# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=17

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 18

---

## [What is the major difference between fisher DVC 6000 & 6200 series positioner](https://forumautomation.com/t/what-is-the-major-difference-between-fisher-dvc-6000-6200-series-positioner/8847)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 23, 2020, 10:31am UTC](https://forumautomation.com/t/what-is-the-major-difference-between-fisher-dvc-6000-6200-series-positioner/8847 "2020-11-23T10:31:38Z")

</div>

Explain the difference between fisher DVC 6000 & 6200 series positioner

---

## [What is shutdown and turnaround?](https://forumautomation.com/t/what-is-shutdown-and-turnaround/12753)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 29, 2024, 11:39am UTC](https://forumautomation.com/t/what-is-shutdown-and-turnaround/12753 "2024-10-29T11:39:47Z")

</div>

What is shutdown and turnaround?

---

## [Shielding conductor wires](https://forumautomation.com/t/shielding-conductor-wires/3020)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [January 22, 2018, 8:32pm UTC](https://forumautomation.com/t/shielding-conductor-wires/3020 "2018-01-22T20:32:23Z")

</div>

\##Why is shielding needed? When a changing magnetic field cuts across a conductor, it will induce a current flow. The resistance in the circuits will convert this to a voltage. This can occur in conductor wire connect…

---

## [How to carryout a field zero check on a pressure transmitter](https://forumautomation.com/t/how-to-carryout-a-field-zero-check-on-a-pressure-transmitter/55)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:37pm UTC](https://forumautomation.com/t/how-to-carryout-a-field-zero-check-on-a-pressure-transmitter/55 "2014-10-02T17:37:15Z")

</div>

If the transmitter signal is used for controlling, then put the controller on manual. Connect a digital multimeter in the current range in series with the transmitter output. Isolate the process valve Isolate the instru…

---

## [7 – Best pressure drop calculator apps for android and their features](https://forumautomation.com/t/7-best-pressure-drop-calculator-apps-for-android-and-their-features/8569)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [August 27, 2020, 12:58pm UTC](https://forumautomation.com/t/7-best-pressure-drop-calculator-apps-for-android-and-their-features/8569 "2020-08-27T12:58:50Z")

</div>

1. Pressure drop calculator By using this app we can calculate the pressure drop of a fluid in a circular pipe due to its friction. In order to check this, we need some input parameters like pipe length, pipe diameter…

---

## [What is the difference between 3/2 and 4/2 solenoid valve](https://forumautomation.com/t/what-is-the-difference-between-3-2-and-4-2-solenoid-valve/9926)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [October 21, 2021, 4:45am UTC](https://forumautomation.com/t/what-is-the-difference-between-3-2-and-4-2-solenoid-valve/9926 "2021-10-21T04:45:35Z")

</div>

Explain how a 3/2 SOV is different from a 4/2 SOV

---

## [What are the applications of Guided wave radar level transmitter?](https://forumautomation.com/t/what-are-the-applications-of-guided-wave-radar-level-transmitter/698)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [December 30, 2015, 2:09am UTC](https://forumautomation.com/t/what-are-the-applications-of-guided-wave-radar-level-transmitter/698 "2015-12-30T02:09:22Z")

</div>

Guided wave radar is suitable for a variety level measurement applications 1.Unstable process conditions - Changes in viscosity,density or acidity do not affect affect accuracy 2.Agitated surfaces - Boiling surfaces,d…

---

## [What is Flow Meter and what are the types of flow meter?](https://forumautomation.com/t/what-is-flow-meter-and-what-are-the-types-of-flow-meter/9841)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [September 9, 2021, 11:52am UTC](https://forumautomation.com/t/what-is-flow-meter-and-what-are-the-types-of-flow-meter/9841 "2021-09-09T11:52:45Z")

</div>

What is a Gas Flow Meter? Flow meter is an instrument used to determine the existence of a material flow (liquid, gas, powder) in a pipeline. Namely, the flow rate is calculated by accumulating the total mass or volume …

---

## [How do you calibrate a gas flowmeter?](https://forumautomation.com/t/how-do-you-calibrate-a-gas-flowmeter/12621)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [October 19, 2024, 7:19am UTC](https://forumautomation.com/t/how-do-you-calibrate-a-gas-flowmeter/12621 "2024-10-19T07:19:15Z")

</div>

How do you calibrate a gas flowmeter?

---

## [Temperature transmitter problem?](https://forumautomation.com/t/temperature-transmitter-problem/8852)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [November 30, 2020, 1:11am UTC](https://forumautomation.com/t/temperature-transmitter-problem/8852 "2020-11-30T01:11:57Z")

</div>

My temperature transmitter is showing the value of 4.6ma at field but when I checked at panel side it is showing 3.5 ma. I have replaced my cable but the problem is still same.

---

## [How to troubleshoot On-Off / Shutdown Valve?](https://forumautomation.com/t/how-to-troubleshoot-on-off-shutdown-valve/11888)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [March 21, 2024, 4:48pm UTC](https://forumautomation.com/t/how-to-troubleshoot-on-off-shutdown-valve/11888 "2024-03-21T16:48:50Z")

</div>

---

## [FLOW TRANSMITTERS](https://forumautomation.com/t/flow-transmitters/6315)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [April 29, 2019, 5:54pm UTC](https://forumautomation.com/t/flow-transmitters/6315 "2019-04-29T17:54:30Z")

</div>

FLOW TRANSMITTER Flow transmitters will amplify the signals which are coming from a particular sensor and it will then be used properly such as signal processing or as a display. Flow transmit…

---

## [Basics of Torque measurement](https://forumautomation.com/t/basics-of-torque-measurement/1664)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 15, 2017, 6:20am UTC](https://forumautomation.com/t/basics-of-torque-measurement/1664 "2017-01-15T06:20:01Z")

</div>

A torque sensor measure the twist or windup between a rotating drive source and load source such as engine crankshaft or bicycle pedal. Torque = Force \* Distance 4 Main torque sensor designs Hollow cruciform 2.Solid …

---

## [During calibration, a pneumatic control valve with a positioner shows non-linear response and hysteresis when the input signal is varied from 4 mA to 20 mA. What is the most likely cause?](https://forumautomation.com/t/during-calibration-a-pneumatic-control-valve-with-a-positioner-shows-non-linear-response-and-hysteresis-when-the-input-signal-is-varied-from-4-ma-to-20-ma-what-is-the-most-likely-cause/12173)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [June 20, 2024, 5:20pm UTC](https://forumautomation.com/t/during-calibration-a-pneumatic-control-valve-with-a-positioner-shows-non-linear-response-and-hysteresis-when-the-input-signal-is-varied-from-4-ma-to-20-ma-what-is-the-most-likely-cause/12173 "2024-06-20T17:20:26Z")

</div>

During the calibration of a pneumatic control valve with a positioner, a technician notices that the valve does not respond linearly to the input signal. When the input signal is increased from 4 mA to 20 mA, the valve p…

---

## [What is a hydraulic power pack, and how does it supply power to hydraulic systems?](https://forumautomation.com/t/what-is-a-hydraulic-power-pack-and-how-does-it-supply-power-to-hydraulic-systems/12790)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 8, 2024, 1:35pm UTC](https://forumautomation.com/t/what-is-a-hydraulic-power-pack-and-how-does-it-supply-power-to-hydraulic-systems/12790 "2024-11-08T13:35:08Z")

</div>

What is a hydraulic power pack, and how does it supply power to hydraulic systems?

---

## [What is 10 o’clock and 12 o’clock position in Thermocouple?](https://forumautomation.com/t/what-is-10-o-clock-and-12-o-clock-position-in-thermocouple/12053)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [May 11, 2024, 4:10pm UTC](https://forumautomation.com/t/what-is-10-o-clock-and-12-o-clock-position-in-thermocouple/12053 "2024-05-11T16:10:46Z")

</div>

What is 10 o’clock and 12 o’clock position in Thermocouple ?

---

## [Temperature controller with event triggered output](https://forumautomation.com/t/temperature-controller-with-event-triggered-output/7324)

<div class="topic-metadata">

**Author:** [@Tsuo97](https://forumautomation.com/u/Tsuo97)\
**Replies:** 1\
**Last updated:** [November 19, 2019, 5:03pm UTC](https://forumautomation.com/t/temperature-controller-with-event-triggered-output/7324 "2019-11-19T17:03:54Z")

</div>

Hi guys! I was searching between the SOLO, Omron, Process Technology and Autonics temperature controllers for one which could handle an event triggered output. Is there a controller which triggers an output once the set…

---

## [If an operator informs you that the flow indication is higher than expected, how would you begin troubleshooting this issue?](https://forumautomation.com/t/if-an-operator-informs-you-that-the-flow-indication-is-higher-than-expected-how-would-you-begin-troubleshooting-this-issue/12100)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 2\
**Last updated:** [June 3, 2024, 2:06pm UTC](https://forumautomation.com/t/if-an-operator-informs-you-that-the-flow-indication-is-higher-than-expected-how-would-you-begin-troubleshooting-this-issue/12100 "2024-06-03T14:06:14Z")

</div>

If an operator informs you that the flow indication is higher than expected, how would you begin troubleshooting this issue? - in dp transmitter

---

## [Level measurement errors](https://forumautomation.com/t/level-measurement-errors/2554)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 2, 2017, 8:07pm UTC](https://forumautomation.com/t/level-measurement-errors/2554 "2017-11-02T20:07:16Z")

</div>

Differential pressure transmitters are used to pressure exerted by a level of water in a vessel. This places great importance on the physical and environmental problems that can affect the accuracy of this indirect measu…

---

## [EVOLUTION OF MICROPROCESSOR AND ITS APPLICATIONS](https://forumautomation.com/t/evolution-of-microprocessor-and-its-applications/6005)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [March 1, 2019, 5:44pm UTC](https://forumautomation.com/t/evolution-of-microprocessor-and-its-applications/6005 "2019-03-01T17:44:39Z")

</div>

MICROPROCESSOR A microprocessor is a computer processor that does the functions of a central processing unit it is a silicon chip that has millions of transistors and other electronic components…

---

## [Advantages and disadvantages of a turbine meter Vs an orifice plate flow measurement](https://forumautomation.com/t/advantages-and-disadvantages-of-a-turbine-meter-vs-an-orifice-plate-flow-measurement/80)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:15pm UTC](https://forumautomation.com/t/advantages-and-disadvantages-of-a-turbine-meter-vs-an-orifice-plate-flow-measurement/80 "2014-10-02T18:15:32Z")

</div>

Turbine meter is a good flow measuring unit when the fluid is low clean fluid. The turbine meter measures the volumetric flow. It is directly installed on the flow line. Its accuracy in flow measurement is high. Accuracy…

---

## [What is a delay valve ? Application, Advantages and Disadvantages](https://forumautomation.com/t/what-is-a-delay-valve-application-advantages-and-disadvantages/10830)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 8, 2023, 2:17pm UTC](https://forumautomation.com/t/what-is-a-delay-valve-application-advantages-and-disadvantages/10830 "2023-01-08T14:17:39Z")

</div>

What is delay valve? A delay valve is a type of valve that is used to control the flow of fluids in a system. It works by introducing a delay in the flow of fluid through the valve, which allows the pressure in the syst…

---

## [How to change the parameters of power-flex VFD 525](https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [February 5, 2021, 12:02pm UTC](https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133 "2021-02-05T12:02:35Z")

</div>

I want to change the paramters of Powerflex 525 VFD so that the drive’s faceplate only respond to start, stop and direction button.

---

## [Micro Gas sensor (Conductimetric gas sensors)](https://forumautomation.com/t/micro-gas-sensor-conductimetric-gas-sensors/5230)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 17, 2018, 6:41pm UTC](https://forumautomation.com/t/micro-gas-sensor-conductimetric-gas-sensors/5230 "2018-11-17T18:41:29Z")

</div>

Conductimetric gas sensors measure the concentration of an element in the gas, based on the principle of measuring a change in the electrical resistance of a material upon the introduction of the target gas. For sensing…

---

## [Vibration analysis for electric motor](https://forumautomation.com/t/vibration-analysis-for-electric-motor/7162)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 20, 2019, 6:01pm UTC](https://forumautomation.com/t/vibration-analysis-for-electric-motor/7162 "2019-09-20T18:01:07Z")

</div>

The fault detection and diagnosis is very important for the safety of the system. Like any other equipment group, electric motors can have a limited number of issues. Some issues arise, however, only in electric motors. …

---

## [What is pigtail syphon? What is a pigtail syphon used for?](https://forumautomation.com/t/what-is-pigtail-syphon-what-is-a-pigtail-syphon-used-for/11625)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [November 29, 2023, 3:53pm UTC](https://forumautomation.com/t/what-is-pigtail-syphon-what-is-a-pigtail-syphon-used-for/11625 "2023-11-29T15:53:50Z")

</div>

Pressure gauges are essential in monitoring and managing processes in industrial environments. When dealing with high-temperature fluids such as steam or superheated vapour, however, the sensitive components of pressure …

---

## [Flow Transmitter Readings mismatch with DCS](https://forumautomation.com/t/flow-transmitter-readings-mismatch-with-dcs/12295)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 1\
**Last updated:** [July 24, 2024, 5:52pm UTC](https://forumautomation.com/t/flow-transmitter-readings-mismatch-with-dcs/12295 "2024-07-24T17:52:18Z")

</div>

Flow Transmitter Readings mismatch with DCS

---

## [Oxygen Analyzer](https://forumautomation.com/t/oxygen-analyzer/5324)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 29, 2018, 1:27am UTC](https://forumautomation.com/t/oxygen-analyzer/5324 "2018-11-29T01:27:15Z")

</div>

It is an electronic device to measure the proportion of Oxygen in the fluid that is analysed. It is also refer to as Lambda sensor. The most common application is measuring exhausting as concentration of oxygen for inte…

---

## [Pickup Coil resistance check of mass flow meter](https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 4, 2020, 8:43am UTC](https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777 "2020-11-04T08:43:08Z")

</div>

How to check mass flow meter pickup coil resistance… (coil cable directly connected on electronic board inside flowmeter, then how to check)

---

## [What is the dew point for instrument air?](https://forumautomation.com/t/what-is-the-dew-point-for-instrument-air/12976)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 29, 2025, 1:00pm UTC](https://forumautomation.com/t/what-is-the-dew-point-for-instrument-air/12976 "2025-01-29T13:00:21Z")

</div>

What is the dew point for instrument air?

---

## [ADNOC Instrumentation Interview Questions](https://forumautomation.com/t/adnoc-instrumentation-interview-questions/12294)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [July 18, 2024, 3:40pm UTC](https://forumautomation.com/t/adnoc-instrumentation-interview-questions/12294 "2024-07-18T15:40:23Z")

</div>

1). What are the measures that should be taken while doing Hydro testing? All fittings, joints, flanges, blinds/hoses shall be rated. All the Gauges to be calibrated and certification plan. Back pressure valve shall be …

---

## [Free calibration E-Book](https://forumautomation.com/t/free-calibration-e-book/3470)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [April 22, 2018, 10:36pm UTC](https://forumautomation.com/t/free-calibration-e-book/3470 "2018-04-22T22:36:19Z")

</div>

Proper calibration of instruments for the process industries is essential. As a result, calibration experts at ISA teamed with Beamex to publish a free, in-depth guide to calibration automation, delivering the informatio…

---

## [What is modbus and profibus](https://forumautomation.com/t/what-is-modbus-and-profibus/9283)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 27, 2021, 10:28am UTC](https://forumautomation.com/t/what-is-modbus-and-profibus/9283 "2021-03-27T10:28:04Z")

</div>

Explain the modbus and profibus and how are they different

---

## [Safety Integrity Levels (SILs) for Industrial Processes](https://forumautomation.com/t/safety-integrity-levels-sils-for-industrial-processes/12875)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [December 2, 2024, 2:54am UTC](https://forumautomation.com/t/safety-integrity-levels-sils-for-industrial-processes/12875 "2024-12-02T02:54:51Z")

</div>

Safety Integrity Levels (SILs) for Industrial Processes In the setting of industrial processes and instruments, safety integrity levels (SIL) refer to how well a system or device decreases the risk of hazards. The IEC …

---

## [Different types of Hydraulic Pumps](https://forumautomation.com/t/different-types-of-hydraulic-pumps/5451)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [December 10, 2018, 11:33am UTC](https://forumautomation.com/t/different-types-of-hydraulic-pumps/5451 "2018-12-10T11:33:38Z")

</div>

The pump converts the mechanical energy of its primary motor into hydraulic energy by delivering a certain amount of hydraulic fluid at high pressure into the system. In general, all pumps are divided into two categorie…

---

## [Installation guidelines for sensing line installation](https://forumautomation.com/t/installation-guidelines-for-sensing-line-installation/6561)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 15, 2019, 5:28pm UTC](https://forumautomation.com/t/installation-guidelines-for-sensing-line-installation/6561 "2019-06-15T17:28:10Z")

</div>

Guideline for sensor line: Instrument sensing lines should be installed in accordance with the guidance presented in LANL Engineering Standards Manual ISD 341.2. Sensing installation manner shouldn’t interfere w…

---

## [What are the types of Level Gauges and its applications?](https://forumautomation.com/t/what-are-the-types-of-level-gauges-and-its-applications/9774)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 20, 2021, 11:59am UTC](https://forumautomation.com/t/what-are-the-types-of-level-gauges-and-its-applications/9774 "2021-08-20T11:59:47Z")

</div>

What is Level Gauges? Level Gauges is a type of meter used to determine the amount of liquid in a fixed storage or process tank. The head, float, tape, lower anchored bracket, guide wires, elbows, anchors, coupling, pip…

---

## [Which type of power supply is normally used inside the PLC is it DC or AC?](https://forumautomation.com/t/which-type-of-power-supply-is-normally-used-inside-the-plc-is-it-dc-or-ac/8897)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 2, 2020, 11:37am UTC](https://forumautomation.com/t/which-type-of-power-supply-is-normally-used-inside-the-plc-is-it-dc-or-ac/8897 "2020-12-02T11:37:53Z")

</div>

In panels of PLC like LCP PANEL and MARSHALLING CABINET the power supply used for Tube light inside panels is AC or DC ? Which one is generally used?

---

## [Gap voltage & its setting](https://forumautomation.com/t/gap-voltage-its-setting/123)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 2:39pm UTC](https://forumautomation.com/t/gap-voltage-its-setting/123 "2014-10-03T14:39:31Z")

</div>

Gap voltage is feed back voltage derived by setting the standard gap between the eddy probe tip and the rotating shaft. The gap voltage is the base DC voltage set to get the AC pulses peak per the radial vibration measu…

---

## [What is the purpose of manifold in Differential pressure type level transmitter?](https://forumautomation.com/t/what-is-the-purpose-of-manifold-in-differential-pressure-type-level-transmitter/10354)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 16, 2022, 8:26am UTC](https://forumautomation.com/t/what-is-the-purpose-of-manifold-in-differential-pressure-type-level-transmitter/10354 "2022-04-16T08:26:20Z")

</div>

Explain why a DP type level transmitter requires manifold

---

## [How to check the zero of a DP level transmitter while it is in line?](https://forumautomation.com/t/how-to-check-the-zero-of-a-dp-level-transmitter-while-it-is-in-line/8929)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [December 8, 2020, 6:03am UTC](https://forumautomation.com/t/how-to-check-the-zero-of-a-dp-level-transmitter-while-it-is-in-line/8929 "2020-12-08T06:03:17Z")

</div>

Checking the zero of in line DP level transmitter while it is in line

---

## [Troubleshooting Manual For electrical PUMP](https://forumautomation.com/t/troubleshooting-manual-for-electrical-pump/255)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [February 20, 2015, 6:31am UTC](https://forumautomation.com/t/troubleshooting-manual-for-electrical-pump/255 "2015-02-20T06:31:49Z")

</div>

INTRODUCTION:- Faults in a pump installation can have various causes. The fault may not be in the pump, it may also be caused by the pipe system or the operating conditions. Firstly, always check that installation has be…

---

## [Contact selection on high and low pressure alarm switches](https://forumautomation.com/t/contact-selection-on-high-and-low-pressure-alarm-switches/53)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 5:34pm UTC](https://forumautomation.com/t/contact-selection-on-high-and-low-pressure-alarm-switches/53 "2014-10-02T17:34:15Z")

</div>

On a high pressure switch, the wiring is terminated on the “common” and the “normally close” contact terminals. On a low pressure switch, the wiring is terminated on the “common” and the “normally open” contact terminal…

---

## [What are the different reference modes in pressure calibration?](https://forumautomation.com/t/what-are-the-different-reference-modes-in-pressure-calibration/1646)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 11, 2017, 4:07am UTC](https://forumautomation.com/t/what-are-the-different-reference-modes-in-pressure-calibration/1646 "2017-01-11T04:07:30Z")

</div>

The reference modes are Gauge,Absolute and Differential. Gauge Mode Referenced to atmospheric pressure. 0 means your test pressure is the same as atmosphere. Gauge mode is the most common reference mode. Can be both…

---

## [When is a control valve used without a positioner?](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [December 10, 2020, 1:49am UTC](https://forumautomation.com/t/when-is-a-control-valve-used-without-a-positioner/8924 "2020-12-10T01:49:49Z")

</div>

Can we use a control valve without a positioner

---

## [How to check for the error code number 2 on the Hart 475 communicator, and what does it mean?](https://forumautomation.com/t/how-to-check-for-the-error-code-number-2-on-the-hart-475-communicator-and-what-does-it-mean/12113)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [June 4, 2024, 5:35pm UTC](https://forumautomation.com/t/how-to-check-for-the-error-code-number-2-on-the-hart-475-communicator-and-what-does-it-mean/12113 "2024-06-04T17:35:51Z")

</div>

How to check for the error code number 2 on the Hart 475 communicator, and what does it mean?

---

## [Temperature Transmitter in underground line](https://forumautomation.com/t/temperature-transmitter-in-underground-line/9790)

<div class="topic-metadata">

**Author:** [@JP.Radhakrishnan](https://forumautomation.com/u/JP.Radhakrishnan)\
**Replies:** 2\
**Last updated:** [September 2, 2021, 1:12pm UTC](https://forumautomation.com/t/temperature-transmitter-in-underground-line/9790 "2021-09-02T13:12:18Z")

</div>

we need to install the skin type temperature transmitter in buried line after insulation joint. Concern is that if we install Temp Sensor (skin type) after insulation join the CP (cathodic protection) draining issue will…

---

## [Selection of flowmeter](https://forumautomation.com/t/selection-of-flowmeter/7768)

<div class="topic-metadata">

**Author:** [@gautam.vora](https://forumautomation.com/u/gautam.vora)\
**Replies:** 1\
**Last updated:** [September 2, 2020, 7:14am UTC](https://forumautomation.com/t/selection-of-flowmeter/7768 "2020-09-02T07:14:52Z")

</div>

In a differential pressure flow measurement method, how do we decide on the angle of tapping from the connecting flanges.

---

## [Instrument selection for flow measurement based on application](https://forumautomation.com/t/instrument-selection-for-flow-measurement-based-on-application/5243)

<div class="topic-metadata">

**Author:** [@divyasree](https://forumautomation.com/u/divyasree)\
**Replies:** 0\
**Last updated:** [November 19, 2018, 2:06am UTC](https://forumautomation.com/t/instrument-selection-for-flow-measurement-based-on-application/5243 "2018-11-19T02:06:27Z")

</div>

Flow measurement Flow Measurement is the process of measuring fluid in your plant or industry through a variety of different ways. count the number of times a fixed volume of fluid is filled indirectly calculate fl…

---

## [What is weigh feeder and why is it used in PID loop](https://forumautomation.com/t/what-is-weigh-feeder-and-why-is-it-used-in-pid-loop/9347)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [April 23, 2021, 4:27am UTC](https://forumautomation.com/t/what-is-weigh-feeder-and-why-is-it-used-in-pid-loop/9347 "2021-04-23T04:27:43Z")

</div>

Explain the weigh feeder and what is the purpose of weigh feeder in PID loop

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=16&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=18&per_page=50)
