# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=24

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 25

---

## [Definition of "Pressure Sample Type Internal, back pressure"](https://forumautomation.com/t/definition-of-pressure-sample-type-internal-back-pressure/2732)

<div class="topic-metadata">

**Author:** [@Qulu\_Quliyev](https://forumautomation.com/u/Qulu_Quliyev)\
**Replies:** 0\
**Last updated:** [November 28, 2017, 6:35am UTC](https://forumautomation.com/t/definition-of-pressure-sample-type-internal-back-pressure/2732 "2017-11-28T06:35:49Z")

</div>

Dear All, I found the following definition in the valve datasheet “Pressure Sample Type Internal, back pressure”, but I don’t have clear idea what does it mean. Is there anyone who has clear explanation about it? Best Re…

---

## [What will happen if the positioner power fails in PST valve during its opertaion?](https://forumautomation.com/t/what-will-happen-if-the-positioner-power-fails-in-pst-valve-during-its-opertaion/8742)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 28, 2020, 3:44pm UTC](https://forumautomation.com/t/what-will-happen-if-the-positioner-power-fails-in-pst-valve-during-its-opertaion/8742 "2020-10-28T15:44:50Z")

</div>

If the positioner power fail on a PST valve while the unit is in running condition and the valve is at fully open condition, what would happen will the valve close or stay in the same position?

---

## [Type of vibration measuring instrument is used on the compressors and the vibration measuring points](https://forumautomation.com/t/type-of-vibration-measuring-instrument-is-used-on-the-compressors-and-the-vibration-measuring-points/129)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 2:52pm UTC](https://forumautomation.com/t/type-of-vibration-measuring-instrument-is-used-on-the-compressors-and-the-vibration-measuring-points/129 "2014-10-03T14:52:59Z")

</div>

On a gas compressor shaft/bearing, measurement is carried out using a eddy probe displacement system. On each gas compressor, on both forward and aft radial bearings (journal bearing) two eddy probes are installed in the…

---

## [How to find the LRV, URV, & Span](https://forumautomation.com/t/how-to-find-the-lrv-urv-span/8806)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 11, 2020, 7:43am UTC](https://forumautomation.com/t/how-to-find-the-lrv-urv-span/8806 "2020-11-11T07:43:11Z")

</div>

LRV =? URV=? Span =? 60%=? mA

---

## [How to measure level by bubbler method?](https://forumautomation.com/t/how-to-measure-level-by-bubbler-method/8854)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [November 30, 2020, 12:59am UTC](https://forumautomation.com/t/how-to-measure-level-by-bubbler-method/8854 "2020-11-30T00:59:35Z")

</div>

Level measurement using bubbler method

---

## [What is a Device Description?](https://forumautomation.com/t/what-is-a-device-description/219)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 31, 2014, 6:06pm UTC](https://forumautomation.com/t/what-is-a-device-description/219 "2014-12-31T18:06:10Z")

</div>

Key to the HART Protocol’s ability to “get data out of the field device” is a data file called a Device Description (DD). This describes the features and functions of a device, such as the form and content of menus and g…

---

## [Type of orifice tapping is commonly used in P.D.O](https://forumautomation.com/t/type-of-orifice-tapping-is-commonly-used-in-p-d-o/72)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:03pm UTC](https://forumautomation.com/t/type-of-orifice-tapping-is-commonly-used-in-p-d-o/72 "2014-10-02T18:03:53Z")

</div>

PDO in general, is using the ‘Flange Tapping’. The upstream and downstream orifice tapping are taken from the flanges.

---

## [What to do with FMR52 radar level transmitter eco loss alert?](https://forumautomation.com/t/what-to-do-with-fmr52-radar-level-transmitter-eco-loss-alert/12228)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [June 27, 2024, 4:51pm UTC](https://forumautomation.com/t/what-to-do-with-fmr52-radar-level-transmitter-eco-loss-alert/12228 "2024-06-27T16:51:36Z")

</div>

When you receive an Eco Loss notice in a FMR52 radar level transmitter, take these actions to resolve the problem: Verify Installation Inspect Antenna Check Configuration Signal Strength Interference Diagnostics Ref…

---

## [What does an electronic valve controller do?](https://forumautomation.com/t/what-does-an-electronic-valve-controller-do/12813)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 13, 2024, 5:13pm UTC](https://forumautomation.com/t/what-does-an-electronic-valve-controller-do/12813 "2024-11-13T17:13:33Z")

</div>

What does an electronic valve controller do?

---

## [What is a photometer and for what purpose it is used for](https://forumautomation.com/t/what-is-a-photometer-and-for-what-purpose-it-is-used-for/7528)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [December 7, 2019, 3:17pm UTC](https://forumautomation.com/t/what-is-a-photometer-and-for-what-purpose-it-is-used-for/7528 "2019-12-07T15:17:00Z")

</div>

What is a photometer and for what purpose it is used for A photometer is a device that can be used to measure the intensity of light. It can measure the electromagnetic radiation strength, the amount of light passes t…

---

## [Instrument Calibration : Meaning of Traceability](https://forumautomation.com/t/instrument-calibration-meaning-of-traceability/306)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [March 10, 2015, 7:45pm UTC](https://forumautomation.com/t/instrument-calibration-meaning-of-traceability/306 "2015-03-10T19:45:52Z")

</div>

What is the meaning of Traceability ? Traceability refers to procedure and records that are used and kept to demonstrate that calibration made in a local laboratory accurately represent the quantities of interest Tracea…

---

## [What is the need for cold junction compensation in thermocouples](https://forumautomation.com/t/what-is-the-need-for-cold-junction-compensation-in-thermocouples/9215)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 4, 2021, 4:51am UTC](https://forumautomation.com/t/what-is-the-need-for-cold-junction-compensation-in-thermocouples/9215 "2021-03-04T04:51:14Z")

</div>

Explain the purpose of cold junction compensation in thermocouples

---

## [What is the main difference between SensorPROM and SensorFlash?](https://forumautomation.com/t/what-is-the-main-difference-between-sensorprom-and-sensorflash/12638)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 1, 2024, 5:13am UTC](https://forumautomation.com/t/what-is-the-main-difference-between-sensorprom-and-sensorflash/12638 "2024-10-01T05:13:00Z")

</div>

What is the main difference between SensorPROM and SensorFlash?

---

## [What are the different types of solenoid valves, and how do they differ in application?](https://forumautomation.com/t/what-are-the-different-types-of-solenoid-valves-and-how-do-they-differ-in-application/12821)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 20, 2024, 3:29pm UTC](https://forumautomation.com/t/what-are-the-different-types-of-solenoid-valves-and-how-do-they-differ-in-application/12821 "2024-11-20T15:29:59Z")

</div>

What are the different types of solenoid valves, and how do they differ in application?

---

## [Why should the accuracy of a master instrument be 4 times than the device under calibration?](https://forumautomation.com/t/why-should-the-accuracy-of-a-master-instrument-be-4-times-than-the-device-under-calibration/11702)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [January 10, 2024, 4:58pm UTC](https://forumautomation.com/t/why-should-the-accuracy-of-a-master-instrument-be-4-times-than-the-device-under-calibration/11702 "2024-01-10T16:58:05Z")

</div>

Why should the accuracy of a master instrument be 4 times than the device under calibration? The necessity for precise and reliable measurements in a variety of industries is the reason behind the requirement that t…

---

## [What is the purpose and advantages of cascade control loop?](https://forumautomation.com/t/what-is-the-purpose-and-advantages-of-cascade-control-loop/8878)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 28, 2020, 11:32am UTC](https://forumautomation.com/t/what-is-the-purpose-and-advantages-of-cascade-control-loop/8878 "2020-11-28T11:32:15Z")

</div>

Advantage of cascade control loop

---

## [Anti-surge valve](https://forumautomation.com/t/anti-surge-valve/4389)

<div class="topic-metadata">

**Author:** [@Engineer](https://forumautomation.com/u/Engineer)\
**Replies:** 0\
**Last updated:** [August 15, 2018, 12:59pm UTC](https://forumautomation.com/t/anti-surge-valve/4389 "2018-08-15T12:59:09Z")

</div>

Who has an idea about such designed valve?

---

## [What is a V ball valve?](https://forumautomation.com/t/what-is-a-v-ball-valve/10896)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [February 22, 2023, 4:44am UTC](https://forumautomation.com/t/what-is-a-v-ball-valve/10896 "2023-02-22T04:44:08Z")

</div>

What is a V ball valve? A control valve with a v-shaped ball or seal is known as a v-port ball valve. Better fluid management is made possible by the “v” form. The moulded v-bore sets the v-port ball valves apart from o…

---

## [How is a dry leg calibration different from a wet leg calibration](https://forumautomation.com/t/how-is-a-dry-leg-calibration-different-from-a-wet-leg-calibration/8784)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 5, 2020, 7:42am UTC](https://forumautomation.com/t/how-is-a-dry-leg-calibration-different-from-a-wet-leg-calibration/8784 "2020-11-05T07:42:38Z")

</div>

Explain dry leg calibration and wet leg calibration and how are they different

---

## [Can we use an Endress Hauser flowmeter for conductive fluids](https://forumautomation.com/t/can-we-use-an-endress-hauser-flowmeter-for-conductive-fluids/9370)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [May 4, 2021, 7:03am UTC](https://forumautomation.com/t/can-we-use-an-endress-hauser-flowmeter-for-conductive-fluids/9370 "2021-05-04T07:03:15Z")

</div>

Is it possible to use the hauser flow meter for conductive fluids

---

## [What is the difference between error and tolerance](https://forumautomation.com/t/what-is-the-difference-between-error-and-tolerance/9323)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 13, 2021, 7:35am UTC](https://forumautomation.com/t/what-is-the-difference-between-error-and-tolerance/9323 "2021-04-13T07:35:33Z")

</div>

Explain how error is different from tolerance

---

## [A pressure-relief valve has a pressure setting of 140 bar. Compute the kW loss across this valve if it returns all the flow back to the tank from a 0.0016 3 m / s pump](https://forumautomation.com/t/a-pressure-relief-valve-has-a-pressure-setting-of-140-bar-compute-the-kw-loss-across-this-valve-if-it-returns-all-the-flow-back-to-the-tank-from-a-0-0016-3-m-s-pump/12146)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [June 14, 2024, 4:35pm UTC](https://forumautomation.com/t/a-pressure-relief-valve-has-a-pressure-setting-of-140-bar-compute-the-kw-loss-across-this-valve-if-it-returns-all-the-flow-back-to-the-tank-from-a-0-0016-3-m-s-pump/12146 "2024-06-14T16:35:26Z")

</div>

A pressure-relief valve has a pressure setting of 140 bar. Compute the kW loss across this valve if it returns all the flow back to the tank from a 0.0016 3 m / s pump.

---

## [Why DP transmitter is used for close tank level measurement](https://forumautomation.com/t/why-dp-transmitter-is-used-for-close-tank-level-measurement/9400)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [May 14, 2021, 9:20am UTC](https://forumautomation.com/t/why-dp-transmitter-is-used-for-close-tank-level-measurement/9400 "2021-05-14T09:20:31Z")

</div>

Explain why do we use differential pressure transmitter for close tank level measurement

---

## [Resistance of an ‘Eddy probe’](https://forumautomation.com/t/resistance-of-an-eddy-probe/122)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 2:38pm UTC](https://forumautomation.com/t/resistance-of-an-eddy-probe/122 "2014-10-03T14:38:16Z")

</div>

An eddy probe resistance should be between 5-8 ohms.

---

## [Burnollious Theorem](https://forumautomation.com/t/burnollious-theorem/69)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:56pm UTC](https://forumautomation.com/t/burnollious-theorem/69 "2014-10-02T17:56:52Z")

</div>

It explains that when there is a restriction line a fluid flow line a ‘DP’ (differential pressure) is created. The DP is maximum at the veena contract point. The flow measured in the flow line is proportional to the squa…

---

## [What is an absolute pressure](https://forumautomation.com/t/what-is-an-absolute-pressure/9896)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 5, 2021, 5:04am UTC](https://forumautomation.com/t/what-is-an-absolute-pressure/9896 "2021-10-05T05:04:10Z")

</div>

Define absolute pressure

---

## [Can you put a DVC6200 on a Fisher D4 control valve?](https://forumautomation.com/t/can-you-put-a-dvc6200-on-a-fisher-d4-control-valve/12233)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 1\
**Last updated:** [July 5, 2024, 1:55pm UTC](https://forumautomation.com/t/can-you-put-a-dvc6200-on-a-fisher-d4-control-valve/12233 "2024-07-05T13:55:28Z")

</div>

Can you put a DVC6200 on a Fisher D4 control valve?

---

## [How does a cascade control loop work](https://forumautomation.com/t/how-does-a-cascade-control-loop-work/9147)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [February 9, 2021, 11:43am UTC](https://forumautomation.com/t/how-does-a-cascade-control-loop-work/9147 "2021-02-09T11:43:51Z")

</div>

Explain the operation of cascade control loop

---

## [Why do we need fieldbus monitor FBT 6](https://forumautomation.com/t/why-do-we-need-fieldbus-monitor-fbt-6/8788)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 6, 2020, 10:58am UTC](https://forumautomation.com/t/why-do-we-need-fieldbus-monitor-fbt-6/8788 "2020-11-06T10:58:56Z")

</div>

For what purpose do we use fieldbus monitor FBT -6

---

## [What are the effects of vibration?](https://forumautomation.com/t/what-are-the-effects-of-vibration/997)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [April 17, 2016, 4:52pm UTC](https://forumautomation.com/t/what-are-the-effects-of-vibration/997 "2016-04-17T16:52:21Z")

</div>

The effects of vibration are 1.Structural fatigue 2.Noise radiation 3.Improper operation 4.Performance inefficiency 5.Secondary damage

---

## [What is the voltage tolerance of 24VDC?](https://forumautomation.com/t/what-is-the-voltage-tolerance-of-24vdc/13395)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 26, 2025, 6:40am UTC](https://forumautomation.com/t/what-is-the-voltage-tolerance-of-24vdc/13395 "2025-07-26T06:40:53Z")

</div>

What is the voltage tolerance of 24VDC?

---

## [What is the difference between a gas analyzer and a gas detector?](https://forumautomation.com/t/what-is-the-difference-between-a-gas-analyzer-and-a-gas-detector/12221)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 3, 2024, 8:10am UTC](https://forumautomation.com/t/what-is-the-difference-between-a-gas-analyzer-and-a-gas-detector/12221 "2024-07-03T08:10:48Z")

</div>

What is the difference between a gas analyzer and a gas detector?

---

## [How to do maintenance on struck control valve?](https://forumautomation.com/t/how-to-do-maintenance-on-struck-control-valve/11808)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [February 21, 2024, 5:29pm UTC](https://forumautomation.com/t/how-to-do-maintenance-on-struck-control-valve/11808 "2024-02-21T17:29:41Z")

</div>

---

## [What are the supported inputs and outputs of FF positioner](https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 1\
**Last updated:** [October 30, 2020, 3:44pm UTC](https://forumautomation.com/t/what-are-the-supported-inputs-and-outputs-of-ff-positioner/8761 "2020-10-30T15:44:02Z")

</div>

Hart positioner supports 4-20mA input and 3-15 psi output then what about the FF positioner

---

## [What is the meaning of actuator 120 cm2 is it the actuator size](https://forumautomation.com/t/what-is-the-meaning-of-actuator-120-cm2-is-it-the-actuator-size/9214)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 3, 2021, 1:00pm UTC](https://forumautomation.com/t/what-is-the-meaning-of-actuator-120-cm2-is-it-the-actuator-size/9214 "2021-03-03T13:00:44Z")

</div>

Explain why it is labeled as 120 cm2 in the below image

---

## [What is the cheapest way to remotely monitor the field devices or instruments](https://forumautomation.com/t/what-is-the-cheapest-way-to-remotely-monitor-the-field-devices-or-instruments/9359)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [May 3, 2021, 7:15pm UTC](https://forumautomation.com/t/what-is-the-cheapest-way-to-remotely-monitor-the-field-devices-or-instruments/9359 "2021-05-03T19:15:41Z")

</div>

What is the cheapest way of remote monitoring of field devices or instruments,I want something that will enable me to view these devices from home, they all are using 40-20mA as an output and they have Ethernet Port

---

## [What’s the difference between a control valve actuator and a positioner, and why does it matter?](https://forumautomation.com/t/what-s-the-difference-between-a-control-valve-actuator-and-a-positioner-and-why-does-it-matter/13271)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [May 23, 2025, 7:06am UTC](https://forumautomation.com/t/what-s-the-difference-between-a-control-valve-actuator-and-a-positioner-and-why-does-it-matter/13271 "2025-05-23T07:06:52Z")

</div>

What’s the difference between a control valve actuator and a positioner, and why does it matter?

---

## [How do counters function in CODESYS?](https://forumautomation.com/t/how-do-counters-function-in-codesys/11879)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [March 18, 2024, 1:31pm UTC](https://forumautomation.com/t/how-do-counters-function-in-codesys/11879 "2024-03-18T13:31:34Z")

</div>

Counter instructions are utilized in PLC programming to record the number of times an event happens. The following is a brief description of how a CODESYS counter instruction functions: The CU input turns True & the Cou…

---

## [What is a Temperature Process Sensor?](https://forumautomation.com/t/what-is-a-temperature-process-sensor/11868)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [March 14, 2024, 2:16pm UTC](https://forumautomation.com/t/what-is-a-temperature-process-sensor/11868 "2024-03-14T14:16:24Z")

</div>

What is a Temperature Process Sensor? A temperature sensor electrically monitors the temperature of liquids, solids, and gases. Temperature-detecting devices may be touch or non-contact, and they use the converting of he…

---

## [What is Functional safety in industries?](https://forumautomation.com/t/what-is-functional-safety-in-industries/7307)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 19, 2019, 2:34pm UTC](https://forumautomation.com/t/what-is-functional-safety-in-industries/7307 "2019-10-19T14:34:37Z")

</div>

What is functional safety? Functional safety is the part of the overall protection that depends on the proper functioning of risk reduction of safety-related systems. These systems must perform their intended function…

---

## [How is a gauge pressure different from absolute pressure](https://forumautomation.com/t/how-is-a-gauge-pressure-different-from-absolute-pressure/8791)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 7, 2020, 4:23am UTC](https://forumautomation.com/t/how-is-a-gauge-pressure-different-from-absolute-pressure/8791 "2020-11-07T04:23:25Z")

</div>

What is the difference between gauge pressure and atmospheric pressure and how are they different from absolute pressure

---

## [What is a PID, and where is it used](https://forumautomation.com/t/what-is-a-pid-and-where-is-it-used/9340)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 21, 2021, 5:21am UTC](https://forumautomation.com/t/what-is-a-pid-and-where-is-it-used/9340 "2021-04-21T05:21:59Z")

</div>

Explain the PID and why do we need it

---

## [Can we do flow measurement by using DP type tx](https://forumautomation.com/t/can-we-do-flow-measurement-by-using-dp-type-tx/8739)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 28, 2020, 3:16pm UTC](https://forumautomation.com/t/can-we-do-flow-measurement-by-using-dp-type-tx/8739 "2020-10-28T15:16:54Z")

</div>

Is it possible to use a DP type flow tx as a mass flow meter in specific application?

---

## [What is an Integral Orifice?](https://forumautomation.com/t/what-is-an-integral-orifice/11908)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [March 26, 2024, 2:15pm UTC](https://forumautomation.com/t/what-is-an-integral-orifice/11908 "2024-03-26T14:15:08Z")

</div>

An integral orifice is a fundamental component of flow measurement systems that regulates and quantifies the flow of fluids, either liquid or gas. Unlike standard orifice plates, which are put separately in pipelines, i…

---

## [How often should a multi gas detector be calibrated?](https://forumautomation.com/t/how-often-should-a-multi-gas-detector-be-calibrated/12252)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 8, 2024, 5:09pm UTC](https://forumautomation.com/t/how-often-should-a-multi-gas-detector-be-calibrated/12252 "2024-07-08T17:09:42Z")

</div>

How often should a multi gas detector be calibrated?

---

## [What is the need for main fold valves with a DP gauge transmitter](https://forumautomation.com/t/what-is-the-need-for-main-fold-valves-with-a-dp-gauge-transmitter/8911)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 5, 2020, 10:05am UTC](https://forumautomation.com/t/what-is-the-need-for-main-fold-valves-with-a-dp-gauge-transmitter/8911 "2020-12-05T10:05:18Z")

</div>

Why do we need to install such type of manifold with DP Gauge transmitter?

---

## [What is a burner Management System?](https://forumautomation.com/t/what-is-a-burner-management-system/9287)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 29, 2021, 4:06am UTC](https://forumautomation.com/t/what-is-a-burner-management-system/9287 "2021-03-29T04:06:13Z")

</div>

Explain the burner management system

---

## [How to find errors in transmitters and in gauges](https://forumautomation.com/t/how-to-find-errors-in-transmitters-and-in-gauges/8840)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 21, 2020, 5:21am UTC](https://forumautomation.com/t/how-to-find-errors-in-transmitters-and-in-gauges/8840 "2020-11-21T05:21:35Z")

</div>

Error checking in transmitters and in gauges

---

## [Why do we use compensating cable for thermocouple?](https://forumautomation.com/t/why-do-we-use-compensating-cable-for-thermocouple/13036)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [February 27, 2025, 9:59am UTC](https://forumautomation.com/t/why-do-we-use-compensating-cable-for-thermocouple/13036 "2025-02-27T09:59:45Z")

</div>

Why do we use compensating cable for thermocouple?

---

## [Why is a coriolis flow meter used instead of a volumetric flowmeter?](https://forumautomation.com/t/why-is-a-coriolis-flow-meter-used-instead-of-a-volumetric-flowmeter/12279)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 17, 2024, 8:39am UTC](https://forumautomation.com/t/why-is-a-coriolis-flow-meter-used-instead-of-a-volumetric-flowmeter/12279 "2024-07-17T08:39:36Z")

</div>

Why is a coriolis flow meter used instead of a volumetric flowmeter?

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=23&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=25&per_page=50)
