# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=2

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 3

---

## [What are the different types of flow elements? Advantages and Disadvantages of various type of flow element](https://forumautomation.com/t/what-are-the-different-types-of-flow-elements-advantages-and-disadvantages-of-various-type-of-flow-element/2197)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [August 13, 2017, 9:18pm UTC](https://forumautomation.com/t/what-are-the-different-types-of-flow-elements-advantages-and-disadvantages-of-various-type-of-flow-element/2197 "2017-08-13T21:18:10Z")

</div>

Different type of Flow element 1.Differential Pressure Orifice plate Pitot Venturi Advantages - Simple,No moving parts. Disadvantages - Susceptible to wear in dirty services except vertically. Orifice edge sharpness …

---

## [Pre commissioning Tests for process loop](https://forumautomation.com/t/pre-commissioning-tests-for-process-loop/6157)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 28, 2019, 6:54pm UTC](https://forumautomation.com/t/pre-commissioning-tests-for-process-loop/6157 "2019-03-28T18:54:10Z")

</div>

Pre-commissioning: The completed instrument installation must be fully tested to ensure that the equipment is in full operating order before starting a new installation. This test normally falls into three phases, i.e…

---

## [Thermal mass flowmeter](https://forumautomation.com/t/thermal-mass-flowmeter/3043)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 27, 2018, 8:08pm UTC](https://forumautomation.com/t/thermal-mass-flowmeter/3043 "2018-01-27T20:08:24Z")

</div>

Principle: Thermal mass flow meters are most commonly used for measuring the flow of gases, which is operated by the cooling effect of the gases stream. The operating principle is based on conductive and convective he…

---

## [What is dry calibration and wet calibration and how to do this?](https://forumautomation.com/t/what-is-dry-calibration-and-wet-calibration-and-how-to-do-this/160)

<div class="topic-metadata">

**Author:** [@instrulover](https://forumautomation.com/u/instrulover)\
**Replies:** 1\
**Last updated:** [November 28, 2014, 2:54am UTC](https://forumautomation.com/t/what-is-dry-calibration-and-wet-calibration-and-how-to-do-this/160 "2014-11-28T02:54:42Z")

</div>

dry calibration and wet calibration and how to do this?

---

## [What is pressure gauge siphon?](https://forumautomation.com/t/what-is-pressure-gauge-siphon/7678)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 5\
**Last updated:** [December 28, 2020, 12:32pm UTC](https://forumautomation.com/t/what-is-pressure-gauge-siphon/7678 "2020-12-28T12:32:31Z")

</div>

What is a pressure gauge siphon? Pressure gauge siphons are used to protect the pressure gage from the effect of hot pressure media, such as steam and also, which threaten the effect of rapid pressure surges. The pressur…

---

## [Positive Displacement flowmeters](https://forumautomation.com/t/positive-displacement-flowmeters/3004)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 19, 2018, 6:10pm UTC](https://forumautomation.com/t/positive-displacement-flowmeters/3004 "2018-01-19T18:10:46Z")

</div>

Positive Displacement (PD) flowmeters are types volumetric flow meters. PD flowmeters work in a cyclic process, in each cyclic precisely defined (“positive”) quantity of fluid is entrapped in its chamber using a mechanic…

---

## [How to calibrate Differential Pressure Transmitter (DPT) Level Transmitter at field?](https://forumautomation.com/t/how-to-calibrate-differential-pressure-transmitter-dpt-level-transmitter-at-field/6528)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 11, 2019, 5:01pm UTC](https://forumautomation.com/t/how-to-calibrate-differential-pressure-transmitter-dpt-level-transmitter-at-field/6528 "2019-06-11T17:01:50Z")

</div>

Equipment required: Datasheet, Pressure calibrator, Multimeter, Hart communicator Procedure of DP Level Transmitter Calibration at field: Man placed the computer in the control circuit manual mode and…

---

## [What is the difference between range and span?](https://forumautomation.com/t/what-is-the-difference-between-range-and-span/10368)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 20, 2022, 4:36am UTC](https://forumautomation.com/t/what-is-the-difference-between-range-and-span/10368 "2022-04-20T04:36:41Z")

</div>

Explain how range is different from span

---

## [What is strainers and installation of strainer?](https://forumautomation.com/t/what-is-strainers-and-installation-of-strainer/6419)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [June 7, 2019, 4:24pm UTC](https://forumautomation.com/t/what-is-strainers-and-installation-of-strainer/6419 "2019-06-07T16:24:05Z")

</div>

What is strainer? Strainers are important components of piping systems to protect equipment from harm caused by dust and other objects that the process liquid can carry. Simply strainers are kind of filter that is in…

---

## [Instrumentation standards & codes](https://forumautomation.com/t/instrumentation-standards-codes/146)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [October 22, 2014, 10:41pm UTC](https://forumautomation.com/t/instrumentation-standards-codes/146 "2014-10-22T22:41:56Z")

</div>

STANDARD DESCRIPTION ISA INSTRUMENT SOCIETY OF AMERICA ANSI American National Standards Institute BS British Standard API AMERICAN PETROLEUM INSTITUTE IEC INTERNATIONAL ELECTROTECHNICAL COM…

---

## [What is a Chart Recorder? What is the function of Strip Chart Recorder?](https://forumautomation.com/t/what-is-a-chart-recorder-what-is-the-function-of-strip-chart-recorder/5111)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 5, 2018, 2:46am UTC](https://forumautomation.com/t/what-is-a-chart-recorder-what-is-the-function-of-strip-chart-recorder/5111 "2018-11-05T02:46:13Z")

</div>

What is Recorder? A recorder is a device for data logging. These are electromechanical devices that plot the electrical or mechanical input data onto a chart . They can plot more than one input at a time and inputs are…

---

## [What is a Transducer? Classifications of transducers:](https://forumautomation.com/t/what-is-a-transducer-classifications-of-transducers/8035)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 16, 2020, 9:05pm UTC](https://forumautomation.com/t/what-is-a-transducer-classifications-of-transducers/8035 "2020-03-16T21:05:39Z")

</div>

What is a Transducer? A transducer is a device that senses a physical parameter and converts it into a measurable form. Simply we can say that it is a device capable of converting physical quantity into a proportiona…

---

## [What is LRV and URV ? How to obtain LRV & URV for Level measurment using Differential pressure transmitter?](https://forumautomation.com/t/what-is-lrv-and-urv-how-to-obtain-lrv-urv-for-level-measurment-using-differential-pressure-transmitter/2396)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 6, 2017, 7:04pm UTC](https://forumautomation.com/t/what-is-lrv-and-urv-how-to-obtain-lrv-urv-for-level-measurment-using-differential-pressure-transmitter/2396 "2017-10-06T19:04:30Z")

</div>

LRV or lower range value and URV or upper range value are the two important values we should care, while measuring level using differential pressure transmitter Case 1: Here in the above diagram the differential le…

---

## [Thermocouple Transducer | How to costruct a Thermocouple device at home?](https://forumautomation.com/t/thermocouple-transducer-how-to-costruct-a-thermocouple-device-at-home/2362)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 30, 2017, 1:51pm UTC](https://forumautomation.com/t/thermocouple-transducer-how-to-costruct-a-thermocouple-device-at-home/2362 "2017-09-30T13:51:15Z")

</div>

A thermoelectric transducer is an active transducers, which doesn’t need any auxiliary power sources for it’s working. A thermocouple converts thermal energy into EMF. Thermocouple is simply made by joining two dissim…

---

## [Basics of Reluctive Pressure Transducers?](https://forumautomation.com/t/basics-of-reluctive-pressure-transducers/1614)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 2, 2017, 5:32am UTC](https://forumautomation.com/t/basics-of-reluctive-pressure-transducers/1614 "2017-01-02T05:32:13Z")

</div>

Reluctive Pressure Transducer A reluctive pressure transducer is a pressure transducer that works by changing the reluctance between two coils.These device measures pressures ranging from less than 10 psi to more than 1…

---

## [Cable routing, Cable conduits and cable trays](https://forumautomation.com/t/cable-routing-cable-conduits-and-cable-trays/5369)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [December 3, 2018, 11:50am UTC](https://forumautomation.com/t/cable-routing-cable-conduits-and-cable-trays/5369 "2018-12-03T11:50:13Z")

</div>

Cable Routing Electrical cables must be adequately supported to relieve mechanical stresses in conductors and be protected from adverse conditions, such as abrasion, which could degrade the insulation. A traditional and …

---

## [Emergency shutdown valve](https://forumautomation.com/t/emergency-shutdown-valve/4517)

<div class="topic-metadata">

**Author:** [@rajeena](https://forumautomation.com/u/rajeena)\
**Replies:** 3\
**Last updated:** [December 7, 2023, 4:21am UTC](https://forumautomation.com/t/emergency-shutdown-valve/4517 "2023-12-07T04:21:38Z")

</div>

What is Emergency shutdown valve? The function of the shutdown valve is to shut-off the fluid flow inside the fluid flow line or pipe when an emergency that leads to a hazardous situation comes. It is an actuator operate…

---

## [Wallace & Tiernan pneumatic calibrator](https://forumautomation.com/t/wallace-tiernan-pneumatic-calibrator/2465)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 17, 2017, 11:42am UTC](https://forumautomation.com/t/wallace-tiernan-pneumatic-calibrator/2465 "2017-10-17T11:42:32Z")

</div>

There are many calibrators can be used to calibrate pressure gauges. But a Wallace & Tiernan pneumatic calibrators is portable and can be used for the calibration both pressure gauges and pressure transmitter. A pressure…

---

## [Advantages and Disadvantages of Vortex Flow meters](https://forumautomation.com/t/advantages-and-disadvantages-of-vortex-flow-meters/268)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 2\
**Last updated:** [May 13, 2025, 12:21am UTC](https://forumautomation.com/t/advantages-and-disadvantages-of-vortex-flow-meters/268 "2025-05-13T00:21:55Z")

</div>

Advantages of Vortex meters 1 .Wide rangeability (for Reynolds numbers above l0,OOO). 2. An accuracy of 1 percent of rate. 3.A wide range of sizes. 4. Linear output. 5. Availability of pulse and analog outputs. Limitat…

---

## [What is cavitation and Flashing? What cause cavitation?](https://forumautomation.com/t/what-is-cavitation-and-flashing-what-cause-cavitation/6977)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [August 16, 2019, 6:05pm UTC](https://forumautomation.com/t/what-is-cavitation-and-flashing-what-cause-cavitation/6977 "2019-08-16T18:05:31Z")

</div>

Cavitation and flashing occur where there is an orifice in the pipeline because of any kind of obstructions such as valves & flowmeters. Thus such phenomenons can appear in any types of flow arrangements, here we try to …

---

## [Elastic diaphragm gauges](https://forumautomation.com/t/elastic-diaphragm-gauges/5890)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 9, 2019, 5:58pm UTC](https://forumautomation.com/t/elastic-diaphragm-gauges/5890 "2019-02-09T17:58:48Z")

</div>

Elastic diaphragm gauge is a pressure measurement device, which works under the principle When an elastic transducer (diaphragm) is subjected to a pressure, it deviates. This deviation is proportional to the pressure app…

---

## [Calibration of pressure measuring instruments](https://forumautomation.com/t/calibration-of-pressure-measuring-instruments/4995)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 23, 2018, 5:05pm UTC](https://forumautomation.com/t/calibration-of-pressure-measuring-instruments/4995 "2018-10-23T17:05:03Z")

</div>

Pressure instrument calibration is the process of adjusting the instrument’s output signal to match a known range of pressures. Proper calibration provides the desired beginning and ending pressures, and produces an o…

---

## [What are the different electrical methods of pressure measurement?](https://forumautomation.com/t/what-are-the-different-electrical-methods-of-pressure-measurement/2488)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 21, 2017, 3:37pm UTC](https://forumautomation.com/t/what-are-the-different-electrical-methods-of-pressure-measurement/2488 "2017-10-21T15:37:54Z")

</div>

Electrical methods for measurement systems are cheaper and accurate compared to old mechanical methods. Electrical transducers can be calibrated and replaced easily. Piezoelectric method: A piezoelectric material is one…

---

## [Thermowell Placement Perfection: Best Practices Guide](https://forumautomation.com/t/thermowell-placement-perfection-best-practices-guide/11469)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [September 12, 2023, 2:33am UTC](https://forumautomation.com/t/thermowell-placement-perfection-best-practices-guide/11469 "2023-09-12T02:33:09Z")

</div>

The precise installation of a thermowell is critical for accurate temperature measurement and the protection of both the sensor and the process. Thermowells are often used to protect temperature sensors from harsh proces…

---

## [Basics of Coriolis Flow measurement?](https://forumautomation.com/t/basics-of-coriolis-flow-measurement/1715)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 29, 2017, 5:27pm UTC](https://forumautomation.com/t/basics-of-coriolis-flow-measurement/1715 "2017-01-29T17:27:37Z")

</div>

Coriolis Flow Measurement Operating Principle - The operating principle of Coriolis flow mass flow meter is based on the force exerted by the Coriolis acceleration of a fluid. Construction of Coriolis Flow meter - Th…

---

## [Comparison between temperature measuring devices](https://forumautomation.com/t/comparison-between-temperature-measuring-devices/3390)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 9, 2018, 11:48am UTC](https://forumautomation.com/t/comparison-between-temperature-measuring-devices/3390 "2018-04-09T11:48:55Z")

</div>

The four most common temperature transducers are thermocouples, resistance-temperature detector’s (RTD’s), thermistors, and integrated circuit sensors. Here we are discussing about advantages and disadvantages of each d…

---

## [How to reduce noise in thermocouple installation?](https://forumautomation.com/t/how-to-reduce-noise-in-thermocouple-installation/7079)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 3, 2019, 6:28pm UTC](https://forumautomation.com/t/how-to-reduce-noise-in-thermocouple-installation/7079 "2019-09-03T18:28:29Z")

</div>

Two distinct metal alloys are joined together to form a thermocouple at a stage called a junction. This junction is called the hot junction or measurement. The leads of the thermocouple are generally connected to an indi…

---

## [Basics of Control Valves and Parts of Control Valve](https://forumautomation.com/t/basics-of-control-valves-and-parts-of-control-valve/392)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [April 12, 2015, 2:27am UTC](https://forumautomation.com/t/basics-of-control-valves-and-parts-of-control-valve/392 "2015-04-12T02:27:28Z")

</div>

Control valve is a Final control element .Final control elements are necessary to control the Process variable. Valves are used to control the flow of fluid in process system. Main parts of Control valve are Valve Body …

---

## [What is Pre-Commissioning ? Pre-Commissioning Checklist](https://forumautomation.com/t/what-is-pre-commissioning-pre-commissioning-checklist/7621)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [March 15, 2022, 10:28am UTC](https://forumautomation.com/t/what-is-pre-commissioning-pre-commissioning-checklist/7621 "2022-03-15T10:28:22Z")

</div>

\[color=#ff0000\]\[size=5\]What is Pre-commissioning?\[/size\]\[/color\] Pre-commissioning (PC) is a construction procedure that includes checking the functional operability of elements within the system in order to ensure t…

---

## [Function of a hair –spring in a pressure gauge](https://forumautomation.com/t/function-of-a-hair-spring-in-a-pressure-gauge/51)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:30pm UTC](https://forumautomation.com/t/function-of-a-hair-spring-in-a-pressure-gauge/51 "2014-10-02T17:30:03Z")

</div>

Hair – spring in a pressure gage eliminates the Hysterisis (backlash/angularity) error caused in the quadrant (gear and pinion mechanism) and the weight of the pointer.

---

## [How to calibrate a Pressure gauge ( Pressure instrument calibration procedure)](https://forumautomation.com/t/how-to-calibrate-a-pressure-gauge-pressure-instrument-calibration-procedure/435)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [May 28, 2015, 1:55am UTC](https://forumautomation.com/t/how-to-calibrate-a-pressure-gauge-pressure-instrument-calibration-procedure/435 "2015-05-28T01:55:20Z")

</div>

Calibration procedure of Pressure Gauge Apparatus required - Master Gauge Pressure Pump Other materials : Data sheet Calibration report 1.Filling the liquid reservoir Open the liquid reservoir and fill with water…

---

## [pH meter, Construction, advantages](https://forumautomation.com/t/ph-meter-construction-advantages/5438)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [March 4, 2024, 11:43am UTC](https://forumautomation.com/t/ph-meter-construction-advantages/5438 "2024-03-04T11:43:54Z")

</div>

What is pH? The pH (hydrogen ion potential) of a solution is defined as pH = - log10 (H +), where (H +) is the concentration of hydrogen ion. The pH scale (of the hydrogen potential) is the logarithm of the reciprocal of…

---

## [What are load cells, types, classifications, calibration](https://forumautomation.com/t/what-are-load-cells-types-classifications-calibration/5110)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 4, 2018, 11:51pm UTC](https://forumautomation.com/t/what-are-load-cells-types-classifications-calibration/5110 "2018-11-04T23:51:52Z")

</div>

Pressure , weight or force can be measured using a load cell which converts the mechanical force into electrical signal. Types of Load Cell 1.On Capacity: They have a wide range of applications and depending on the capa…

---

## [Thermometer calibration using temperature bath - Advantages of temperature bath](https://forumautomation.com/t/thermometer-calibration-using-temperature-bath-advantages-of-temperature-bath/6307)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 27, 2019, 5:46pm UTC](https://forumautomation.com/t/thermometer-calibration-using-temperature-bath-advantages-of-temperature-bath/6307 "2019-04-27T17:46:35Z")

</div>

The thermometer can be calibrated using a comparison method using temperature baths. Temperature measuring devices are dipped in the temperature bath along with reference thermometer and they are compared. The power …

---

## [Intsrument index - Download free template](https://forumautomation.com/t/intsrument-index-download-free-template/5852)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [June 13, 2020, 1:47pm UTC](https://forumautomation.com/t/intsrument-index-download-free-template/5852 "2020-06-13T13:47:20Z")

</div>

What is an instrument index? Instrument index is a document that is created at the beginning of the project, which contains the list of instruments used in the plant. Name of the instruments is listed along with the Labl…

---

## [Thermocouple Circuit Considerations](https://forumautomation.com/t/thermocouple-circuit-considerations/6233)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 10, 2019, 8:08pm UTC](https://forumautomation.com/t/thermocouple-circuit-considerations/6233 "2019-04-10T20:08:27Z")

</div>

A circuit of thermocouples is like any other circuit of electricity. There is one or more EMF sources that can be batteries, a generator, or the hot and cold junctions in this case. There is a load, the indicator, and to…

---

## [What is three valve manifold? | how a 3 valve manifold works?](https://forumautomation.com/t/what-is-three-valve-manifold-how-a-3-valve-manifold-works/2482)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 2\
**Last updated:** [October 21, 2017, 8:09am UTC](https://forumautomation.com/t/what-is-three-valve-manifold-how-a-3-valve-manifold-works/2482 "2017-10-21T08:09:41Z")

</div>

Differential pressure transmitters are used in level measurement and flow measurement. For ensuring the protection of pressure transmitter or for isolating the transmitter from the process loop, manifolds are used. Th…

---

## [What is zero stability on a Coriolis flow meter? How to do zero calibration check of Coriolis flow meters?](https://forumautomation.com/t/what-is-zero-stability-on-a-coriolis-flow-meter-how-to-do-zero-calibration-check-of-coriolis-flow-meters/11456)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [September 6, 2023, 7:37am UTC](https://forumautomation.com/t/what-is-zero-stability-on-a-coriolis-flow-meter-how-to-do-zero-calibration-check-of-coriolis-flow-meters/11456 "2023-09-06T07:37:02Z")

</div>

What is zero stability on a Coriolis flow meter? The calibration accuracy of a Coriolis mass flow meter can be compared to the zero stability. The flow meter is filled with liquid and this normally automated process …

---

## [What is a lux meter and how does it work](https://forumautomation.com/t/what-is-a-lux-meter-and-how-does-it-work/7498)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [December 2, 2019, 1:35pm UTC](https://forumautomation.com/t/what-is-a-lux-meter-and-how-does-it-work/7498 "2019-12-02T13:35:07Z")

</div>

What is a Lux meter A lux meter is also called a light meter, it is a device which is used to measure the brightness. The lux meter measures the brightness specifically with the intensity by which the brightness appears…

---

## [Level Measurement DP type erratic behavior](https://forumautomation.com/t/level-measurement-dp-type-erratic-behavior/1578)

<div class="topic-metadata">

**Author:** [@Cheetha](https://forumautomation.com/u/Cheetha)\
**Replies:** 7\
**Last updated:** [January 15, 2017, 10:34pm UTC](https://forumautomation.com/t/level-measurement-dp-type-erratic-behavior/1578 "2017-01-15T22:34:08Z")

</div>

Hi, We are using diaphragm type Differential Pressure transmitters for level measurement of different vessels. Each vessel consists of two transmitters one with PLC loop (HIMA with current isolator card CS4/420) {let nam…

---

## [Working of Leveltrol](https://forumautomation.com/t/working-of-leveltrol/60)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:44pm UTC](https://forumautomation.com/t/working-of-leveltrol/60 "2014-10-02T17:44:09Z")

</div>

A Leveltrol in and instrument used for measuring the liquid level between two known points. The Leveltrol works on the buoyancy principal. Leveltrol has a float, which submerses proportionately with liquid level raise in…

---

## [How to decide LRV and URV of Flow transmitter (differential pressure transmitter)](https://forumautomation.com/t/how-to-decide-lrv-and-urv-of-flow-transmitter-differential-pressure-transmitter/1208)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 3\
**Last updated:** [August 8, 2016, 5:28am UTC](https://forumautomation.com/t/how-to-decide-lrv-and-urv-of-flow-transmitter-differential-pressure-transmitter/1208 "2016-08-08T05:28:36Z")

</div>

in specification of DPT LRL is 0 inH2O and URL is 500in H2O, how to decide lrv and urv , we use orifice for creating DP, maximum dp created when gas flow is about 200 inH2O but not fixed it may differ time to time, flow …

---

## [Pressure and types of pressure](https://forumautomation.com/t/pressure-and-types-of-pressure/3770)

<div class="topic-metadata">

**Author:** [@AbhimanyuMWarrier](https://forumautomation.com/u/AbhimanyuMWarrier)\
**Replies:** 0\
**Last updated:** [June 3, 2018, 9:41am UTC](https://forumautomation.com/t/pressure-and-types-of-pressure/3770 "2018-06-03T09:41:15Z")

</div>

PRESSURE Pressure is force per unit area applied in a direction perpendicular to the surface of an object. Pressure is measured in any unit of force divided by any unit of area. The SI unit of pressure is (the Newton …

---

## [What is GK or GKL value for magnetic-flow meter?](https://forumautomation.com/t/what-is-gk-or-gkl-value-for-magnetic-flow-meter/9155)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 3\
**Last updated:** [November 13, 2024, 8:03am UTC](https://forumautomation.com/t/what-is-gk-or-gkl-value-for-magnetic-flow-meter/9155 "2024-11-13T08:03:47Z")

</div>

Explain the GKL value of a magnetic flow meter

---

## [Working of Self-operated valve](https://forumautomation.com/t/working-of-self-operated-valve/2721)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 25, 2017, 8:18pm UTC](https://forumautomation.com/t/working-of-self-operated-valve/2721 "2017-11-25T20:18:39Z")

</div>

A “control valve” works to restrict the flow of fluid through a pipe at the command of a remotely sourced signal, such as the signal from a loop controller or logic device. A self-operated valve regulates the flow by its…

---

## [How to select correct thermowell for temperature measurement application?](https://forumautomation.com/t/how-to-select-correct-thermowell-for-temperature-measurement-application/952)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [April 2, 2016, 3:54am UTC](https://forumautomation.com/t/how-to-select-correct-thermowell-for-temperature-measurement-application/952 "2016-04-02T03:54:23Z")

</div>

Selection Of Thermowell You need to find out answers for 3 questions for selecting correct thermowell . 1.What type of connection you are making to the process ? Most common type of thermowell connections are a)Thre…

---

## [Difference between bonded and Unbonded Strain Gauge](https://forumautomation.com/t/difference-between-bonded-and-unbonded-strain-gauge/4091)

<div class="topic-metadata">

**Author:** [@areejsidhik](https://forumautomation.com/u/areejsidhik)\
**Replies:** 0\
**Last updated:** [July 13, 2018, 5:47am UTC](https://forumautomation.com/t/difference-between-bonded-and-unbonded-strain-gauge/4091 "2018-07-13T05:47:15Z")

</div>

We will discuss about the Difference between bonded and Unbonded Strain Gauge in this session before that lets look in to the working principle of strain gauges Principle of Measurement Several types of strain gauges …

---

## [What are the different types of valves?](https://forumautomation.com/t/what-are-the-different-types-of-valves/2478)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 19, 2017, 8:20pm UTC](https://forumautomation.com/t/what-are-the-different-types-of-valves/2478 "2017-10-19T20:20:42Z")

</div>

Valves are devices used to control the flow of a fluid stream. There are different kinds of valves used in plants based on the needs. Basically, Valves can be grouped into two main types: Shut off valves: They are ON…

---

## [Identification of Pipe Line Number in P&ID](https://forumautomation.com/t/identification-of-pipe-line-number-in-p-id/10658)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [September 20, 2022, 3:39am UTC](https://forumautomation.com/t/identification-of-pipe-line-number-in-p-id/10658 "2022-09-20T03:39:30Z")

</div>

The P&ID plays a very important role in the operation, maintenance, and modification or expansion of every process industry and power plant. The P&ID demonstrates the physical sequence of each and every piece of equ…

---

## [Strain gauge - principle, types, advantages, applications](https://forumautomation.com/t/strain-gauge-principle-types-advantages-applications/4949)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [October 17, 2018, 7:34pm UTC](https://forumautomation.com/t/strain-gauge-principle-types-advantages-applications/4949 "2018-10-17T19:34:41Z")

</div>

Strain gauges are resistance based passive electrical transducers that work on piezoresistive effect. Principle: Resistance of a strained wire is more than the resistance of a un-strained wire of same dimensions. In ot…

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=1&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=3&per_page=50)
