# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=25

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 26

---

## [What is the need for instrument calibration](https://forumautomation.com/t/what-is-the-need-for-instrument-calibration/9671)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [July 31, 2021, 5:05am UTC](https://forumautomation.com/t/what-is-the-need-for-instrument-calibration/9671 "2021-07-31T05:05:33Z")

</div>

Why should we do instrument calibration, what is the purpose

---

## [Hydraulic Accumulator - Temperature Effect on Nitrogen Pre-Charge](https://forumautomation.com/t/hydraulic-accumulator-temperature-effect-on-nitrogen-pre-charge/11431)

<div class="topic-metadata">

**Author:** [@dstuart82](https://forumautomation.com/u/dstuart82)\
**Replies:** 0\
**Last updated:** [August 24, 2023, 2:43pm UTC](https://forumautomation.com/t/hydraulic-accumulator-temperature-effect-on-nitrogen-pre-charge/11431 "2023-08-24T14:43:24Z")

</div>

Good Afternoon, I am currently studying for a degree in Instrumentation, Measurement & Control. As part of my learning, I have been askedto write a paper which discusses the effect (if any) that outside temperature has o…

---

## [Why resource block and transducer block is used in fieldbus foundation?](https://forumautomation.com/t/why-resource-block-and-transducer-block-is-used-in-fieldbus-foundation/8774)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 3, 2020, 3:34pm UTC](https://forumautomation.com/t/why-resource-block-and-transducer-block-is-used-in-fieldbus-foundation/8774 "2020-11-03T15:34:59Z")

</div>

What is the need for resource block and transducer block in fieldbus foundation

---

## [PFD Calculation](https://forumautomation.com/t/pfd-calculation/11872)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [March 15, 2024, 11:28am UTC](https://forumautomation.com/t/pfd-calculation/11872 "2024-03-15T11:28:00Z")

</div>

There are a few simple formulas that can be utilized to calculate PFD. The proof test coverage is not taken into consideration. It is considered that the procedure used for the test is in every way accurate. In the m…

---

## [What is the difference between MTBF and MTTR?](https://forumautomation.com/t/what-is-the-difference-between-mtbf-and-mttr/13360)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 12, 2025, 4:42am UTC](https://forumautomation.com/t/what-is-the-difference-between-mtbf-and-mttr/13360 "2025-07-12T04:42:27Z")

</div>

What is the difference between MTBF and MTTR?

---

## [What is Repeatability in Pressure Measurements?](https://forumautomation.com/t/what-is-repeatability-in-pressure-measurements/11738)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [January 26, 2024, 11:19am UTC](https://forumautomation.com/t/what-is-repeatability-in-pressure-measurements/11738 "2024-01-26T11:19:35Z")

</div>

What is Repeatability in Pressure Measurements? Pressure measurements are essential in many industries, influencing industrial processes, product quality, and safety. In this setting, repeatability develops as an import…

---

## [Applications of remote diaphragm seal type transmitter](https://forumautomation.com/t/applications-of-remote-diaphragm-seal-type-transmitter/8733)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 27, 2020, 2:36pm UTC](https://forumautomation.com/t/applications-of-remote-diaphragm-seal-type-transmitter/8733 "2020-10-27T14:36:24Z")

</div>

For which applications do we use remote diaphragm seal type transmitter

---

## [How does NAMUR 43 helps in the identification defects in sensors?](https://forumautomation.com/t/how-does-namur-43-helps-in-the-identification-defects-in-sensors/11259)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [June 22, 2023, 6:53am UTC](https://forumautomation.com/t/how-does-namur-43-helps-in-the-identification-defects-in-sensors/11259 "2023-06-22T06:53:37Z")

</div>

The NAMUR, which is an association for process automation in the chemical industry, has developed a guideline that bears its name and is referred to as NAMUR 43. NAMUR 43 devotes its attention exclusively to the monitori…

---

## [Problems related to HMI](https://forumautomation.com/t/problems-related-to-hmi/9326)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 14, 2021, 11:13am UTC](https://forumautomation.com/t/problems-related-to-hmi/9326 "2021-04-14T11:13:35Z")

</div>

The HMI value is showing 0 . What is the reason and how to solve this

---

## [How to mount electronic instruments in industry?](https://forumautomation.com/t/how-to-mount-electronic-instruments-in-industry/6284)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 23, 2019, 6:59pm UTC](https://forumautomation.com/t/how-to-mount-electronic-instruments-in-industry/6284 "2019-04-23T18:59:29Z")

</div>

There are different categories of mounting systems of electronic instruments in industries. They are categorized by the way they are intended to be used physically, resulting in certain types of construction: Site moun…

---

## [What is a CIP cleaning](https://forumautomation.com/t/what-is-a-cip-cleaning/9352)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 26, 2021, 5:54am UTC](https://forumautomation.com/t/what-is-a-cip-cleaning/9352 "2021-04-26T05:54:09Z")

</div>

Explain the need for CIP cleaning and where is it done

---

## [What is feedback and feed-forward loop?](https://forumautomation.com/t/what-is-feedback-and-feed-forward-loop/9037)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 31, 2020, 6:20am UTC](https://forumautomation.com/t/what-is-feedback-and-feed-forward-loop/9037 "2020-12-31T06:20:21Z")

</div>

Explain the feedback and feed-forward loop

---

## [What are the processes in cable making?](https://forumautomation.com/t/what-are-the-processes-in-cable-making/12931)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 8, 2025, 5:09am UTC](https://forumautomation.com/t/what-are-the-processes-in-cable-making/12931 "2025-01-08T05:09:35Z")

</div>

What are the 5 processes in cable making?

---

## [What Is TK-3 Calibrator?](https://forumautomation.com/t/what-is-tk-3-calibrator/12415)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 13, 2024, 4:18pm UTC](https://forumautomation.com/t/what-is-tk-3-calibrator/12415 "2024-08-13T16:18:16Z")

</div>

What Is TK-3 Calibrator?

---

## [Type of vibration pick-up (contact type or non-contact type) commonly installed on a gas compressor](https://forumautomation.com/t/type-of-vibration-pick-up-contact-type-or-non-contact-type-commonly-installed-on-a-gas-compressor/130)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 2:57pm UTC](https://forumautomation.com/t/type-of-vibration-pick-up-contact-type-or-non-contact-type-commonly-installed-on-a-gas-compressor/130 "2014-10-03T14:57:12Z")

</div>

A ‘non contact type’- eddy probe is installed on gas compressors

---

## [Are there any wireless sensors to detect vibrations in an object?](https://forumautomation.com/t/are-there-any-wireless-sensors-to-detect-vibrations-in-an-object/12780)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 6, 2024, 4:26pm UTC](https://forumautomation.com/t/are-there-any-wireless-sensors-to-detect-vibrations-in-an-object/12780 "2024-11-06T16:26:25Z")

</div>

Are there any wireless sensors to detect vibrations in an object?

---

## [Explosion protection enclosure types](https://forumautomation.com/t/explosion-protection-enclosure-types/262)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [February 22, 2015, 6:09am UTC](https://forumautomation.com/t/explosion-protection-enclosure-types/262 "2015-02-22T06:09:11Z")

</div>

Ex d Flameproof Enclosures Motors with sliprings & commutators 3 phase squirrel cage motors Equipment that could ignite an explosive atmosphere housed within a substantial enclosure without transmitting internal explosio…

---

## [What would happen if the displacer has a hole in it while it is in line?](https://forumautomation.com/t/what-would-happen-if-the-displacer-has-a-hole-in-it-while-it-is-in-line/8930)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 8, 2020, 10:10am UTC](https://forumautomation.com/t/what-would-happen-if-the-displacer-has-a-hole-in-it-while-it-is-in-line/8930 "2020-12-08T10:10:07Z")

</div>

Damaged displacer in line

---

## [What is the control valve's transfer function?](https://forumautomation.com/t/what-is-the-control-valves-transfer-function/12616)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [September 24, 2024, 12:19pm UTC](https://forumautomation.com/t/what-is-the-control-valves-transfer-function/12616 "2024-09-24T12:19:51Z")

</div>

The transfer function for a control valve is a mathematical representation of the connection between the input signal (control action) & the output signal (flow rate or valve position). This relationship is essential…

---

## [Explain the need for bypass valve in a process](https://forumautomation.com/t/explain-the-need-for-bypass-valve-in-a-process/9545)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [June 28, 2021, 7:34am UTC](https://forumautomation.com/t/explain-the-need-for-bypass-valve-in-a-process/9545 "2021-06-28T07:34:36Z")

</div>

What is the purpose of a bypass valve

---

## [What is the maintenance of turbine flow meter?](https://forumautomation.com/t/what-is-the-maintenance-of-turbine-flow-meter/12923)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 2, 2025, 9:59am UTC](https://forumautomation.com/t/what-is-the-maintenance-of-turbine-flow-meter/12923 "2025-01-02T09:59:54Z")

</div>

What is the maintenance of turbine flow meter?

---

## [What are the advantages and disadvantages of diaphragm valves?](https://forumautomation.com/t/what-are-the-advantages-and-disadvantages-of-diaphragm-valves/12619)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 1, 2024, 5:09am UTC](https://forumautomation.com/t/what-are-the-advantages-and-disadvantages-of-diaphragm-valves/12619 "2024-10-01T05:09:43Z")

</div>

What are the advantages and disadvantages of diaphragm valves?

---

## [When would we use zero trim and what is it?](https://forumautomation.com/t/when-would-we-use-zero-trim-and-what-is-it/8997)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 22, 2020, 11:59am UTC](https://forumautomation.com/t/when-would-we-use-zero-trim-and-what-is-it/8997 "2020-12-22T11:59:44Z")

</div>

what is the purpose of zero trim

---

## [Explain the difference between the falling trigger and rising trigger?](https://forumautomation.com/t/explain-the-difference-between-the-falling-trigger-and-rising-trigger/9080)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [January 18, 2021, 7:00am UTC](https://forumautomation.com/t/explain-the-difference-between-the-falling-trigger-and-rising-trigger/9080 "2021-01-18T07:00:49Z")

</div>

How is a falling trigger different from a rising trigger

---

## [What is the meaning of ±0.015%±4 Count in accuracy of any instrument?](https://forumautomation.com/t/what-is-the-meaning-of-0-015-4-count-in-accuracy-of-any-instrument/11701)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [January 10, 2024, 3:19pm UTC](https://forumautomation.com/t/what-is-the-meaning-of-0-015-4-count-in-accuracy-of-any-instrument/11701 "2024-01-10T15:19:19Z")

</div>

What is the meaning of ±0.015%±4 Count in accuracy of any instrument? A key factor in determining the trustworthiness of measurements obtained from the device is instrument accuracy. An expression representing the to…

---

## [WHAT IS CALIBRATION?](https://forumautomation.com/t/what-is-calibration/11079)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [April 21, 2023, 7:18pm UTC](https://forumautomation.com/t/what-is-calibration/11079 "2023-04-21T19:18:12Z")

</div>

WHAT IS CALIBRATION? To detect or eliminate unacceptable variations, calibration is the process of comparing an instrument, measuring and test equipment, the unit under test, an unit under calibration, the device und…

---

## [An overview of the multivariable measurement technology](https://forumautomation.com/t/an-overview-of-the-multivariable-measurement-technology/4627)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 0\
**Last updated:** [September 12, 2018, 4:26pm UTC](https://forumautomation.com/t/an-overview-of-the-multivariable-measurement-technology/4627 "2018-09-12T16:26:27Z")

</div>

An overview of the multivariable measurement technology What is the multivariable measurement? The measurement of multiple process variables in one instrument in order to accurately measure volume as well as mass flow th…

---

## [What is the differnce between pt100 to pt1000?](https://forumautomation.com/t/what-is-the-differnce-between-pt100-to-pt1000/8960)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 15, 2020, 5:10am UTC](https://forumautomation.com/t/what-is-the-differnce-between-pt100-to-pt1000/8960 "2020-12-15T05:10:16Z")

</div>

How is a pt100 different from pt1000

---

## [Which is right for your application, a guided laser or ultrasonic distance sensors?](https://forumautomation.com/t/which-is-right-for-your-application-a-guided-laser-or-ultrasonic-distance-sensors/12819)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 21, 2024, 1:59pm UTC](https://forumautomation.com/t/which-is-right-for-your-application-a-guided-laser-or-ultrasonic-distance-sensors/12819 "2024-11-21T13:59:48Z")

</div>

Which is right for your application, a guided laser or ultrasonic distance sensors?

---

## [Basic Sensing Elements](https://forumautomation.com/t/basic-sensing-elements/4931)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [October 14, 2018, 11:39pm UTC](https://forumautomation.com/t/basic-sensing-elements/4931 "2018-10-14T23:39:05Z")

</div>

A sensing element is the physical part of the transducer that is in direct contact with the quantity to be measured, that responds to a stimuli by producing a distinct measurable output. The Mechanical element that is th…

---

## [What will be the output if the displacer fell down in online?](https://forumautomation.com/t/what-will-be-the-output-if-the-displacer-fell-down-in-online/8939)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 10, 2020, 12:23pm UTC](https://forumautomation.com/t/what-will-be-the-output-if-the-displacer-fell-down-in-online/8939 "2020-12-10T12:23:17Z")

</div>

If the displacer fell down during online then what could be the output

---

## [What is Field Device Manager and what is its purpose?](https://forumautomation.com/t/what-is-field-device-manager-and-what-is-its-purpose/12257)

<div class="topic-metadata">

**Author:** [@Sundar.S](https://forumautomation.com/u/Sundar.S)\
**Replies:** 1\
**Last updated:** [July 8, 2024, 4:50pm UTC](https://forumautomation.com/t/what-is-field-device-manager-and-what-is-its-purpose/12257 "2024-07-08T16:50:00Z")

</div>

What is Field Device Manager and what is its purpose?

---

## [Pressure transmitter problems](https://forumautomation.com/t/pressure-transmitter-problems/8807)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 11, 2020, 8:09am UTC](https://forumautomation.com/t/pressure-transmitter-problems/8807 "2020-11-11T08:09:18Z")

</div>

I have an endress hauser pressure transmitter. In transmitter display it shows accurate mA. But when i measure it by a multimeter it shows higher value. so what is the problem

---

## [Measurement of Thickness and Mass with nucleonic methods](https://forumautomation.com/t/measurement-of-thickness-and-mass-with-nucleonic-methods/6137)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 23, 2019, 5:33pm UTC](https://forumautomation.com/t/measurement-of-thickness-and-mass-with-nucleonic-methods/6137 "2019-03-23T17:33:27Z")

</div>

The quantitative reaction of particles and photons depends essentially on the concentration and mass of the particles they react with, it is to be expected that nuclear techniques can provide the means to measure such th…

---

## [Basics of interferometer, principle and operation](https://forumautomation.com/t/basics-of-interferometer-principle-and-operation/5734)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 16, 2019, 5:35pm UTC](https://forumautomation.com/t/basics-of-interferometer-principle-and-operation/5734 "2019-01-16T17:35:12Z")

</div>

The interferometer is an instrument to observe the symptoms of interference. Using the interference pattern on the He-Ne laser as one of the conditions is coherent light. An interferometer is a measuring device that util…

---

## [When the control valve is in reverse action then how much is the current at 15PSI?](https://forumautomation.com/t/when-the-control-valve-is-in-reverse-action-then-how-much-is-the-current-at-15psi/8830)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 18, 2020, 6:03am UTC](https://forumautomation.com/t/when-the-control-valve-is-in-reverse-action-then-how-much-is-the-current-at-15psi/8830 "2020-11-18T06:03:31Z")

</div>

How much will be the current, if the control valve is in 15PSI at reverse action

---

## [How to decide the LRV and URV for an interface level transmitter](https://forumautomation.com/t/how-to-decide-the-lrv-and-urv-for-an-interface-level-transmitter/9188)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [February 20, 2021, 11:18am UTC](https://forumautomation.com/t/how-to-decide-the-lrv-and-urv-for-an-interface-level-transmitter/9188 "2021-02-20T11:18:36Z")

</div>

Explain how to get the LRV and URV for an interface level tarnsmitter

---

## [Flow transmitter leakage](https://forumautomation.com/t/flow-transmitter-leakage/8778)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 4, 2020, 10:52am UTC](https://forumautomation.com/t/flow-transmitter-leakage/8778 "2020-11-04T10:52:10Z")

</div>

In a DP flow transmitter, there is a leak in HP side tubing then what could happen in flow reading. Flow decrease, flow increase, negative reading, or increase in Dp

---

## [Why do we measure differential pressure to measure close tank level in Dp tx?](https://forumautomation.com/t/why-do-we-measure-differential-pressure-to-measure-close-tank-level-in-dp-tx/8886)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 30, 2020, 11:24am UTC](https://forumautomation.com/t/why-do-we-measure-differential-pressure-to-measure-close-tank-level-in-dp-tx/8886 "2020-11-30T11:24:26Z")

</div>

what is the purpose of measuring differential pressure to measure close tank level in Dp tx

---

## [Problems related to the connection of allen bradley PLC](https://forumautomation.com/t/problems-related-to-the-connection-of-allen-bradley-plc/9320)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 12, 2021, 6:26am UTC](https://forumautomation.com/t/problems-related-to-the-connection-of-allen-bradley-plc/9320 "2021-04-12T06:26:00Z")

</div>

What is the reason of Allen Bradley redundant module show disqualified…?

---

## [How to set LRV and URV for flow nozzle flow meter](https://forumautomation.com/t/how-to-set-lrv-and-urv-for-flow-nozzle-flow-meter/4474)

<div class="topic-metadata">

**Author:** [@Kumares](https://forumautomation.com/u/Kumares)\
**Replies:** 0\
**Last updated:** [August 27, 2018, 4:47am UTC](https://forumautomation.com/t/how-to-set-lrv-and-urv-for-flow-nozzle-flow-meter/4474 "2018-08-27T04:47:57Z")

</div>

How can we take LRV and URV in flow nozzle. Can we take low value as LRV and max range as URV. pls clarify

---

## [What is Quality Management System? Different types of audit for quality management](https://forumautomation.com/t/what-is-quality-management-system-different-types-of-audit-for-quality-management/7216)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 1, 2019, 8:51am UTC](https://forumautomation.com/t/what-is-quality-management-system-different-types-of-audit-for-quality-management/7216 "2019-10-01T08:51:17Z")

</div>

\[color=#ff0000\]\[size=5\]What is Quality Management System?\[/size\]\[/color\] \[color=#073763\]\[size=3\]A QMS integrates within the organisation the multiple inner processes and aims to provide a process strategy for project im…

---

## [Intrinsically safe (is) apparatus](https://forumautomation.com/t/intrinsically-safe-is-apparatus/263)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [February 22, 2015, 6:11am UTC](https://forumautomation.com/t/intrinsically-safe-is-apparatus/263 "2015-02-22T06:11:03Z")

</div>

Intrinsically safe electrical apparatus are divided into 3 categories “ia” , “ib” and “ic” Safety Level –ia- If a single fault or any combination of 2 faults occurs during normal operation, the electrical apparatus of t…

---

## [3-wire RTD temperature transmitter shown reading in DCS -272 Deg C?](https://forumautomation.com/t/3-wire-rtd-temperature-transmitter-shown-reading-in-dcs-272-deg-c/13343)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 5, 2025, 4:35am UTC](https://forumautomation.com/t/3-wire-rtd-temperature-transmitter-shown-reading-in-dcs-272-deg-c/13343 "2025-07-05T04:35:16Z")

</div>

3-wire RTD temperature transmitter shown reading in DCS -272 Deg C?

---

## [How can you ensure the proper maintenance of pressure safety valves?](https://forumautomation.com/t/how-can-you-ensure-the-proper-maintenance-of-pressure-safety-valves/12434)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 19, 2024, 4:26pm UTC](https://forumautomation.com/t/how-can-you-ensure-the-proper-maintenance-of-pressure-safety-valves/12434 "2024-08-19T16:26:31Z")

</div>

How can you ensure the proper maintenance of pressure safety valves?

---

## [Brief Idea about ON-OFF controller](https://forumautomation.com/t/brief-idea-about-on-off-controller/210)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [December 29, 2014, 3:34am UTC](https://forumautomation.com/t/brief-idea-about-on-off-controller/210 "2014-12-29T03:34:38Z")

</div>

ON-OFF control loop is a regulation loop where the final control elements device can have only two positions For Example : Valve Two position : Fully opened Fully closed

---

## [What are the advantages of using a Torque tester in quality control?](https://forumautomation.com/t/what-are-the-advantages-of-using-a-torque-tester-in-quality-control/12492)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [August 29, 2024, 2:20pm UTC](https://forumautomation.com/t/what-are-the-advantages-of-using-a-torque-tester-in-quality-control/12492 "2024-08-29T14:20:21Z")

</div>

What are the advantages of using a Torque tester in quality control?

---

## [What are the Main Causes of Errors in Measurements with Thermocouples?](https://forumautomation.com/t/what-are-the-main-causes-of-errors-in-measurements-with-thermocouples/10922)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [March 2, 2023, 10:45am UTC](https://forumautomation.com/t/what-are-the-main-causes-of-errors-in-measurements-with-thermocouples/10922 "2023-03-02T10:45:10Z")

</div>

What are the Main Causes of Errors in Measurements with Thermocouples? The main sources of errors which can arise while measuring the temperature with thermocouples are the following: Connection of thermocouple to the …

---

## [What is the difference between accuracy and tolerance](https://forumautomation.com/t/what-is-the-difference-between-accuracy-and-tolerance/8946)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 12, 2020, 2:36am UTC](https://forumautomation.com/t/what-is-the-difference-between-accuracy-and-tolerance/8946 "2020-12-12T02:36:55Z")

</div>

How is accuracy different from tolerance

---

## [Type of vibration pick-up (contact or non-contact type) commonly installed on a gas turbine](https://forumautomation.com/t/type-of-vibration-pick-up-contact-or-non-contact-type-commonly-installed-on-a-gas-turbine/128)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 2:50pm UTC](https://forumautomation.com/t/type-of-vibration-pick-up-contact-or-non-contact-type-commonly-installed-on-a-gas-turbine/128 "2014-10-03T14:50:47Z")

</div>

On gas turbine vibration measurement, the ‘contact type’ peck-up such as a velocity or acceleration pick-up is used.

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=24&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=26&per_page=50)
