# Field Instrumentation

**URL:** https://forumautomation.com/c/field-instrumentation/9.md?page=16

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 17

---

## [How to Avoid Temperature Effects in Differential Pressure Level Measurements?](https://forumautomation.com/t/how-to-avoid-temperature-effects-in-differential-pressure-level-measurements/11356)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [August 2, 2023, 1:57pm UTC](https://forumautomation.com/t/how-to-avoid-temperature-effects-in-differential-pressure-level-measurements/11356 "2023-08-02T13:57:56Z")

</div>

In this type of application, the differential pressure transmitter measures the pressure of the media in the tank, the pressure at the top of the tank, and the head pressure made by the fill fluid in the capillary. A…

---

## [What is the difference between Analogue & Digital PID Control Systems?](https://forumautomation.com/t/what-is-the-difference-between-analogue-digital-pid-control-systems/11789)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [February 14, 2024, 5:47am UTC](https://forumautomation.com/t/what-is-the-difference-between-analogue-digital-pid-control-systems/11789 "2024-02-14T05:47:09Z")

</div>

What is Analog PID Control System? An analogue PID control system employs analogue electrical components to carry out the proportional, integral, & derivative (PID) control method. It usually uses operational amplifiers…

---

## [What is pigging? How gauge pigging clean pipeline?](https://forumautomation.com/t/what-is-pigging-how-gauge-pigging-clean-pipeline/6830)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [July 24, 2019, 6:28pm UTC](https://forumautomation.com/t/what-is-pigging-how-gauge-pigging-clean-pipeline/6830 "2019-07-24T18:28:08Z")

</div>

What is pigging? Pigging is the process used to clean large pipelines during maintenance and installation, using devices called as ‘Pig’ which is inserted into a pipeline and which travels freely through it, driven by t…

---

## [Modern reservoir Well tests types](https://forumautomation.com/t/modern-reservoir-well-tests-types/3933)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [June 25, 2018, 6:56pm UTC](https://forumautomation.com/t/modern-reservoir-well-tests-types/3933 "2018-06-25T18:56:27Z")

</div>

There is a different type of tests conducted for an oil well. Each test type listed, including information on the condition at the time of testing, the type of hardware required, the typical test duration and test radius…

---

## [How can we check the control valve passing?](https://forumautomation.com/t/how-can-we-check-the-control-valve-passing/9088)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [January 21, 2021, 8:21am UTC](https://forumautomation.com/t/how-can-we-check-the-control-valve-passing/9088 "2021-01-21T08:21:04Z")

</div>

What are the steps to check the control valve passing

---

## [Advantages and Limitations of Magnetic Flow Meters in Water and Wastewater Applications](https://forumautomation.com/t/advantages-and-limitations-of-magnetic-flow-meters-in-water-and-wastewater-applications/11027)

<div class="topic-metadata">

**Author:** [@RafiulShuvo](https://forumautomation.com/u/RafiulShuvo)\
**Replies:** 1\
**Last updated:** [November 27, 2025, 8:30am UTC](https://forumautomation.com/t/advantages-and-limitations-of-magnetic-flow-meters-in-water-and-wastewater-applications/11027 "2025-11-27T08:30:22Z")

</div>

In water and wastewater management, accurate and reliable flow measurement is of utmost importance. Without accurate flow measurement, it is impossible to control and optimize processes, leading to inefficient operati…

---

## [15 Piping Interview questions](https://forumautomation.com/t/15-piping-interview-questions/6882)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [July 30, 2019, 5:34pm UTC](https://forumautomation.com/t/15-piping-interview-questions/6882 "2019-07-30T17:34:17Z")

</div>

1. What are the main duties of the piping inspector? Material receiving an inspection Storage & preservation Cutting,assembly & fit-up Pre-welding inspection Visual inspection of socket & threaded joint…

---

## [What is Limit Switch?](https://forumautomation.com/t/what-is-limit-switch/10615)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 27, 2022, 4:40am UTC](https://forumautomation.com/t/what-is-limit-switch/10615 "2022-08-27T04:40:14Z")

</div>

Limit switches are used to detect or feel the presence of an object or to monitor and signal whether the object’s movement restrictions have been exceeded. Limit switches were originally used to specify the limit or endp…

---

## [What is sampling?](https://forumautomation.com/t/what-is-sampling/6291)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [April 24, 2019, 7:04pm UTC](https://forumautomation.com/t/what-is-sampling/6291 "2019-04-24T19:04:19Z")

</div>

What is sampling? The sampling system is designed to obtain a genuinely representative sample of the solid, liquid or gas to be analyzed at an adequate and stable rate and to transport it to the analytical instrument wit…

---

## [Why is zirconia used in oxygen sensors?](https://forumautomation.com/t/why-is-zirconia-used-in-oxygen-sensors/11491)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [September 26, 2023, 2:55am UTC](https://forumautomation.com/t/why-is-zirconia-used-in-oxygen-sensors/11491 "2023-09-26T02:55:07Z")

</div>

Zirconia is employed in oxygen sensors, specifically in a type of sensor called a “zirconia oxygen sensor” or “zirconia-based oxygen sensor,” due to its distinct electrical and oxygen-ion conducting capabilities. To …

---

## [Different types of Moisture measurement Instruments](https://forumautomation.com/t/different-types-of-moisture-measurement-instruments/1658)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [January 14, 2017, 7:27am UTC](https://forumautomation.com/t/different-types-of-moisture-measurement-instruments/1658 "2017-01-14T07:27:27Z")

</div>

Conductivity - Moisture measurement Measurement of how a specific material conducts electricity. Can measure the capacitance,conductance or resistance of a material. Water is a poor conductor. The change of how a mat…

---

## [Direct acting and Reverse acting control valve](https://forumautomation.com/t/direct-acting-and-reverse-acting-control-valve/110)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 3, 2014, 12:59pm UTC](https://forumautomation.com/t/direct-acting-and-reverse-acting-control-valve/110 "2014-10-03T12:59:56Z")

</div>

Direct acting control valve : The valve port closes on air failure. Reverse acting control valve: The valve ports on an air failure.

---

## [How to calibrate the differential pressure transmitter without taking it out of the process?](https://forumautomation.com/t/how-to-calibrate-the-differential-pressure-transmitter-without-taking-it-out-of-the-process/8889)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 3\
**Last updated:** [December 7, 2020, 5:59am UTC](https://forumautomation.com/t/how-to-calibrate-the-differential-pressure-transmitter-without-taking-it-out-of-the-process/8889 "2020-12-07T05:59:33Z")

</div>

Is it possible to calibrate differential pressure transmitter, which is used to measure steam, and we are not going to take it out of the process

---

## [Can a high pressure valve be substituted for a lower pressure valve?](https://forumautomation.com/t/can-a-high-pressure-valve-be-substituted-for-a-lower-pressure-valve/1282)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 1\
**Last updated:** [August 27, 2016, 11:47pm UTC](https://forumautomation.com/t/can-a-high-pressure-valve-be-substituted-for-a-lower-pressure-valve/1282 "2016-08-27T23:47:42Z")

</div>

Is it possible to use a high pressure valve instead low pressure valve?

---

## [Flow measured on a square root scale](https://forumautomation.com/t/flow-measured-on-a-square-root-scale/74)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [October 2, 2014, 6:05pm UTC](https://forumautomation.com/t/flow-measured-on-a-square-root-scale/74 "2014-10-02T18:05:01Z")

</div>

Flow is measured on a square root scale only when the measurement is done through an orifice plate and a DP transmitter. The flow measured through the orifice plate is always proportional to the square root of the DP acr…

---

## [Control valve leakage protection Part 1- for Plug valve and Ball valve](https://forumautomation.com/t/control-valve-leakage-protection-part-1-for-plug-valve-and-ball-valve/4448)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [August 23, 2018, 10:13am UTC](https://forumautomation.com/t/control-valve-leakage-protection-part-1-for-plug-valve-and-ball-valve/4448 "2018-08-23T10:13:42Z")

</div>

Good care must be given to control valve to reduce the problems that may be possible repairs and leakage without shutting down the system when not harmful. If in a dangerous position then the repair of the valve must be …

---

## [What is TORBAR? How does it work?](https://forumautomation.com/t/what-is-torbar-how-does-it-work/9765)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 18, 2021, 12:12pm UTC](https://forumautomation.com/t/what-is-torbar-how-does-it-work/9765 "2021-08-18T12:12:42Z")

</div>

What is TORBAR? The TORBAR is a self-averaging flow meter with multiple ports. Its design is similar to that of a pitot tube, which is used to measure fluid flow. How does TORBAR work? TORBAR generates an average d…

---

## [What is Protective Relay and its Types?](https://forumautomation.com/t/what-is-protective-relay-and-its-types/9829)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [September 6, 2021, 12:50pm UTC](https://forumautomation.com/t/what-is-protective-relay-and-its-types/9829 "2021-09-06T12:50:36Z")

</div>

What is Protective Relay? A protecting relay is an automatic electric component designed to experience a circuit breaker while a fault is detected. The first protecting relays were electromagnetic devices, relying on co…

---

## [Maintenance of water tube boilers](https://forumautomation.com/t/maintenance-of-water-tube-boilers/5997)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 27, 2019, 5:07pm UTC](https://forumautomation.com/t/maintenance-of-water-tube-boilers/5997 "2019-02-27T17:07:17Z")

</div>

Boilers are machines that deal with high temperature and pressure in the power industry, which makes the boiler more important equipment and needed regular maintenance. Daily maintenance of Boilers: Things that need …

---

## [What is normally open and normally closed solenoid valve](https://forumautomation.com/t/what-is-normally-open-and-normally-closed-solenoid-valve/9954)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [November 1, 2021, 6:51am UTC](https://forumautomation.com/t/what-is-normally-open-and-normally-closed-solenoid-valve/9954 "2021-11-01T06:51:20Z")

</div>

Explain the purpose of normally open and normally closed solenoid valve

---

## [What is wet & dry calibration procedure of displacer type level transmitter](https://forumautomation.com/t/what-is-wet-dry-calibration-procedure-of-displacer-type-level-transmitter/9223)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 1\
**Last updated:** [March 5, 2021, 5:39am UTC](https://forumautomation.com/t/what-is-wet-dry-calibration-procedure-of-displacer-type-level-transmitter/9223 "2021-03-05T05:39:46Z")

</div>

Explain the wet and dry calibration procedure of displacer type level transmitter

---

## [How is the test pressure determined for a hydrostatic test?](https://forumautomation.com/t/how-is-the-test-pressure-determined-for-a-hydrostatic-test/12177)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [June 22, 2024, 1:12pm UTC](https://forumautomation.com/t/how-is-the-test-pressure-determined-for-a-hydrostatic-test/12177 "2024-06-22T13:12:06Z")

</div>

How is the test pressure determined for a hydrostatic test?

---

## [What is K-factor in Coriolis meter?](https://forumautomation.com/t/what-is-k-factor-in-coriolis-meter/12924)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [January 2, 2025, 10:33am UTC](https://forumautomation.com/t/what-is-k-factor-in-coriolis-meter/12924 "2025-01-02T10:33:15Z")

</div>

What is K-factor in Coriolis meter?

---

## [What is zero trim and lower trim?](https://forumautomation.com/t/what-is-zero-trim-and-lower-trim/10806)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [December 23, 2022, 3:12pm UTC](https://forumautomation.com/t/what-is-zero-trim-and-lower-trim/10806 "2022-12-23T15:12:50Z")

</div>

In instrumentation, “zero trim” refers to the process of adjusting the zero point or baseline reading of an instrument so that it reads accurately when it is not detecting any signal or input. This is often done to com…

---

## [What is the difference between high pressure valve and low pressure valve air compressor?](https://forumautomation.com/t/what-is-the-difference-between-high-pressure-valve-and-low-pressure-valve-air-compressor/12218)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 1\
**Last updated:** [June 28, 2024, 10:20am UTC](https://forumautomation.com/t/what-is-the-difference-between-high-pressure-valve-and-low-pressure-valve-air-compressor/12218 "2024-06-28T10:20:42Z")

</div>

What is the difference between high pressure valve and low pressure valve air compressor? \*

---

## [What are the advantages of optical type dissolved oxygen sensor?](https://forumautomation.com/t/what-are-the-advantages-of-optical-type-dissolved-oxygen-sensor/1394)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [September 24, 2016, 5:27am UTC](https://forumautomation.com/t/what-are-the-advantages-of-optical-type-dissolved-oxygen-sensor/1394 "2016-09-24T05:27:31Z")

</div>

Advantages of Optical Dissolved Oxygen Sensor Instant on-No warm up time is required Exhibit very little calibration drift and can hold a calibration for months Not susceptible to interference like hydrogen sulfide Non…

---

## [How to calibrate HART transmitter](https://forumautomation.com/t/how-to-calibrate-hart-transmitter/4540)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [September 3, 2018, 6:08pm UTC](https://forumautomation.com/t/how-to-calibrate-hart-transmitter/4540 "2018-09-03T18:08:22Z")

</div>

A HART transmitter has a microprocessor that manipulates the input data. Normally there are three calculation sections involved, and each of these sections can be individually tested and adjusted. At the beginning the…

---

## [Saudi Aramco Instrumentation Interview Questions](https://forumautomation.com/t/saudi-aramco-instrumentation-interview-questions/12446)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [August 16, 2024, 10:55am UTC](https://forumautomation.com/t/saudi-aramco-instrumentation-interview-questions/12446 "2024-08-16T10:55:51Z")

</div>

\[color=#ff7700\] 1). What are the inspection points for cable tray installations? \[/color\] Material check in accordance with permitted specifications, size and type, tray hook-up, correct distance structure, tray-to-tr…

---

## [How do you carry out piping for a Different pressure flow transmitter on liquids, Gas and steam services? Why?](https://forumautomation.com/t/how-do-you-carry-out-piping-for-a-different-pressure-flow-transmitter-on-liquids-gas-and-steam-services-why/11189)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [May 25, 2023, 6:02am UTC](https://forumautomation.com/t/how-do-you-carry-out-piping-for-a-different-pressure-flow-transmitter-on-liquids-gas-and-steam-services-why/11189 "2023-05-25T06:02:37Z")

</div>

When installing a differential pressure (DP) flow transmitter for liquid, gas, or steam services, proper piping design is crucial to ensure accurate and reliable measurements. The design considerations and practices for …

---

## [What is Seebeck effect?](https://forumautomation.com/t/what-is-seebeck-effect/5343)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 30, 2018, 4:30pm UTC](https://forumautomation.com/t/what-is-seebeck-effect/5343 "2018-11-30T16:30:42Z")

</div>

What is Seebeck effect? The concept of the Seebeck effect illustrates that if there are two materials or metal materials (usually semiconductors) that are connected to be in an environment with two different temperatures…

---

## [Inaccurate Flow Measurement in Electromagnetic Flow Meter](https://forumautomation.com/t/inaccurate-flow-measurement-in-electromagnetic-flow-meter/12247)

<div class="topic-metadata">

**Author:** [@automation\_engineer6](https://forumautomation.com/u/automation_engineer6)\
**Replies:** 3\
**Last updated:** [November 27, 2025, 8:33am UTC](https://forumautomation.com/t/inaccurate-flow-measurement-in-electromagnetic-flow-meter/12247 "2025-11-27T08:33:47Z")

</div>

Symptoms: The flow meter reading is erratic or significantly deviates from the expected flow rate. The flow meter shows zero flow when there is actual flow in the pipe. The displayed flow rate fluctuates rapidly.

---

## [Pipeline sizing criteria](https://forumautomation.com/t/pipeline-sizing-criteria/6853)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [July 26, 2019, 6:18pm UTC](https://forumautomation.com/t/pipeline-sizing-criteria/6853 "2019-07-26T18:18:43Z")

</div>

Pipe Sizing: Process Engineer is responsible for specifying the diameter of all pipes in a processing unit. For pipe sizing, Pressure drop, maximum permissible velocity from the point of view of erosion and noise, an…

---

## [What is the difference between flashing and cavitation?](https://forumautomation.com/t/what-is-the-difference-between-flashing-and-cavitation/12096)

<div class="topic-metadata">

**Author:** [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Replies:** 1\
**Last updated:** [May 30, 2024, 8:11pm UTC](https://forumautomation.com/t/what-is-the-difference-between-flashing-and-cavitation/12096 "2024-05-30T20:11:53Z")

</div>

What is the difference between flashing and cavitation?

---

## [5 – Best RTD converter apps for android and their features](https://forumautomation.com/t/5-best-rtd-converter-apps-for-android-and-their-features/8550)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [August 22, 2020, 11:23am UTC](https://forumautomation.com/t/5-best-rtd-converter-apps-for-android-and-their-features/8550 "2020-08-22T11:23:24Z")

</div>

1. Retherm-RTD & Thermocouples This app can convert resistance from RTD sensors to temperature. It can be used to convert Pt100, Pt500, and Pt1000 resistance to degree Celsius or Fahrenheit. Mostly the equations are d…

---

## [What does it mean if a valve is passing?](https://forumautomation.com/t/what-does-it-mean-if-a-valve-is-passing/13361)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 12, 2025, 4:58am UTC](https://forumautomation.com/t/what-does-it-mean-if-a-valve-is-passing/13361 "2025-07-12T04:58:46Z")

</div>

What does it mean if a valve is passing?

---

## [Calibration techniques - pH meter (How to do proper calibration)?](https://forumautomation.com/t/calibration-techniques-ph-meter-how-to-do-proper-calibration/1286)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [August 28, 2016, 3:38am UTC](https://forumautomation.com/t/calibration-techniques-ph-meter-how-to-do-proper-calibration/1286 "2016-08-28T03:38:56Z")

</div>

pH meter Calibration Techniques Incorrect calibration is a major contributor to error found in measurement. Proper technique may vary from process to process. Some of the inproper calibration are listed below. -Tempe…

---

## [Problems related to positioner](https://forumautomation.com/t/problems-related-to-positioner/8813)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [November 16, 2020, 4:02pm UTC](https://forumautomation.com/t/problems-related-to-positioner/8813 "2020-11-16T16:02:58Z")

</div>

i have an control valve with SRD991(FF type) make positioner… normally on close loop, valve open at 50% positioner Air fail valve goes to Fail safe position. But while at Air return back valve move above 50% then slowly …

---

## [What is the K factor of the orifice plate?](https://forumautomation.com/t/what-is-the-k-factor-of-the-orifice-plate/13180)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [June 11, 2025, 10:10am UTC](https://forumautomation.com/t/what-is-the-k-factor-of-the-orifice-plate/13180 "2025-06-11T10:10:42Z")

</div>

What is the K factor of the orifice plate?

---

## [What is the Purpose of Grounding in the Electromagnetic Flowmeter?](https://forumautomation.com/t/what-is-the-purpose-of-grounding-in-the-electromagnetic-flowmeter/11799)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [November 27, 2025, 8:32am UTC](https://forumautomation.com/t/what-is-the-purpose-of-grounding-in-the-electromagnetic-flowmeter/11799 "2025-11-27T08:32:13Z")

</div>

Electromagnetic flowmeter grounding improves to the accuracy, reliability, and safety of these instruments in a number of important ways. In many different sectors, electromagnetic flowmeters are used to measure the …

---

## [What is a V-ball valve?](https://forumautomation.com/t/what-is-a-v-ball-valve/10505)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [June 28, 2022, 4:20am UTC](https://forumautomation.com/t/what-is-a-v-ball-valve/10505 "2022-06-28T04:20:54Z")

</div>

What is a ball valve? A ball valve is a type of shut-off valve that regulates the flow of a liquid or gas using a rotatable ball with a bore. The medium can flow through or is blocked by turning the ball a quarter-turn …

---

## [RTD Common Problems and Solutions](https://forumautomation.com/t/rtd-common-problems-and-solutions/13058)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [February 26, 2025, 1:29pm UTC](https://forumautomation.com/t/rtd-common-problems-and-solutions/13058 "2025-02-26T13:29:24Z")

</div>

Common RTD faults include inaccurate readings caused by calibration drift, wire resistance affecting the measurement (especially in 2-wire circuits), electrical noise from nearby equipment, and lead wire connection issue…

---

## [Why is 4 to 20mA standard?](https://forumautomation.com/t/why-is-4-to-20ma-standard/13328)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 1\
**Last updated:** [July 5, 2025, 5:24am UTC](https://forumautomation.com/t/why-is-4-to-20ma-standard/13328 "2025-07-05T05:24:51Z")

</div>

Why is 4 to 20mA standard?

---

## [How to configure the DP type flow meter in FF](https://forumautomation.com/t/how-to-configure-the-dp-type-flow-meter-in-ff/9033)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [December 30, 2020, 1:52pm UTC](https://forumautomation.com/t/how-to-configure-the-dp-type-flow-meter-in-ff/9033 "2020-12-30T13:52:30Z")

</div>

Explain the configuration of DP type flow meter in FF

---

## [Problems related to connecting the modbus RS 485](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [May 23, 2021, 2:31am UTC](https://forumautomation.com/t/problems-related-to-connecting-the-modbus-rs-485/9419 "2021-05-23T02:31:04Z")

</div>

How to connect the Modbus RS 485 looping for SE Altivar12 and Altivar212 using the RJ-45 connection. I have used Blue and Blue white from RJ45 pin to RS 485 to USB converter to test on Modscan. It always shows device ini…

---

## [Why we open low side in atmosphere of open tank transmitter tapping](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [January 28, 2021, 9:08pm UTC](https://forumautomation.com/t/why-we-open-low-side-in-atmosphere-of-open-tank-transmitter-tapping/9099 "2021-01-28T21:08:19Z")

</div>

What is the reason to open the low side of tank transmitter tapping to the atmosphere

---

## [Why we preferably use 4-20 MA over 0-10V & 0-20 MA as a analog signal?](https://forumautomation.com/t/why-we-preferably-use-4-20-ma-over-0-10v-0-20-ma-as-a-analog-signal/8817)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [December 3, 2020, 5:58pm UTC](https://forumautomation.com/t/why-we-preferably-use-4-20-ma-over-0-10v-0-20-ma-as-a-analog-signal/8817 "2020-12-03T17:58:19Z")

</div>

Purpose of using 4-20 MA as analog signal

---

## [Can we use a control valve without positioner and what are the uses of control valve with positioner?](https://forumautomation.com/t/can-we-use-a-control-valve-without-positioner-and-what-are-the-uses-of-control-valve-with-positioner/11216)

<div class="topic-metadata">

**Author:** [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Replies:** 0\
**Last updated:** [June 6, 2023, 7:30am UTC](https://forumautomation.com/t/can-we-use-a-control-valve-without-positioner-and-what-are-the-uses-of-control-valve-with-positioner/11216 "2023-06-06T07:30:02Z")

</div>

Can we use a control valve without positioner ? Yes, it is possible to use a control valve without a positioner. A control valve is a crucial component in industrial processes that regulates the flow, pressure, or leve…

---

## [Advice on a load cell sensor](https://forumautomation.com/t/advice-on-a-load-cell-sensor/12140)

<div class="topic-metadata">

**Author:** [@Cotafam](https://forumautomation.com/u/Cotafam)\
**Replies:** 2\
**Last updated:** [June 6, 2024, 4:52pm UTC](https://forumautomation.com/t/advice-on-a-load-cell-sensor/12140 "2024-06-06T16:52:28Z")

</div>

I want a pinion-style load cell to tell if a mast has been placed at a station. If enough weight is applied I want a signal to be broadcasted (digital signal) to know when the mast is there. If this makes sense. I do not…

---

## [Shut down sensors for Wellhead Control Panel](https://forumautomation.com/t/shut-down-sensors-for-wellhead-control-panel/7522)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [December 6, 2019, 4:34pm UTC](https://forumautomation.com/t/shut-down-sensors-for-wellhead-control-panel/7522 "2019-12-06T16:34:29Z")

</div>

WHCP installed near the wellhead incorporates all that components installed together in WHCP to do as a control function to operate the well. Wellhead control is used to monitor the flow conditions and to initiate a s…

---

## [Commonly used flow measuring elements and design consideration](https://forumautomation.com/t/commonly-used-flow-measuring-elements-and-design-consideration/418)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [May 8, 2015, 10:59pm UTC](https://forumautomation.com/t/commonly-used-flow-measuring-elements-and-design-consideration/418 "2015-05-08T22:59:17Z")

</div>

Most commonly used flow measuring elements are Orifice,Flow nozzle and Venturi Orifice Plates Thin plate ,concentric orifice can be used for any steady flow of clean ,homogeneous fluid which is in the normal turbulent …

[Previous page](https://forumautomation.com/c/field-instrumentation/9.md?page=15&per_page=50)

[Next page](https://forumautomation.com/c/field-instrumentation/9.md?page=17&per_page=50)
