurement/70 "2014-10-02T18:00:29Z")

</div>

An orifice plate creates a differential pressure in a flow line. The DP created is use for measuring the flow through the process line ‘d’ (orifice diameter) id permitted in a pipeline 0.25 D\<d\<0.75 D ‘d’ – the Ori…

---

## [What is a servo valve and how does it work](https://forumautomation.com/t/what-is-a-servo-valve-and-how-does-it-work/8339)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [May 29, 2020, 6:26am UTC](https://forumautomation.com/t/what-is-a-servo-valve-and-how-does-it-work/8339 "2020-05-29T06:26:06Z")

</div>

What is a servo valve and what is the function of a servo valve A servo valve can be considered as a directional control valve, basically, it is a pneumatic or hydraulic actuator that can connect more ways through which…

---

## [Manometer basics & Micromanometer](https://forumautomation.com/t/manometer-basics-micromanometer/3035)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 26, 2018, 3:18pm UTC](https://forumautomation.com/t/manometer-basics-micromanometer/3035 "2018-01-26T15:18:08Z")

</div>

Manometer: A manometer is a continuous pressure measuring instrument. The manometer measures the pressure by balancing against the gravitational force of the liquid head. Pressure applied to a liquid column of the mano…

---

## [Process control characteristics](https://forumautomation.com/t/process-control-characteristics/3302)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 17, 2018, 6:47pm UTC](https://forumautomation.com/t/process-control-characteristics/3302 "2018-03-17T18:47:58Z")

</div>

What is process control? A process control is changing the process variable to the desired quantity according to the measured feedback variable from the process. A Process control system always aim to achieve a process…

---

## [What is instrument calibration and why instrument calibration is required?](https://forumautomation.com/t/what-is-instrument-calibration-and-why-instrument-calibration-is-required/1300)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [August 31, 2016, 4:23am UTC](https://forumautomation.com/t/what-is-instrument-calibration-and-why-instrument-calibration-is-required/1300 "2016-08-31T04:23:07Z")

</div>

Instrument Calibration Calibration is performed to verify sensor/instrument performance. Calibration is the process used to insure that a sensor/instrument maintains specification over time and changing ambient conditi…

---

## [What is Temperature Sensor and its Working Principle?](https://forumautomation.com/t/what-is-temperature-sensor-and-its-working-principle/9947)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 1\
**Last updated:** [October 30, 2021, 2:11am UTC](https://forumautomation.com/t/what-is-temperature-sensor-and-its-working-principle/9947 "2021-10-30T02:11:25Z")

</div>

What is Temperature Sensor? A temperature sensor is a device that detects whether a substance is hot or cold. The device could be a thermocouple or a resistance temperature detector, which gives temperature measurement …

---

## [How to protect control valve in case of fire?](https://forumautomation.com/t/how-to-protect-control-valve-in-case-of-fire/6471)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [May 30, 2019, 6:03pm UTC](https://forumautomation.com/t/how-to-protect-control-valve-in-case-of-fire/6471 "2019-05-30T18:03:16Z")

</div>

What happens when the valve caught fire?﻿ When a fire breaks out, the pneumatic actuator’s fail-safe position will be adversely affected. The high temperatures result in the springs losing their strength. As the tem…

---

## [What is Pt 100 RTD?](https://forumautomation.com/t/what-is-pt-100-rtd/4208)

<div class="topic-metadata">

**Author:** [@areejsidhik](https://forumautomation.com/u/areejsidhik)\
**Replies:** 0\
**Last updated:** [July 24, 2018, 2:45pm UTC](https://forumautomation.com/t/what-is-pt-100-rtd/4208 "2018-07-24T14:45:45Z")

</div>

.Platinum resistance thermometers (PRT) offer excellent accuracy over a wide temperature range (-200 to +850 ° C). Standard sensors are available from many manufacturers with various precision specifications and numerous…

---

## [Electromagnetic flow transmitter Troubleshooting](https://forumautomation.com/t/electromagnetic-flow-transmitter-troubleshooting/1959)

<div class="topic-metadata">

**Author:** [@shah](https://forumautomation.com/u/shah)\
**Replies:** 5\
**Last updated:** [December 29, 2025, 9:20am UTC](https://forumautomation.com/t/electromagnetic-flow-transmitter-troubleshooting/1959 "2025-12-29T09:20:35Z")

</div>

I have krohne IFC 050 magnetic flow convertor in service which measure flow of sodium sulphite. IFC 050 Convertor does not show flow measurement in his display when pipe have flow. No scaling problem. I clean electrode b…

---

## [Vortex flow meter](https://forumautomation.com/t/vortex-flow-meter/3041)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [December 29, 2025, 9:04am UTC](https://forumautomation.com/t/vortex-flow-meter/3041 "2025-12-29T09:04:49Z")

</div>

Vortex flowmeters are used to measure pressure in the pipeline, creating vortices in the flow channel using a stationary object (Bluff body). The vortex flowmeters are used for measuring gases and liquids in pipeline …

---

## [Flow Measurement : Magnetic Flow meters -Application Advantages and Disadvantages Installation](https://forumautomation.com/t/flow-measurement-magnetic-flow-meters-application-advantages-and-disadvantages-installation/232)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 2\
**Last updated:** [May 12, 2025, 8:41am UTC](https://forumautomation.com/t/flow-measurement-magnetic-flow-meters-application-advantages-and-disadvantages-installation/232 "2025-05-12T08:41:05Z")

</div>

Application of Magnetic Flow Meters : Magnetic Flow meter measures the volumetric rate of flow any liquid that has adequate electrical conductivity. Most petroleum hydrocarbons have insufficient conductivity to be measur…

---

## [Working of conductive level switches](https://forumautomation.com/t/working-of-conductive-level-switches/2750)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 30, 2017, 8:01pm UTC](https://forumautomation.com/t/working-of-conductive-level-switches/2750 "2017-11-30T20:01:45Z")

</div>

This type of switch, of course, only works with granular solids and liquids that are electrically conductive (e.g. potable or dirty water, acids, caustics, food liquids, coal, metal powders) and not with nonconducting ma…

---

## [Basics Conductivity measurement](https://forumautomation.com/t/basics-conductivity-measurement/3429)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 16, 2018, 5:53pm UTC](https://forumautomation.com/t/basics-conductivity-measurement/3429 "2018-04-16T17:53:38Z")

</div>

Conductivity exhibits the concentration and characteristics of a solution. Thus, by measuring the conductivity, the concentration can be determined. A particular use for these meters is the detection of NaCl, so they are…

---

## [How is Transfer function G(s) derived?](https://forumautomation.com/t/how-is-transfer-function-g-s-derived/4648)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 14, 2018, 6:19pm UTC](https://forumautomation.com/t/how-is-transfer-function-g-s-derived/4648 "2018-09-14T18:19:21Z")

</div>

How is Transfer function G(s) derived? The transfer function is commonly used in the analysis of single-input single-output electronic filters, for instance. It is mainly used in signal processing, communication theory, …

---

## [How is Radar level technology useful?](https://forumautomation.com/t/how-is-radar-level-technology-useful/4770)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 27, 2018, 4:17pm UTC](https://forumautomation.com/t/how-is-radar-level-technology-useful/4770 "2018-09-27T16:17:53Z")

</div>

How is Radar level technology useful? How do you know if the radar is the right technology for your tank? In order to know how radar benefits we must know about radar technology. Radar technology has become so popular …

---

## [What are the difference between PSV and PRV?](https://forumautomation.com/t/what-are-the-difference-between-psv-and-prv/4539)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 3, 2018, 5:35pm UTC](https://forumautomation.com/t/what-are-the-difference-between-psv-and-prv/4539 "2018-09-03T17:35:47Z")

</div>

What are PSV and PRV? PSV is a pressure safety valve and PRV is a pressure relief valve. Both are used for process safety. So it is important that an engineer must know about PSV and PRV. They make the decision about whi…

---

## [What are the types of ultrasonic flow meters ? How it works?](https://forumautomation.com/t/what-are-the-types-of-ultrasonic-flow-meters-how-it-works/1688)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 1\
**Last updated:** [May 17, 2025, 1:11pm UTC](https://forumautomation.com/t/what-are-the-types-of-ultrasonic-flow-meters-how-it-works/1688 "2025-05-17T13:11:02Z")

</div>

Type of Ultrasonic meter are 1.Ultrasonic transit time 2.Ultrasonic doppler 3.Ultrasonic open channel. How ultrasonic transit time flow meter works? Transit time flow meter utilize two transducers which function as bo…

---

## [Applications of condensate pot](https://forumautomation.com/t/applications-of-condensate-pot/4055)

<div class="topic-metadata">

**Author:** [@areejsidhik](https://forumautomation.com/u/areejsidhik)\
**Replies:** 0\
**Last updated:** [July 9, 2018, 5:51am UTC](https://forumautomation.com/t/applications-of-condensate-pot/4055 "2018-07-09T05:51:44Z")

</div>

What is condensate pot ? It is designed to trap any foreign material from the pipeline, preventing damage to the sensitive instrumentation components. The condensate is drained from the bottom valve connection, and ar…

---

## [Variable capacitance transducers, working and types](https://forumautomation.com/t/variable-capacitance-transducers-working-and-types/3036)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 26, 2018, 7:24pm UTC](https://forumautomation.com/t/variable-capacitance-transducers-working-and-types/3036 "2018-01-26T19:24:58Z")

</div>

Principle: The principle of variable capacitance is used in displacement measuring transducers in various ways. Capacitance is a function of effective area of conductor, the separation between the conductors and the di…

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=2&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=4&per_page=50)
