# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=19

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 20

---

## [How to calculate LRV, URV dp transmitter in an open tank](https://forumautomation.com/t/how-to-calculate-lrv-urv-dp-transmitter-in-an-open-tank/9310)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 8, 2021, 12:41pm UTC](https://forumautomation.com/t/how-to-calculate-lrv-urv-dp-transmitter-in-an-open-tank/9310 "2021-04-08T12:41:08Z")

</div>

Describe the calculation of LRV and URV of dp transmitter in open tank… Tank Height 17400 mm Specific gravity 1.89

---

## [Which instrument is this and why is it constructed in this manner](https://forumautomation.com/t/which-instrument-is-this-and-why-is-it-constructed-in-this-manner/8824)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [November 18, 2020, 12:28am UTC](https://forumautomation.com/t/which-instrument-is-this-and-why-is-it-constructed-in-this-manner/8824 "2020-11-18T00:28:58Z")

</div>

Why is this instrument constructed like this and for what purpose it is used

---

## [Which valves are used to control gas flow system?](https://forumautomation.com/t/which-valves-are-used-to-control-gas-flow-system/10942)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [March 7, 2023, 4:34am UTC](https://forumautomation.com/t/which-valves-are-used-to-control-gas-flow-system/10942 "2023-03-07T04:34:25Z")

</div>

Maintaining the flow of oil and gas through pipelines is a difficult undertaking that requires for a variety of dependable equipment. One of these essential components is a gas valve. The oil and gas sector could not …

---

## [How can temperature effects be mitigated in differential pressure level measurements?](https://forumautomation.com/t/how-can-temperature-effects-be-mitigated-in-differential-pressure-level-measurements/12130)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [June 6, 2024, 1:48am UTC](https://forumautomation.com/t/how-can-temperature-effects-be-mitigated-in-differential-pressure-level-measurements/12130 "2024-06-06T01:48:17Z")

</div>

How can temperature effects be mitigated in differential pressure level measurements?

---

## [Sound measurement technique](https://forumautomation.com/t/sound-measurement-technique/3551)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [May 2, 2018, 5:30pm UTC](https://forumautomation.com/t/sound-measurement-technique/3551 "2018-05-02T17:30:11Z")

</div>

Sound and its measurement are important since it relates to the sense of hearing, as well as many industrial applications, such as for the detection of flaws in solids, and for location and linear distance measurement. S…

---

## [What are the 3 most common control valve flow characteristics?](https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 8, 2025, 3:50am UTC](https://forumautomation.com/t/what-are-the-3-most-common-control-valve-flow-characteristics/12918 "2025-01-08T03:50:59Z")

</div>

What are the 3 most common control valve flow characteristics?

---

## [Fahrenheit to Centigrade temperature conversion formula](https://forumautomation.com/t/fahrenheit-to-centigrade-temperature-conversion-formula/83)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:19pm UTC](https://forumautomation.com/t/fahrenheit-to-centigrade-temperature-conversion-formula/83 "2014-10-02T18:19:30Z")

</div>

Deg C = ( Deg F – 32 ) / 1.8

---

## [Why is control valve outlet velocity important, and what are the recommended limits?](https://forumautomation.com/t/why-is-control-valve-outlet-velocity-important-and-what-are-the-recommended-limits/13270)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [May 23, 2025, 6:56am UTC](https://forumautomation.com/t/why-is-control-valve-outlet-velocity-important-and-what-are-the-recommended-limits/13270 "2025-05-23T06:56:56Z")

</div>

Why is control valve outlet velocity important, and what are the recommended limits?

---

## [What Are the Types of Gas Detectors?](https://forumautomation.com/t/what-are-the-types-of-gas-detectors/11428)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [August 24, 2023, 8:05am UTC](https://forumautomation.com/t/what-are-the-types-of-gas-detectors/11428 "2023-08-24T08:05:37Z")

</div>

Gas detectors are critical safety equipment that detect the presence of potentially dangerous gases in a variety of situations, particularly in process industries where gas leaks are a problem. Gas detectors of vario…

---

## [How to do the configuration of DP type flow meter in FF](https://forumautomation.com/t/how-to-do-the-configuration-of-dp-type-flow-meter-in-ff/9192)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [March 25, 2021, 2:29pm UTC](https://forumautomation.com/t/how-to-do-the-configuration-of-dp-type-flow-meter-in-ff/9192 "2021-03-25T14:29:18Z")

</div>

Explain how to configure the DP flow meter in FF

---

## [Drilling in petroleum industry, Drilling components, Drilling process](https://forumautomation.com/t/drilling-in-petroleum-industry-drilling-components-drilling-process/4981)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 22, 2018, 2:25pm UTC](https://forumautomation.com/t/drilling-in-petroleum-industry-drilling-components-drilling-process/4981 "2018-10-22T14:25:29Z")

</div>

Drilling is the first stage in the extraction of crude oil from the underground reservoir. Often many wells (called multilateral wells) are drilled into the same reservoir, to ensure that the extraction rate is economica…

---

## [Control valve parts](https://forumautomation.com/t/control-valve-parts/111)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 1:47pm UTC](https://forumautomation.com/t/control-valve-parts/111 "2014-10-03T13:47:18Z")

</div>

a) Trim b) CV c) Actuator d) Stem travel e) Valve body f) Yoke g) Gland packing Trim : Trim is a matched pair of ‘plug’ and ‘seat’ CV : The amount of water flow in gallons through the control valve when the valve port …

---

## [How to troubleshoot a pH measurement problem?](https://forumautomation.com/t/how-to-troubleshoot-a-ph-measurement-problem/1287)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [August 28, 2016, 3:52am UTC](https://forumautomation.com/t/how-to-troubleshoot-a-ph-measurement-problem/1287 "2016-08-28T03:52:35Z")

</div>

Troubleshooting techniques for pH measurement. 1.Measuring electrode can be bad. Glass electrodes age with time,causing a slowed reaction to pH change. Glass electrode can be broken or have small holes in them,usually…

---

## [Difference between sensor trim and output trim](https://forumautomation.com/t/difference-between-sensor-trim-and-output-trim/9004)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 24, 2020, 1:39pm UTC](https://forumautomation.com/t/difference-between-sensor-trim-and-output-trim/9004 "2020-12-24T13:39:39Z")

</div>

What is the difference between sensor trim and output trim

---

## [What are the conditions affecting liquid pressure?](https://forumautomation.com/t/what-are-the-conditions-affecting-liquid-pressure/1660)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 15, 2017, 5:07am UTC](https://forumautomation.com/t/what-are-the-conditions-affecting-liquid-pressure/1660 "2017-01-15T05:07:48Z")

</div>

If the liquid in a tank remains at rest,the pressure at any location beneath the surface depends on only three conditions. 1.Surface pressure - Any pressure acting on the surface is transmitted throughout the liquid and…

---

## [How to select correct temperature sensor?](https://forumautomation.com/t/how-to-select-correct-temperature-sensor/917)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [March 25, 2016, 4:50pm UTC](https://forumautomation.com/t/how-to-select-correct-temperature-sensor/917 "2016-03-25T16:50:41Z")

</div>

Temperature Measurement How to select a Temperature sensor \*\* Performance Consideration\*\* 1.Determine the range of temperature to be measured. 2.Identify the operating media that is being measured. 3.Determine the t…

---

## [Gas Sensors - Industrial outlook](https://forumautomation.com/t/gas-sensors-industrial-outlook/4882)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [October 8, 2018, 6:14pm UTC](https://forumautomation.com/t/gas-sensors-industrial-outlook/4882 "2018-10-08T18:14:12Z")

</div>

Introduction Gas leaks are a common phenomenon though not always leading to hazardous accidents do pose a threat to the surrounding environment unless constantly monitored. Gas sensors, employed to detect these, have a w…

---

## [DataGator Flowmeter - Open channel flow meter](https://forumautomation.com/t/datagator-flowmeter-open-channel-flow-meter/6281)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 22, 2019, 3:22pm UTC](https://forumautomation.com/t/datagator-flowmeter-open-channel-flow-meter/6281 "2019-04-22T15:22:07Z")

</div>

DataGator is an open channel flowmeter, which is used to measure flow through large pipelines and open channels. Flow through such flow channel can be in different schemes, subcritical flow, supercritical flow, and surch…

---

## [What is the use of HART communicator](https://forumautomation.com/t/what-is-the-use-of-hart-communicator/9318)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 10, 2021, 3:35am UTC](https://forumautomation.com/t/what-is-the-use-of-hart-communicator/9318 "2021-04-10T03:35:25Z")

</div>

How does a HART communicator will be useful for industrial purpose

---

## [Can A Pressure Transmitter With High Turndown Ratio Measure All Pressures Accurately?](https://forumautomation.com/t/can-a-pressure-transmitter-with-high-turndown-ratio-measure-all-pressures-accurately/12018)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [May 4, 2024, 1:37am UTC](https://forumautomation.com/t/can-a-pressure-transmitter-with-high-turndown-ratio-measure-all-pressures-accurately/12018 "2024-05-04T01:37:31Z")

</div>

Can A Pressure Transmitter With High Turndown Ratio Measure All Pressures Accurately?

---

## [Instrumentation tools for material analysis](https://forumautomation.com/t/instrumentation-tools-for-material-analysis/5244)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 19, 2018, 3:43am UTC](https://forumautomation.com/t/instrumentation-tools-for-material-analysis/5244 "2018-11-19T03:43:38Z")

</div>

Characterization of materials involves measurement and analysis of different parameters namely: Physical - Dimension and Angles, Thickness, linewidth, Defects Chemical – Elemental composition and Dopant Concentrati…

---

## [How to check a thermocouple](https://forumautomation.com/t/how-to-check-a-thermocouple/8868)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [November 30, 2020, 12:31am UTC](https://forumautomation.com/t/how-to-check-a-thermocouple/8868 "2020-11-30T00:31:31Z")

</div>

Checking of thermocouple

---

## [Upstream and downstream straight length run is essential for an orifice plate flow measurement](https://forumautomation.com/t/upstream-and-downstream-straight-length-run-is-essential-for-an-orifice-plate-flow-measurement/71)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:02pm UTC](https://forumautomation.com/t/upstream-and-downstream-straight-length-run-is-essential-for-an-orifice-plate-flow-measurement/71 "2014-10-02T18:02:51Z")

</div>

The upstream can be identified by the orifice plate’s Tag number markings. Tag numbers are always marked on the upstream of the orifice plate. An upstream of 28D and a down steam of minimum 7D is essential for an a

---

## [How to select a Temperature sensor (Thermocouple Vs RTD)](https://forumautomation.com/t/how-to-select-a-temperature-sensor-thermocouple-vs-rtd/695)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [December 29, 2015, 2:30am UTC](https://forumautomation.com/t/how-to-select-a-temperature-sensor-thermocouple-vs-rtd/695 "2015-12-29T02:30:01Z")

</div>

Thermocouple or RTD which type of sensor is suitable for your application. Consider the following attributes and decide which sensor is good for your temperature measurement application. Thermocouple Operating Range (…

---

## [Bimetallic Strip - What is it?](https://forumautomation.com/t/bimetallic-strip-what-is-it/11061)

<div class="topic-metadata">

**Author:** [@Sudha\_m](https://forumautomation.com/u/Sudha_m)\
**Replies:** 0\
**Last updated:** [April 15, 2023, 10:15am UTC](https://forumautomation.com/t/bimetallic-strip-what-is-it/11061 "2023-04-15T10:15:57Z")

</div>

Bimetallic strip A thin strip that is joined together by two distinct metals is known as a bimetallic strip. The metals used to make the strip have various coefficients of thermal expansion, which means that when hea…

---

## [Why RTD measurement use 3 wires for a field signal connection](https://forumautomation.com/t/why-rtd-measurement-use-3-wires-for-a-field-signal-connection/91)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:30pm UTC](https://forumautomation.com/t/why-rtd-measurement-use-3-wires-for-a-field-signal-connection/91 "2014-10-02T18:30:22Z")

</div>

3 wire system is used in temperature measurement by an RTD to compensate the line resistance. Three wire system provides a Wheatstone Bridge in the measuring instrument.

---

## [What is Electric Submersible Pump (ESP)?](https://forumautomation.com/t/what-is-electric-submersible-pump-esp/12661)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [October 3, 2024, 4:42pm UTC](https://forumautomation.com/t/what-is-electric-submersible-pump-esp/12661 "2024-10-03T16:42:25Z")

</div>

What is Electric Submersible Pump (ESP)? Electric Submersible Pump (ESP) systems convert electrical energy into torque. ESPs add pressure to produced fluids by using a centrifugal pump powered up by a downhole elec…

---

## [What is cold junction compensation in thermocouple](https://forumautomation.com/t/what-is-cold-junction-compensation-in-thermocouple/8769)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [December 21, 2020, 3:58am UTC](https://forumautomation.com/t/what-is-cold-junction-compensation-in-thermocouple/8769 "2020-12-21T03:58:38Z")

</div>

Explain the process cold junction compensation in thermocouple

---

## [What are the key factors to consider when selecting a pressure sensor manufacturer for a specific application?](https://forumautomation.com/t/what-are-the-key-factors-to-consider-when-selecting-a-pressure-sensor-manufacturer-for-a-specific-application/11922)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [April 1, 2024, 2:46am UTC](https://forumautomation.com/t/what-are-the-key-factors-to-consider-when-selecting-a-pressure-sensor-manufacturer-for-a-specific-application/11922 "2024-04-01T02:46:37Z")

</div>

What are the key factors to consider when selecting a pressure sensor manufacturer for a specific application?

---

## [Maintaining pH Meter Accuracy: Importance and Methods of Verification](https://forumautomation.com/t/maintaining-ph-meter-accuracy-importance-and-methods-of-verification/11747)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [January 31, 2024, 6:27pm UTC](https://forumautomation.com/t/maintaining-ph-meter-accuracy-importance-and-methods-of-verification/11747 "2024-01-31T18:27:17Z")

</div>

The primary pH meter validation and verification tests are: 1). Calibration 2). Accuracy 3). Precision 4). Linearity 5). Stability 1). Calibration The pH meter must be calibrated before usage for reliable readin…

---

## [How to choose a solenoid valve?](https://forumautomation.com/t/how-to-choose-a-solenoid-valve/9698)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 5, 2021, 1:18pm UTC](https://forumautomation.com/t/how-to-choose-a-solenoid-valve/9698 "2021-08-05T13:18:40Z")

</div>

In this article, we are discussing what are the criteria we have to look at while choosing Solenoid Valves. Before choosing Solenoid valves, gather the information about what type of media they will be used for. Solenoi…

---

## [Interview Questions - What are the common continuous liquid level measurement methods?](https://forumautomation.com/t/interview-questions-what-are-the-common-continuous-liquid-level-measurement-methods/427)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [May 19, 2015, 4:25am UTC](https://forumautomation.com/t/interview-questions-what-are-the-common-continuous-liquid-level-measurement-methods/427 "2015-05-19T04:25:12Z")

</div>

The common methods employed for automatic continuous liquid level measurements are 1.Float and Cable 2.Displacement (buoyancy) 3.Head(Pressure) 4.Capacitance 5.Conductance 6.Radiation 7.Weight 8.Ultrasonic 9.Thermal

---

## [What is the purpose of nitrogen purging in industries](https://forumautomation.com/t/what-is-the-purpose-of-nitrogen-purging-in-industries/9932)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 22, 2021, 7:23am UTC](https://forumautomation.com/t/what-is-the-purpose-of-nitrogen-purging-in-industries/9932 "2021-10-22T07:23:16Z")

</div>

Why nitrogen purging is requires in local panels located in hazardous areas?

---

## [Humidity measurement using Salt cells](https://forumautomation.com/t/humidity-measurement-using-salt-cells/3072)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 2, 2018, 5:49pm UTC](https://forumautomation.com/t/humidity-measurement-using-salt-cells/3072 "2018-02-02T17:49:00Z")

</div>

Importance of Humidity measurement: Measurement and control of moisture/Humidity is an important consideration in many industrial processes. The moisture content of gas streams directly affects the overall profitabilit…

---

## [Meter categories in flow measurement](https://forumautomation.com/t/meter-categories-in-flow-measurement/3791)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 6, 2018, 12:36pm UTC](https://forumautomation.com/t/meter-categories-in-flow-measurement/3791 "2018-06-06T12:36:23Z")

</div>

The following main categories can be applied to MPFMs (Multiphase Flow Measurement) and are briefly described in the following Sections: Separation type meters o Full two-phase gas/liquid separation o Partial separatio…

---

## [What is the pressure for instrument air design?](https://forumautomation.com/t/what-is-the-pressure-for-instrument-air-design/12975)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 29, 2025, 9:36am UTC](https://forumautomation.com/t/what-is-the-pressure-for-instrument-air-design/12975 "2025-01-29T09:36:54Z")

</div>

What is the pressure for instrument air design?

---

## [What are Steam traps? How to maintain steam traps?](https://forumautomation.com/t/what-are-steam-traps-how-to-maintain-steam-traps/5961)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 19, 2019, 5:46pm UTC](https://forumautomation.com/t/what-are-steam-traps-how-to-maintain-steam-traps/5961 "2019-02-19T17:46:52Z")

</div>

What is a steam trap? The steam trap is a tool used to get rid of water from steam, where this water is useless and will even provide resistance to steam flow or can cause other losses. This steam trap is placed in t…

---

## [Cold junction compensation](https://forumautomation.com/t/cold-junction-compensation/88)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:26pm UTC](https://forumautomation.com/t/cold-junction-compensation/88 "2014-10-02T18:26:02Z")

</div>

‘Cold Junction Compensation’ is used in temperature measurement by means of a thermocouple. This compensation is to correct the error caused by the room (ambient) temperature. The mv produced by a thermocouple is proport…

---

## [Calibration of a static head level transmitter for an interface measurement](https://forumautomation.com/t/calibration-of-a-static-head-level-transmitter-for-an-interface-measurement/66)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:52pm UTC](https://forumautomation.com/t/calibration-of-a-static-head-level-transmitter-for-an-interface-measurement/66 "2014-10-02T17:52:31Z")

</div>

Static head level transmitter is not commonly used for measuring the interface level. But the following procedure may be used for calibrating it to measure the interface level in a tank. Fill the vessel 100% with the low…

---

## [Is 4-20mA signal AC or DC?](https://forumautomation.com/t/is-4-20ma-signal-ac-or-dc/13329)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 19, 2025, 5:17am UTC](https://forumautomation.com/t/is-4-20ma-signal-ac-or-dc/13329 "2025-07-19T05:17:08Z")

</div>

Is 4-20mA signal AC or DC?

---

## [How can control valve noise be predicted and mitigated in industrial settings?](https://forumautomation.com/t/how-can-control-valve-noise-be-predicted-and-mitigated-in-industrial-settings/11847)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [March 7, 2024, 7:33am UTC](https://forumautomation.com/t/how-can-control-valve-noise-be-predicted-and-mitigated-in-industrial-settings/11847 "2024-03-07T07:33:10Z")

</div>

How can control valve noise be predicted and mitigated in industrial settings?

---

## [Driver Motor IC L293D](https://forumautomation.com/t/driver-motor-ic-l293d/4966)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [October 20, 2018, 6:17pm UTC](https://forumautomation.com/t/driver-motor-ic-l293d/4966 "2018-10-20T18:17:31Z")

</div>

L293D IC is an IC specifically designed as a DC motor driver and can be controlled with TTL or microcontroller circuits. DC motor controlled by the L293D IC driver can be connected to ground or to a positive voltage sour…

---

## [What is Loop Dynamics?](https://forumautomation.com/t/what-is-loop-dynamics/2533)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [October 29, 2017, 11:34pm UTC](https://forumautomation.com/t/what-is-loop-dynamics/2533 "2017-10-29T23:34:14Z")

</div>

Loop Dynamics Loop dynamics is the study of how the system process variable (PV) changes,as a function of time,in response to a sudden input change or upset. The upset may be caused by process disturbance,a load change…

---

## [Why 4-20 milliampere signal is used in instrumentation](https://forumautomation.com/t/why-4-20-milliampere-signal-is-used-in-instrumentation/9923)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 18, 2021, 4:02am UTC](https://forumautomation.com/t/why-4-20-milliampere-signal-is-used-in-instrumentation/9923 "2021-10-18T04:02:29Z")

</div>

Explain why 4-20ma is used for instrumentation

---

## [HART Field Instrument communication through fiber Optic Cable: Working Principle with Block Diagram](https://forumautomation.com/t/hart-field-instrument-communication-through-fiber-optic-cable-working-principle-with-block-diagram/464)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [June 26, 2015, 7:23am UTC](https://forumautomation.com/t/hart-field-instrument-communication-through-fiber-optic-cable-working-principle-with-block-diagram/464 "2015-06-26T07:23:14Z")

</div>

By combining inexpensive and powerful laser diodes (emitter) with efficient photodiodes (detector), enough power (about 4 mA at 12 volt) is produced to operate a parked HART Field Instrument. The result is a point-to-poi…

---

## [What is a sensor?](https://forumautomation.com/t/what-is-a-sensor/769)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [February 8, 2016, 2:06am UTC](https://forumautomation.com/t/what-is-a-sensor/769 "2016-02-08T02:06:04Z")

</div>

A sensor is a device that receives and responds to a signal The signal is some type of energy for example heat,light,motion, or chemical. A sensor detects a signal converts it in to a readable ouput signal.

---

## [Calibration of gas analyzers](https://forumautomation.com/t/calibration-of-gas-analyzers/6168)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [March 30, 2019, 6:17pm UTC](https://forumautomation.com/t/calibration-of-gas-analyzers/6168 "2019-03-30T18:17:04Z")

</div>

Gas analyzers, they are devices where the output signal from the detector for the gas mixture under test is compared with that for mixtures of the bulk gas containing known concentrations of the determined. As the stand…

---

## [Differential pressure ratio for selection control valve type](https://forumautomation.com/t/differential-pressure-ratio-for-selection-control-valve-type/1236)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [August 7, 2016, 11:46pm UTC](https://forumautomation.com/t/differential-pressure-ratio-for-selection-control-valve-type/1236 "2016-08-07T23:46:34Z")

</div>

What is limitation on differential pressure ratio for selection control valve type i.e Ball type,Butterfly Type? What is international standard for this point?

---

## [Pressure detection circuit and function of pressure detector?](https://forumautomation.com/t/pressure-detection-circuit-and-function-of-pressure-detector/7148)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 18, 2019, 6:38pm UTC](https://forumautomation.com/t/pressure-detection-circuit-and-function-of-pressure-detector/7148 "2019-09-18T18:38:07Z")

</div>

Pressure detection circuit: The sensing element senses the monitoring system’s pressure and transforms the pressure into a mechanical signal. The transducer transforms the mechanical signal into an electrical signal…

---

## [How do you calculate the pipe size for the refrigeration system?](https://forumautomation.com/t/how-do-you-calculate-the-pipe-size-for-the-refrigeration-system/12786)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 7, 2024, 11:19am UTC](https://forumautomation.com/t/how-do-you-calculate-the-pipe-size-for-the-refrigeration-system/12786 "2024-11-07T11:19:29Z")

</div>

How do you calculate the pipe size for the refrigeration system?

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=18&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=20&per_page=50)
