# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=27

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 28

---

## [What does a marshalling cabinet do](https://forumautomation.com/t/what-does-a-marshalling-cabinet-do/9786)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [August 25, 2021, 3:28am UTC](https://forumautomation.com/t/what-does-a-marshalling-cabinet-do/9786 "2021-08-25T03:28:11Z")

</div>

For what purpose do we use a marshalling cabinet

---

## [If the vessel filled with heavier density fluid so an interface level transmitter should show](https://forumautomation.com/t/if-the-vessel-filled-with-heavier-density-fluid-so-an-interface-level-transmitter-should-show/9175)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [February 17, 2021, 5:07am UTC](https://forumautomation.com/t/if-the-vessel-filled-with-heavier-density-fluid-so-an-interface-level-transmitter-should-show/9175 "2021-02-17T05:07:48Z")

</div>

Interface level transmitter output is A: Zero B : 50% C : 100%

---

## [Can an instrument be used without calibration or prior assurance of its accuracy? Why or why not?](https://forumautomation.com/t/can-an-instrument-be-used-without-calibration-or-prior-assurance-of-its-accuracy-why-or-why-not/12307)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 27, 2024, 9:55am UTC](https://forumautomation.com/t/can-an-instrument-be-used-without-calibration-or-prior-assurance-of-its-accuracy-why-or-why-not/12307 "2024-07-27T09:55:21Z")

</div>

Can an instrument be used without calibration or prior assurance of its accuracy? Why or why not?

---

## [Problems related to diagnostic alarm?](https://forumautomation.com/t/problems-related-to-diagnostic-alarm/9121)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [February 1, 2021, 3:16pm UTC](https://forumautomation.com/t/problems-related-to-diagnostic-alarm/9121 "2021-02-01T15:16:23Z")

</div>

What could possibly triggered the broken wire diagnostic alarm other than a broken wire? Can temperature possibly changes the current reading value or any surge interference perhaps, and what would be the cause of it

---

## [Problems in the furnace ignitor](https://forumautomation.com/t/problems-in-the-furnace-ignitor/8942)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 11, 2020, 11:03am UTC](https://forumautomation.com/t/problems-in-the-furnace-ignitor/8942 "2020-12-11T11:03:52Z")

</div>

This is ignitor of furnace , when I start up the hot oil system, the ignitor won’t ignite I have to adapt distance of ignition probe with tube of fuel.

---

## [Problems in vibration probe](https://forumautomation.com/t/problems-in-vibration-probe/8998)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 23, 2020, 6:14am UTC](https://forumautomation.com/t/problems-in-vibration-probe/8998 "2020-12-23T06:14:13Z")

</div>

Series Industrial Transmitter, with Dynamic Signal Sensor ,. my problem is the vibration probe it shows 0mm/s on DCS but the Cooling fan still working and I have checked terminal Already there is supply 19 Vdc.

---

## [How to linearise a temperature transmitter using HART communicator?](https://forumautomation.com/t/how-to-linearise-a-temperature-transmitter-using-hart-communicator/8838)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 20, 2020, 1:13pm UTC](https://forumautomation.com/t/how-to-linearise-a-temperature-transmitter-using-hart-communicator/8838 "2020-11-20T13:13:48Z")

</div>

How to use a HART communicator to linearise a temperature transmitter

---

## [What are the different types of cable termination?](https://forumautomation.com/t/what-are-the-different-types-of-cable-termination/13514)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 7, 2025, 12:02pm UTC](https://forumautomation.com/t/what-are-the-different-types-of-cable-termination/13514 "2025-09-07T12:02:44Z")

</div>

What are the different types of cable termination?

---

## [What should 02% be for flue gas analysis?](https://forumautomation.com/t/what-should-02-be-for-flue-gas-analysis/13581)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [September 27, 2025, 8:51am UTC](https://forumautomation.com/t/what-should-02-be-for-flue-gas-analysis/13581 "2025-09-27T08:51:20Z")

</div>

What should 02% be for flue gas analysis?

---

## [Explain the commissioning procedure of a reflex type level gauge on steam drum](https://forumautomation.com/t/explain-the-commissioning-procedure-of-a-reflex-type-level-gauge-on-steam-drum/9023)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 29, 2020, 5:13am UTC](https://forumautomation.com/t/explain-the-commissioning-procedure-of-a-reflex-type-level-gauge-on-steam-drum/9023 "2020-12-29T05:13:14Z")

</div>

What is the commissioning procedure of a reflex type level gauge on steam drum, while on running boiler or pressurized drum?

---

## [What are Danfoss Solenoid Valves?](https://forumautomation.com/t/what-are-danfoss-solenoid-valves/12760)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 5, 2024, 1:44pm UTC](https://forumautomation.com/t/what-are-danfoss-solenoid-valves/12760 "2024-11-05T13:44:59Z")

</div>

What are Danfoss Solenoid Valves?

---

## [Which instrument is this and what is its use](https://forumautomation.com/t/which-instrument-is-this-and-what-is-its-use/8967)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 16, 2020, 4:29am UTC](https://forumautomation.com/t/which-instrument-is-this-and-what-is-its-use/8967 "2020-12-16T04:29:22Z")

</div>

What is the use of this instrument

---

## [What does Cv stands for? Mention the significance of Cv](https://forumautomation.com/t/what-does-cv-stands-for-mention-the-significance-of-cv/11107)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [May 2, 2023, 7:16am UTC](https://forumautomation.com/t/what-does-cv-stands-for-mention-the-significance-of-cv/11107 "2023-05-02T07:16:10Z")

</div>

The “valve flow coefficient” is abbreviated as Cv. Significance of Cv: Cv indicates the volume of fluid that can pass through a valve when it is fully open. The capacity of a control valve to flow fluid is measured by…

---

## [SIL Certifications](https://forumautomation.com/t/sil-certifications/4233)

<div class="topic-metadata">

**Author:** [@aryasahil](https://forumautomation.com/u/aryasahil)\
**Replies:** 0\
**Last updated:** [July 26, 2018, 9:21am UTC](https://forumautomation.com/t/sil-certifications/4233 "2018-07-26T09:21:33Z")

</div>

Hi. Are only TUV/EXIDA authorized to carry out SIL assessment & issue SIL certification?

---

## [What factors should be considered when choosing the right cathodic protection survey technique for ensuring optimal corrosion control in different types of industrial environments?](https://forumautomation.com/t/what-factors-should-be-considered-when-choosing-the-right-cathodic-protection-survey-technique-for-ensuring-optimal-corrosion-control-in-different-types-of-industrial-environments/12832)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 18, 2024, 1:12am UTC](https://forumautomation.com/t/what-factors-should-be-considered-when-choosing-the-right-cathodic-protection-survey-technique-for-ensuring-optimal-corrosion-control-in-different-types-of-industrial-environments/12832 "2024-11-18T01:12:50Z")

</div>

What factors should be considered when choosing the right cathodic protection survey technique for ensuring optimal corrosion control in different types of industrial environments?

---

## [What is the common problem in a control valve?](https://forumautomation.com/t/what-is-the-common-problem-in-a-control-valve/13675)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 2\
**Last updated:** [October 20, 2026, 4:12am UTC](https://forumautomation.com/t/what-is-the-common-problem-in-a-control-valve/13675 "2026-10-20T04:12:15Z")

</div>

What is the common problem in a control valve?

---

## [What is fluid coking and why is it done in many industrial process](https://forumautomation.com/t/what-is-fluid-coking-and-why-is-it-done-in-many-industrial-process/9281)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 26, 2021, 5:55am UTC](https://forumautomation.com/t/what-is-fluid-coking-and-why-is-it-done-in-many-industrial-process/9281 "2021-03-26T05:55:11Z")

</div>

Explain fluid coking and what is the need for fluid coking in industries

---

## [What is the difference between a transmitter and a transducer](https://forumautomation.com/t/what-is-the-difference-between-a-transmitter-and-a-transducer/9292)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 31, 2021, 6:25am UTC](https://forumautomation.com/t/what-is-the-difference-between-a-transmitter-and-a-transducer/9292 "2021-03-31T06:25:26Z")

</div>

Explain the difference between the transmitter and the transducer

---

## [Octagon 5066 with DOS 6.22, 485 modbus rtu driver](https://forumautomation.com/t/octagon-5066-with-dos-6-22-485-modbus-rtu-driver/5455)

<div class="topic-metadata">

**Author:** [@onixx](https://forumautomation.com/u/onixx)\
**Replies:** 0\
**Last updated:** [December 10, 2018, 1:51pm UTC](https://forumautomation.com/t/octagon-5066-with-dos-6-22-485-modbus-rtu-driver/5455 "2018-12-10T13:51:04Z")

</div>

Hello. Could you help me sketch a plan of action. I have an old mini computer Octagon 5066 with DOS 6.22 OS system. The board has 485 interface. There is also another device which transmitting parameters using 485 Modbu…

---

## [Problems related to HMI Programming](https://forumautomation.com/t/problems-related-to-hmi-programming/9262)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 19, 2021, 10:29am UTC](https://forumautomation.com/t/problems-related-to-hmi-programming/9262 "2021-03-19T10:29:53Z")

</div>

The Siemens HMI is not accepting the admin password in runtime program. Before it was ok and was running for years. No one has changed the password. There is no mmc and backup with us. What could be the reason and possib…

---

## [What is the Range of the pH Transmitter?](https://forumautomation.com/t/what-is-the-range-of-the-ph-transmitter/11884)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [March 21, 2024, 4:55am UTC](https://forumautomation.com/t/what-is-the-range-of-the-ph-transmitter/11884 "2024-03-21T04:55:35Z")

</div>

What is the Range of the pH Transmitter? The pH levels that a pH transmitter can reliably measure and communicate are usually referred to as its range. To determine a solution’s acidity or alkalinity, pH transmitters…

---

## [Can I use PWM to control a Solenoid Valve through a PLC?](https://forumautomation.com/t/can-i-use-pwm-to-control-a-solenoid-valve-through-a-plc/8332)

<div class="topic-metadata">

**Author:** [@kunalv](https://forumautomation.com/u/kunalv)\
**Replies:** 0\
**Last updated:** [May 27, 2020, 7:13am UTC](https://forumautomation.com/t/can-i-use-pwm-to-control-a-solenoid-valve-through-a-plc/8332 "2020-05-27T07:13:12Z")

</div>

I am looking at controlling the flow-rate of one liquid through a Solenoid Valve in a closed loop system, which takes input from another stream of liquid. Objective is to mix the two liquids at the right concentration d…

---

## [What is the turn down ratio in a boiler?](https://forumautomation.com/t/what-is-the-turn-down-ratio-in-a-boiler/8932)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 9, 2020, 6:09am UTC](https://forumautomation.com/t/what-is-the-turn-down-ratio-in-a-boiler/8932 "2020-12-09T06:09:57Z")

</div>

Explain boilers turn down ratio

---

## [Probe driver and the three wires used on a probe driver](https://forumautomation.com/t/probe-driver-and-the-three-wires-used-on-a-probe-driver/131)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 3:06pm UTC](https://forumautomation.com/t/probe-driver-and-the-three-wires-used-on-a-probe-driver/131 "2014-10-03T15:06:03Z")

</div>

Probe driver is an amplifier installed in the field closer to the sensor. It transmits the field vibration signal to the remote control panel. The other name for the probe driver is ‘proximeter’. Radial, velocity and acc…

---

## [Why use 24v power for vibration, why we keep always-10 voltage for adjustment of vibration?](https://forumautomation.com/t/why-use-24v-power-for-vibration-why-we-keep-always-10-voltage-for-adjustment-of-vibration/8922)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 7, 2020, 5:28am UTC](https://forumautomation.com/t/why-use-24v-power-for-vibration-why-we-keep-always-10-voltage-for-adjustment-of-vibration/8922 "2020-12-07T05:28:49Z")

</div>

IS 24V compulsory for vibration

---

## [What will be the output of vibration probe, and how much volt in with and without vibration?](https://forumautomation.com/t/what-will-be-the-output-of-vibration-probe-and-how-much-volt-in-with-and-without-vibration/8864)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 26, 2020, 2:59am UTC](https://forumautomation.com/t/what-will-be-the-output-of-vibration-probe-and-how-much-volt-in-with-and-without-vibration/8864 "2020-11-26T02:59:35Z")

</div>

Vibration probe output

---

## [Remote seal diaphram Type Level Measurement](https://forumautomation.com/t/remote-seal-diaphram-type-level-measurement/6694)

<div class="topic-metadata">

**Author:** [@murtaza\_salim](https://forumautomation.com/u/murtaza_salim)\
**Replies:** 0\
**Last updated:** [July 8, 2019, 3:52am UTC](https://forumautomation.com/t/remote-seal-diaphram-type-level-measurement/6694 "2019-07-08T03:52:09Z")

</div>

Diaphram LT is used to measure ammonia tank level at a nominal 37% level. It was observed that despite the level increase, the level was stuck at 37% causing ammonia overflow. When we reduced the level, the response of t…

---

## [What are the different types of electromagnetic flow meters?](https://forumautomation.com/t/what-are-the-different-types-of-electromagnetic-flow-meters/13796)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 2\
**Last updated:** [December 29, 2025, 9:40am UTC](https://forumautomation.com/t/what-are-the-different-types-of-electromagnetic-flow-meters/13796 "2025-12-29T09:40:20Z")

</div>

What are the different types of electromagnetic flow meters?

---

## [Problems in vortex flow meter](https://forumautomation.com/t/problems-in-vortex-flow-meter/9466)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [June 3, 2021, 6:00am UTC](https://forumautomation.com/t/problems-in-vortex-flow-meter/9466 "2021-06-03T06:00:30Z")

</div>

vortex flow meter local side shows reading but control room side 0 showing no value change ?

---

## [Tubing Selection/ Sizing](https://forumautomation.com/t/tubing-selection-sizing/11294)

<div class="topic-metadata">

**Author:** [@PEC\_E\_I-2](https://forumautomation.com/u/PEC_E_I-2)\
**Replies:** 0\
**Last updated:** [July 6, 2023, 10:58am UTC](https://forumautomation.com/t/tubing-selection-sizing/11294 "2023-07-06T10:58:07Z")

</div>

I am required to select tubing size and thickness which is to be laid from SSV/ SCSSV to WHCP. Tubing Material is A-213. Shut-in Pressure of Wellhead is 750 Psig. I do not know the hydraulic pressure though. Now how can …

---

## [What are the common applications of vacuum gauges?](https://forumautomation.com/t/what-are-the-common-applications-of-vacuum-gauges/12287)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 19, 2024, 5:53pm UTC](https://forumautomation.com/t/what-are-the-common-applications-of-vacuum-gauges/12287 "2024-07-19T17:53:49Z")

</div>

What are the common applications of vacuum gauges?

---

## [How to check control valve passing?](https://forumautomation.com/t/how-to-check-control-valve-passing/13436)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 23, 2025, 9:44am UTC](https://forumautomation.com/t/how-to-check-control-valve-passing/13436 "2025-08-23T09:44:37Z")

</div>

How to check control valve passing?

---

## [How accurate is a micro motion flow meter?](https://forumautomation.com/t/how-accurate-is-a-micro-motion-flow-meter/13797)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [December 27, 2025, 7:41am UTC](https://forumautomation.com/t/how-accurate-is-a-micro-motion-flow-meter/13797 "2025-12-27T07:41:03Z")

</div>

How accurate is a micro motion flow meter?

---

## [Problems related to flow transmitter](https://forumautomation.com/t/problems-related-to-flow-transmitter/8871)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 27, 2020, 4:11am UTC](https://forumautomation.com/t/problems-related-to-flow-transmitter/8871 "2020-11-27T04:11:10Z")

</div>

Magnetic FT totaliser measure 50ltr of solution passed but actual solution was 42 ltr and it was matched with solution tank LT. So how I resolved this problem.Why FT measures max flow than actual…? Solution = Hydrogen pe…

---

## [IF HART works at analog O/P if so then how is it possible one pair of wire can work at AI and AO at the same time](https://forumautomation.com/t/if-hart-works-at-analog-o-p-if-so-then-how-is-it-possible-one-pair-of-wire-can-work-at-ai-and-ao-at-the-same-time/8836)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 20, 2020, 6:56am UTC](https://forumautomation.com/t/if-hart-works-at-analog-o-p-if-so-then-how-is-it-possible-one-pair-of-wire-can-work-at-ai-and-ao-at-the-same-time/8836 "2020-11-20T06:56:38Z")

</div>

How is it possible if one pair of wire works at AI and AO at the same time if the HART works at analog O/P

---

## [What is the advantages Calibration in Industrial testing Instruments?](https://forumautomation.com/t/what-is-the-advantages-calibration-in-industrial-testing-instruments/12701)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 16, 2024, 4:18pm UTC](https://forumautomation.com/t/what-is-the-advantages-calibration-in-industrial-testing-instruments/12701 "2024-10-16T16:18:08Z")

</div>

What is the advantages Calibration in Industrial testing Instruments?

---

## [What is the purpose of split control loop in a control valve](https://forumautomation.com/t/what-is-the-purpose-of-split-control-loop-in-a-control-valve/8812)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 12, 2020, 4:00am UTC](https://forumautomation.com/t/what-is-the-purpose-of-split-control-loop-in-a-control-valve/8812 "2020-11-12T04:00:10Z")

</div>

How to use split control loop to control the control valve

---

## [Has anyone seen this type of protection before](https://forumautomation.com/t/has-anyone-seen-this-type-of-protection-before/8320)

<div class="topic-metadata">

**Author:** [@thompa25](https://forumautomation.com/u/thompa25)\
**Replies:** 0\
**Last updated:** [May 23, 2020, 6:45pm UTC](https://forumautomation.com/t/has-anyone-seen-this-type-of-protection-before/8320 "2020-05-23T18:45:33Z")

</div>

Came across an exd junction box for a motor winding rtd. It’s really old and been there for years and has finally given up. when opening it up I found all the spare terminals and one lef of each side of the rtd tied down…

---

## [Why we need to measure flow coefficient in a control valve?](https://forumautomation.com/t/why-we-need-to-measure-flow-coefficient-in-a-control-valve/8833)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 19, 2020, 10:21am UTC](https://forumautomation.com/t/why-we-need-to-measure-flow-coefficient-in-a-control-valve/8833 "2020-11-19T10:21:24Z")

</div>

The purpose of measuring flow coefficient in a control valve

---

## [What is a Partial Stroke Test (PST)? Why is PST Important in ESDV?](https://forumautomation.com/t/what-is-a-partial-stroke-test-pst-why-is-pst-important-in-esdv/13014)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [February 14, 2025, 12:09pm UTC](https://forumautomation.com/t/what-is-a-partial-stroke-test-pst-why-is-pst-important-in-esdv/13014 "2025-02-14T12:09:30Z")

</div>

What is a Partial Stroke Test (PST)? It is possible to evaluate the operation of an Emergency Shutdown Valve (ESDV) by the use of a method known as a Partial Stroke Test (PST), which does not involve completely closing…

---

## [Problems related to valve positioner](https://forumautomation.com/t/problems-related-to-valve-positioner/9329)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 15, 2021, 11:30am UTC](https://forumautomation.com/t/problems-related-to-valve-positioner/9329 "2021-04-15T11:30:02Z")

</div>

Butterfly valve positioner is not working Air ok 4 to20 MA ok Water went inside the positioner and its not working since then.

---

## [What is the role of fieldbus on a network structure](https://forumautomation.com/t/what-is-the-role-of-fieldbus-on-a-network-structure/8808)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 11, 2020, 10:55am UTC](https://forumautomation.com/t/what-is-the-role-of-fieldbus-on-a-network-structure/8808 "2020-11-11T10:55:05Z")

</div>

How does a fieldbus work on network structure

---

## [Should a PLC have its own dedicated power supply or can I connect it to the same bus as my 24V servomotor?](https://forumautomation.com/t/should-a-plc-have-its-own-dedicated-power-supply-or-can-i-connect-it-to-the-same-bus-as-my-24v-servomotor/12362)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 1\
**Last updated:** [August 10, 2024, 8:56am UTC](https://forumautomation.com/t/should-a-plc-have-its-own-dedicated-power-supply-or-can-i-connect-it-to-the-same-bus-as-my-24v-servomotor/12362 "2024-08-10T08:56:17Z")

</div>

Should a PLC have its own dedicated power supply or can I connect it to the same bus as my 24V servomotor?

---

## [What is the need for sequence control in steam generation boiler](https://forumautomation.com/t/what-is-the-need-for-sequence-control-in-steam-generation-boiler/9372)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [May 5, 2021, 11:28am UTC](https://forumautomation.com/t/what-is-the-need-for-sequence-control-in-steam-generation-boiler/9372 "2021-05-05T11:28:11Z")

</div>

Explain the function of sequence control in a steam generation boiler

---

## [What is impulse piping](https://forumautomation.com/t/what-is-impulse-piping/9669)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [July 30, 2021, 4:49am UTC](https://forumautomation.com/t/what-is-impulse-piping/9669 "2021-07-30T04:49:46Z")

</div>

Explain the need for impulse piping in a process and what does it do

---

## [How could you determine the air pressure that is needed to open and close the valve](https://forumautomation.com/t/how-could-you-determine-the-air-pressure-that-is-needed-to-open-and-close-the-valve/8994)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 22, 2020, 6:21am UTC](https://forumautomation.com/t/how-could-you-determine-the-air-pressure-that-is-needed-to-open-and-close-the-valve/8994 "2020-12-22T06:21:53Z")

</div>

is it possible to know the air pressure to open and close the valve

---

## [What is Pressure? How is it Measured?](https://forumautomation.com/t/what-is-pressure-how-is-it-measured/12989)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [January 31, 2025, 3:02pm UTC](https://forumautomation.com/t/what-is-pressure-how-is-it-measured/12989 "2025-01-31T15:02:34Z")

</div>

What is Pressure? Pressure is the amount of fence measured as force per unit area. Pressure is defined as the ratio of forces perpendicular to the surface. Inside fluids, pressure is caused by the weight of the liquid ab…

---

## [11 things to look while choosing oxygen analyzer for oxygen concentrator -](https://forumautomation.com/t/11-things-to-look-while-choosing-oxygen-analyzer-for-oxygen-concentrator/9450)

<div class="topic-metadata">

**Author:** [@wavevisions98](https://forumautomation.com/u/wavevisions98)\
**Replies:** 0\
**Last updated:** [May 31, 2021, 5:00am UTC](https://forumautomation.com/t/11-things-to-look-while-choosing-oxygen-analyzer-for-oxygen-concentrator/9450 "2021-05-31T05:00:38Z")

</div>

11 Things To Check In Any Oxygen Analyzer For Oxygen Concentrator: Does this oxygen analyzer measure the 4 parameters – Oxygen purity, flow, pressure, & temperature? Does this oxygen analyzer have a long-life sensor so…

---

## [Problems in GWR level transmitter](https://forumautomation.com/t/problems-in-gwr-level-transmitter/9225)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 6, 2021, 3:53am UTC](https://forumautomation.com/t/problems-in-gwr-level-transmitter/9225 "2021-03-06T03:53:38Z")

</div>

i have two E&H FMP54 type GWR level transmitter on stream drum.one is used for controlling (FF) and another one is used as tripping transmitter (HART) which is conneted on ESD system… when the level goes above 100%… HART…

---

## [What should be done before doing a transmitter calibration](https://forumautomation.com/t/what-should-be-done-before-doing-a-transmitter-calibration/9092)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [January 23, 2021, 7:16am UTC](https://forumautomation.com/t/what-should-be-done-before-doing-a-transmitter-calibration/9092 "2021-01-23T07:16:37Z")

</div>

How to check a transmitter before its calibration

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=26&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=28&per_page=50)
