# Electrical

**URL:** https://forumautomation.com/c/electrical/11.md?page=1

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 2

---

## [Why use a variable frequency drive (vfd)?](https://forumautomation.com/t/why-use-a-variable-frequency-drive-vfd/725)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 1\
**Last updated:** [April 11, 2016, 5:46am UTC](https://forumautomation.com/t/why-use-a-variable-frequency-drive-vfd/725 "2016-04-11T05:46:18Z")

</div>

Use of Variable Frequency Drive 1.Speed control 2.Torque control 3.Motor protection 4.Possible energy savings 5.Zero speed/over speed protection 6.Remote Monitor/Control

---

## [How can we auto reset faults on ABB ACS 580 drive?](https://forumautomation.com/t/how-can-we-auto-reset-faults-on-abb-acs-580-drive/8659)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [October 8, 2020, 2:59pm UTC](https://forumautomation.com/t/how-can-we-auto-reset-faults-on-abb-acs-580-drive/8659 "2020-10-08T14:59:34Z")

</div>

This drive’s automatic reset feature would be turned off by default and it must be enabled by the operator. By doing this we are starting the drive and the motor by clearing faults, so we must only enable this only if it…

---

## [7 Best automotive wiring app and their features](https://forumautomation.com/t/7-best-automotive-wiring-app-and-their-features/7984)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [March 5, 2020, 5:24am UTC](https://forumautomation.com/t/7-best-automotive-wiring-app-and-their-features/7984 "2020-03-05T05:24:40Z")

</div>

How does automotive electrical system works The working of an automotive is not entirely dependent upon the mechanical system, electrical power is also used for its working. The alternator, battery, and starter are the …

---

## [How Regenerative braking system can be used to Reduce the fuel consumption in Vehicles?](https://forumautomation.com/t/how-regenerative-braking-system-can-be-used-to-reduce-the-fuel-consumption-in-vehicles/6857)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [July 27, 2019, 4:01am UTC](https://forumautomation.com/t/how-regenerative-braking-system-can-be-used-to-reduce-the-fuel-consumption-in-vehicles/6857 "2019-07-27T04:01:00Z")

</div>

What is Regenerative braking system in Electric vehicles It is a type of braking method by which the mechanical energy from the load is converted into electrical energy and it is regenerated back into the line is know…

---

## [Hall effect and its applications](https://forumautomation.com/t/hall-effect-and-its-applications/7179)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [September 23, 2019, 12:02pm UTC](https://forumautomation.com/t/hall-effect-and-its-applications/7179 "2019-09-23T12:02:42Z")

</div>

What is hall effect The effect of generating measurable voltage by using a magnetic field is called a hall-effect it’s a phenomenon which occurs in a current-carrying conductor when it is placed in a magnetic field perp…

---

## [WHY BREAKER FAILURE PROTECTION IS REQUIRED?](https://forumautomation.com/t/why-breaker-failure-protection-is-required/6463)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [May 29, 2019, 8:41am UTC](https://forumautomation.com/t/why-breaker-failure-protection-is-required/6463 "2019-05-29T08:41:59Z")

</div>

WHY BREAKER FAILURE PROTECTION Breaker failure protection is needed to provide protection when the circuit breaker does not correctly interrupt the fault, the breaker failure condition is known as “stuck breaker”, thi…

---

## [11 types of transformer faults and how to protect the transformer from these faults](https://forumautomation.com/t/11-types-of-transformer-faults-and-how-to-protect-the-transformer-from-these-faults/7718)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [January 14, 2020, 11:53am UTC](https://forumautomation.com/t/11-types-of-transformer-faults-and-how-to-protect-the-transformer-from-these-faults/7718 "2020-01-14T11:53:34Z")

</div>

What is a transformer A transformer is a device which helps with the transmission of electrical power, it is a static device without any rotating part and is totally enclosed. So the transformer plays a major role in th…

---

## [What is a circuit breaker?](https://forumautomation.com/t/what-is-a-circuit-breaker/1144)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [July 4, 2016, 8:16pm UTC](https://forumautomation.com/t/what-is-a-circuit-breaker/1144 "2016-07-04T20:16:36Z")

</div>

Circuit Breaker Circuit breaker is an electrical switch that is designed to protect an electrical circuit from damage cause by several factors such as Electricity overload- Overload is an excess amperage flowing over a…

---

## [What is ATS (Automatic Transfer Switch)?](https://forumautomation.com/t/what-is-ats-automatic-transfer-switch/3806)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [October 11, 2024, 11:47am UTC](https://forumautomation.com/t/what-is-ats-automatic-transfer-switch/3806 "2024-10-11T11:47:56Z")

</div>

What is ATS? Transfer switches are critical components of any emergency or standby power system. When the normal (preferred) source of power is lost, a transfer switch quickly and safely shifts the load circuit from the …

---

## [Does current flow through the neutral wire when there is no load?](https://forumautomation.com/t/does-current-flow-through-the-neutral-wire-when-there-is-no-load/12342)

<div class="topic-metadata">

**Author:** [@NicholasDeo](https://forumautomation.com/u/NicholasDeo)\
**Replies:** 3\
**Last updated:** [July 23, 2026, 2:40pm UTC](https://forumautomation.com/t/does-current-flow-through-the-neutral-wire-when-there-is-no-load/12342 "2026-07-23T14:40:18Z")

</div>

Reference Image Provided by the Respondent Does current flow through the neutral wire when there is no load?

---

## [What is a Solenoid valve and How it works?](https://forumautomation.com/t/what-is-a-solenoid-valve-and-how-it-works/9722)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 10, 2021, 12:37pm UTC](https://forumautomation.com/t/what-is-a-solenoid-valve-and-how-it-works/9722 "2021-08-10T12:37:20Z")

</div>

What is a Solenoid Valve? A solenoid valve is an electromechanically operated valve that converts electrical energy to mechanical energy, thereby creating a magnetic reaction. A solenoid is a group of coiled wires th…

---

## [How to set parameters for VFD programming?](https://forumautomation.com/t/how-to-set-parameters-for-vfd-programming/8481)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 1\
**Last updated:** [March 31, 2026, 11:04am UTC](https://forumautomation.com/t/how-to-set-parameters-for-vfd-programming/8481 "2026-03-31T11:04:39Z")

</div>

Introduction A variable frequency drive or variable speed drive would change the speed of the motor from fixed to variable. So a VFD does this by changing the frequency and voltage applied to a motor. When we use a VFD …

---

## [Electrical Instrument Condition monitoring using ESA (Electrical Signature Analysis)](https://forumautomation.com/t/electrical-instrument-condition-monitoring-using-esa-electrical-signature-analysis/6440)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [May 24, 2019, 2:03pm UTC](https://forumautomation.com/t/electrical-instrument-condition-monitoring-using-esa-electrical-signature-analysis/6440 "2019-05-24T14:03:20Z")

</div>

What is ESA ( Electrical Signature Analysis)? Electrical signature analysis (ESA), a powerful technology that can be used into most electro-mechanical equipment to greatly enhance condition diagnostics and prognostics ca…

---

## [What are diodes and how diodes are used in alternators and automotive applications](https://forumautomation.com/t/what-are-diodes-and-how-diodes-are-used-in-alternators-and-automotive-applications/6877)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [July 30, 2019, 4:24am UTC](https://forumautomation.com/t/what-are-diodes-and-how-diodes-are-used-in-alternators-and-automotive-applications/6877 "2019-07-30T04:24:08Z")

</div>

What are Diodes Diodes are devices which will allow the flow of electricity in one direction, it is simply a one-way valve and if the current tries to reverse the flow of direction the diode won’t allow it. The current …

---

## [AC Generator: Explain it's Working Principle, Types, Advantages, and Applications](https://forumautomation.com/t/ac-generator-explain-its-working-principle-types-advantages-and-applications/6682)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 1\
**Last updated:** [June 11, 2024, 3:40pm UTC](https://forumautomation.com/t/ac-generator-explain-its-working-principle-types-advantages-and-applications/6682 "2024-06-11T15:40:32Z")

</div>

Introduction to AC generator AC generator is a device which can convert electrical energy into mechanical energy by using the principle called electromagnetic induction. It is the process by which induced current will b…

---

## [Smart Grid - Benefits of using smart grid, Disadvantages](https://forumautomation.com/t/smart-grid-benefits-of-using-smart-grid-disadvantages/4422)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [July 20, 2020, 9:17am UTC](https://forumautomation.com/t/smart-grid-benefits-of-using-smart-grid-disadvantages/4422 "2020-07-20T09:17:00Z")

</div>

What is the Smart Grid? The Smart Grid is a technology to provide intelligence to electricity distribution networks to allow a better use and greater efficiency in the distribution of electric power. The intelligent …

---

## [Why do we need Fuse and How does it Work?](https://forumautomation.com/t/why-do-we-need-fuse-and-how-does-it-work/6547)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [June 13, 2019, 5:41pm UTC](https://forumautomation.com/t/why-do-we-need-fuse-and-how-does-it-work/6547 "2019-06-13T17:41:52Z")

</div>

WHAT IS A FUSE? A fuse is an overcurrent protecting device it is a small piece of metal which is connected between two terminals and it would be mounted on the insulator base it is connected in series with the circuit o…

---

## [How to select a VFD?](https://forumautomation.com/t/how-to-select-a-vfd/4375)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [August 13, 2018, 6:26pm UTC](https://forumautomation.com/t/how-to-select-a-vfd/4375 "2018-08-13T18:26:40Z")

</div>

VFD is Variable Frequency Drive used to control the voltage to the motor to regulate the speed of the motor. A VFD is chosen mostly based on the applications and also VFD can be selected based on the specifications. …

---

## [What are the types of Solenoid Valves?](https://forumautomation.com/t/what-are-the-types-of-solenoid-valves/9683)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 0\
**Last updated:** [August 3, 2021, 11:04am UTC](https://forumautomation.com/t/what-are-the-types-of-solenoid-valves/9683 "2021-08-03T11:04:52Z")

</div>

What is Solenoid Valve? A solenoid valve is an electromechanically operated valve that converts electrical energy to mechanical energy, thereby creating a magnetic reaction. A solenoid is a group of coiled wires that…

---

## [Causes of Electric motor failure](https://forumautomation.com/t/causes-of-electric-motor-failure/5954)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 18, 2019, 6:02pm UTC](https://forumautomation.com/t/causes-of-electric-motor-failure/5954 "2019-02-18T18:02:04Z")

</div>

Electric motors are commonly used field instrument for household uses and industrial purposes. In general, in large organizations, an engine maintenance program is carried out in which the causes of the engine failure…

---

## [7 Best electrical wiring app and their features](https://forumautomation.com/t/7-best-electrical-wiring-app-and-their-features/7977)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [March 3, 2020, 5:18pm UTC](https://forumautomation.com/t/7-best-electrical-wiring-app-and-their-features/7977 "2020-03-03T17:18:41Z")

</div>

What is electrical wiring Electrical wiring can be considered as the connection of cables and wires to related devices such as cables, fuses, sockets, fans to the main distribution board for continuous power supply. It …

---

## [How Isolation Amplifier can be used for electrical isolation?](https://forumautomation.com/t/how-isolation-amplifier-can-be-used-for-electrical-isolation/6492)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [June 5, 2019, 5:23pm UTC](https://forumautomation.com/t/how-isolation-amplifier-can-be-used-for-electrical-isolation/6492 "2019-06-05T17:23:51Z")

</div>

WHAT IS AN ISOLATION AMPLIFIER Isolation amplifier can isolate the input and the output electrically and thus it is called an isolation amplifier, in some cases certain equipment needs to be isolated from electrical con…

---

## [What is a Servo Motor? Basics, Advantages and Disadvantages](https://forumautomation.com/t/what-is-a-servo-motor-basics-advantages-and-disadvantages/3186)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 24, 2018, 6:04pm UTC](https://forumautomation.com/t/what-is-a-servo-motor-basics-advantages-and-disadvantages/3186 "2018-02-24T18:04:22Z")

</div>

What is a Servo motor? A servo is a small device which has an output shaft which positions on coded signal. It is a rotary or linear actuator that allows for precise control of angular or linear position, velocity and …

---

## [WHY DO WE NEED RESIDUAL CURRENT DEVICE IN AN ELECTRICAL EQUIPMENT?](https://forumautomation.com/t/why-do-we-need-residual-current-device-in-an-electrical-equipment/6491)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [June 4, 2019, 6:32pm UTC](https://forumautomation.com/t/why-do-we-need-residual-current-device-in-an-electrical-equipment/6491 "2019-06-04T18:32:22Z")

</div>

WHAT IS A RESIDUAL CURRENT DEVICE A residual current device is an electrical safety device which can be used to prevent electrical injuries, while using electrical equipment there is a chance to get electrical injuries …

---

## [Motor overload Protection - Thermal overload protection](https://forumautomation.com/t/motor-overload-protection-thermal-overload-protection/3315)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 1\
**Last updated:** [June 18, 2024, 3:48pm UTC](https://forumautomation.com/t/motor-overload-protection-thermal-overload-protection/3315 "2024-06-18T15:48:49Z")

</div>

What is Overload in Motors and reason for overload? Overload is a condition which the motor works in an excess current. which could cause excessive overheating in the motor. In such condition, the motor circuit must be p…

---

## [Types of Voltage Multiplier and its Operation](https://forumautomation.com/t/types-of-voltage-multiplier-and-its-operation/6136)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [March 23, 2019, 4:41pm UTC](https://forumautomation.com/t/types-of-voltage-multiplier-and-its-operation/6136 "2019-03-23T16:41:16Z")

</div>

VOLTAGE MULTIPLIER A voltage multiplier is used to convert AC electrical power from a lower voltage to a higher Dc voltage it is an electrical circuit which mainly constitutes of capacitors and dio…

---

## [Megger test / Sheath resistance test procedure for cables](https://forumautomation.com/t/megger-test-sheath-resistance-test-procedure-for-cables/2549)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 1, 2017, 9:34am UTC](https://forumautomation.com/t/megger-test-sheath-resistance-test-procedure-for-cables/2549 "2017-11-01T09:34:38Z")

</div>

A Megger test or sheath resistance test is used to diagnose cable faults, either short circuit problem, water penetration, moisture or current leakage. A Megohmmeter is used to measure the resistance of the crossed-link…

---

## [HOW CAN WE ASSURE ELECTRICAL SAFETY AT WORKPLACE](https://forumautomation.com/t/how-can-we-assure-electrical-safety-at-workplace/6539)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [June 12, 2019, 6:14pm UTC](https://forumautomation.com/t/how-can-we-assure-electrical-safety-at-workplace/6539 "2019-06-12T18:14:36Z")

</div>

ELECTRICAL GROUNDING We can assure electrical safety by grounding, electrical grounding is really useful because it provides “reference voltage level” it is called zero potential or ground potential and all the other vo…

---

## [Automatic Voltage Regulator (AVR) - Introduction, working](https://forumautomation.com/t/automatic-voltage-regulator-avr-introduction-working/5214)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [November 15, 2018, 5:42pm UTC](https://forumautomation.com/t/automatic-voltage-regulator-avr-introduction-working/5214 "2018-11-15T17:42:31Z")

</div>

What is AVR? Automatic Voltage Regulator (AVR) is an automatic control device that is used to keep the terminal generator voltage constant. The Generator terminal voltage is fed to the AVR which compares it with a refere…

---

## [What is the difference between 4 pole MCB and Triple pole and neutral?](https://forumautomation.com/t/what-is-the-difference-between-4-pole-mcb-and-triple-pole-and-neutral/10119)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 4\
**Last updated:** [August 3, 2026, 7:59am UTC](https://forumautomation.com/t/what-is-the-difference-between-4-pole-mcb-and-triple-pole-and-neutral/10119 "2026-08-03T07:59:04Z")

</div>

Explain how the 4 pole MCB is different from Triple pole and neutral? Reference Image Provided by the Respondent

---

## [DIFFERENCE BETWEEN SOLID STATE RELAY & ELECTRO-MECHANICAL RELAY](https://forumautomation.com/t/difference-between-solid-state-relay-electro-mechanical-relay/6511)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 2\
**Last updated:** [December 29, 2020, 5:10am UTC](https://forumautomation.com/t/difference-between-solid-state-relay-electro-mechanical-relay/6511 "2020-12-29T05:10:13Z")

</div>

WHAT IS SOLID STATE RELAY By using a solid state relay we can control load currents, by using solid state switches such as SCR’s or a power transistor. solid state relay can switch without the contact, a solid state rel…

---

## [Microgrid - basics, structure, advantages, disadvantages](https://forumautomation.com/t/microgrid-basics-structure-advantages-disadvantages/4390)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [August 15, 2018, 4:45pm UTC](https://forumautomation.com/t/microgrid-basics-structure-advantages-disadvantages/4390 "2018-08-15T16:45:52Z")

</div>

What is the Microgrid? The microgrid is a small-scale power supply network that is designed to provide power for a small community with a local power generation unit. The microgrid connects both power generation and the …

---

## [Injection test for Overcurrent relay using PTE 100-C](https://forumautomation.com/t/injection-test-for-overcurrent-relay-using-pte-100-c/5859)

<div class="topic-metadata">

**Author:** [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Replies:** 0\
**Last updated:** [February 5, 2019, 5:34pm UTC](https://forumautomation.com/t/injection-test-for-overcurrent-relay-using-pte-100-c/5859 "2019-02-05T17:34:23Z")

</div>

The PTE-100-C is portable Universal test equipment for testing electromechanical, electronic, and digital relays. PTE 100-C Plus is a portable electromechanical and digital protection test relay. This tool has an AC …

---

## [When using an Induction Motor? Why is a Star Delta starter preferred?](https://forumautomation.com/t/when-using-an-induction-motor-why-is-a-star-delta-starter-preferred/11484)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [September 20, 2023, 5:23pm UTC](https://forumautomation.com/t/when-using-an-induction-motor-why-is-a-star-delta-starter-preferred/11484 "2023-09-20T17:23:39Z")

</div>

When a motor is initially connected in the star delta starting, its phase voltage is 58% of the line voltage. Motor current is decreased as a result of the reduced voltage. As a result of the reduced current, the motor …

---

## [Ballast in lighting and what are the types of ballast](https://forumautomation.com/t/ballast-in-lighting-and-what-are-the-types-of-ballast/6937)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [August 8, 2019, 4:30am UTC](https://forumautomation.com/t/ballast-in-lighting-and-what-are-the-types-of-ballast/6937 "2019-08-08T04:30:59Z")

</div>

What is a Ballast Ballasts are used in all discharge lamps, it is used to limit the amount of current in the lamp and it provides a better starting voltage. There is low and high power factor ballast, the low power fact…

---

## [Types of Excitation system and how is it useful for power system](https://forumautomation.com/t/types-of-excitation-system-and-how-is-it-useful-for-power-system/6663)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 1\
**Last updated:** [June 14, 2024, 5:31pm UTC](https://forumautomation.com/t/types-of-excitation-system-and-how-is-it-useful-for-power-system/6663 "2024-06-14T17:31:48Z")

</div>

What is Excitation system It is used to create and strengthen the magnetic field of the generator and it is done by passing a DC through the field winding. for excitation purpose, AC and DC exciters are used but the DC …

---

## [Eddy Current loss VS Hysteresis loss](https://forumautomation.com/t/eddy-current-loss-vs-hysteresis-loss/10310)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 3\
**Last updated:** [May 22, 2025, 12:42pm UTC](https://forumautomation.com/t/eddy-current-loss-vs-hysteresis-loss/10310 "2025-05-22T12:42:27Z")

</div>

What is Eddy current loss? According to Faraday’s law of electromagnetic induction, an emf is induced in a material when an alternating magnetic field is applied to a material with the magnetic property. The EMF’s curr…

---

## [What are the motor information required to program a VFD?](https://forumautomation.com/t/what-are-the-motor-information-required-to-program-a-vfd/1278)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [August 27, 2016, 5:12pm UTC](https://forumautomation.com/t/what-are-the-motor-information-required-to-program-a-vfd/1278 "2016-08-27T17:12:27Z")

</div>

Motor Information required to program a VFD are 1.Voltage - 208/230 or 460V 3 phase .The motor has to be three phase but the input voltage can be single single phase. 2.Amperage - The amperage always needed especially …

---

## [What could cause the motor winding to burn?](https://forumautomation.com/t/what-could-cause-the-motor-winding-to-burn/9697)

<div class="topic-metadata">

**Author:** [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Replies:** 2\
**Last updated:** [September 18, 2024, 2:28pm UTC](https://forumautomation.com/t/what-could-cause-the-motor-winding-to-burn/9697 "2024-09-18T14:28:28Z")

</div>

Explain the reasons for the burning of the motor winding

---

## [How to wire a VFD to a motor? Three phase and single phase VFD wiring](https://forumautomation.com/t/how-to-wire-a-vfd-to-a-motor-three-phase-and-single-phase-vfd-wiring/8446)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [July 11, 2020, 3:15pm UTC](https://forumautomation.com/t/how-to-wire-a-vfd-to-a-motor-three-phase-and-single-phase-vfd-wiring/8446 "2020-07-11T15:15:28Z")

</div>

What is the use of VFD and where is it used A VFD is a device which can control the rotational speed of the AC motor, the rotation is controlled by adjusting or controlling the frequency and voltage supplied to an ele…

---

## [7 Best electrical calculator apps for android and their features](https://forumautomation.com/t/7-best-electrical-calculator-apps-for-android-and-their-features/7316)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [October 22, 2019, 4:10am UTC](https://forumautomation.com/t/7-best-electrical-calculator-apps-for-android-and-their-features/7316 "2019-10-22T04:10:21Z")

</div>

What is electrical calculators Electrical calculators are widely used to get a safe electrical design, electrical accidents can be prevented by the help of electrical calculators. In order to prevent electrical accident…

---

## [Major difference between A C Servo motor and D C servo motor](https://forumautomation.com/t/major-difference-between-a-c-servo-motor-and-d-c-servo-motor/835)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [March 7, 2016, 1:28am UTC](https://forumautomation.com/t/major-difference-between-a-c-servo-motor-and-d-c-servo-motor/835 "2016-03-07T01:28:17Z")

</div>

A C Servo Motor 1.Low power output of about 0.5 W to 100 W Efficiency is less about 5 to 20 % Due to absence of commentator maintenance is less Stability problems are less No radio frequency noise 6.Compa…

---

## [HOW DOES A PIEZOELECTRIC TRANSDUCER WORK?](https://forumautomation.com/t/how-does-a-piezoelectric-transducer-work/6438)

<div class="topic-metadata">

**Author:** [@Ashlin.aj](https://forumautomation.com/u/Ashlin.aj)\
**Replies:** 0\
**Last updated:** [May 23, 2019, 5:57pm UTC](https://forumautomation.com/t/how-does-a-piezoelectric-transducer-work/6438 "2019-05-23T17:57:49Z")

</div>

PIEZOELECTRIC TRANSDUCER This is an electroacoustic transducer which is used for the conversion of pressure or stress into an electrical force, a transducer will convert one form of energy into anoth…

---

## [What is MCB? How Does a Circuit Breaker Work?](https://forumautomation.com/t/what-is-mcb-how-does-a-circuit-breaker-work/10137)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 1\
**Last updated:** [September 20, 2024, 12:07pm UTC](https://forumautomation.com/t/what-is-mcb-how-does-a-circuit-breaker-work/10137 "2024-09-20T12:07:04Z")

</div>

What is MCB? MCB stands for Miniature Circuit Breaker. It is designed to switch off electrical circuits automatically if any fault occurs in circuits like overload, short circuits, etc. Traditionally, we used fuse to pr…

---

## [What is Reactive Power? How to compensate the reactive power?](https://forumautomation.com/t/what-is-reactive-power-how-to-compensate-the-reactive-power/6282)

<div class="topic-metadata">

**Author:** [@Ashlin.aj](https://forumautomation.com/u/Ashlin.aj)\
**Replies:** 1\
**Last updated:** [March 2, 2020, 9:04am UTC](https://forumautomation.com/t/what-is-reactive-power-how-to-compensate-the-reactive-power/6282 "2020-03-02T09:04:04Z")

</div>

What is reactive power In an AC circuit the reactive power can be described as the unused power by the reactive components it is a consequence of the AC system it is used to build up magnetic fields. Reactive power comp…

---

## [HOW POWER LINE CARRIER COMMUNICATION CAN BE USEFUL FOR INFORMATION TRANSFER](https://forumautomation.com/t/how-power-line-carrier-communication-can-be-useful-for-information-transfer/6487)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [June 3, 2019, 6:00pm UTC](https://forumautomation.com/t/how-power-line-carrier-communication-can-be-useful-for-information-transfer/6487 "2019-06-03T18:00:08Z")

</div>

WHAT IS POWER LINE CARRIER COMMUNICATION Power line carrier communication uses the power lines for information transfer. By using this low-frequency radio currents are propagated through the metallic transmission line c…

---

## [Interview Question : What are the Sources of Electricity](https://forumautomation.com/t/interview-question-what-are-the-sources-of-electricity/251)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [February 20, 2015, 6:08am UTC](https://forumautomation.com/t/interview-question-what-are-the-sources-of-electricity/251 "2015-02-20T06:08:28Z")

</div>

SOURCES OF ELECTRICITY Electricity can be created by several means: Friction, Heat, Light, Pressure, Chemical Action, or Magnetic Action. Only a few of these sources of energy are used in the automobile. The battery pro…

---

## [HOW CAN WE GET A REGULATED DC OR AC OUTPUT BY USING A SINGLE PHASE HALF-WAVE RECTIFIER?](https://forumautomation.com/t/how-can-we-get-a-regulated-dc-or-ac-output-by-using-a-single-phase-half-wave-rectifier/6459)

<div class="topic-metadata">

**Author:** [@ashlin](https://forumautomation.com/u/ashlin)\
**Replies:** 0\
**Last updated:** [May 28, 2019, 6:05pm UTC](https://forumautomation.com/t/how-can-we-get-a-regulated-dc-or-ac-output-by-using-a-single-phase-half-wave-rectifier/6459 "2019-05-28T18:05:45Z")

</div>

SINGLE PHASE HALF WAVE CONTROLLED RECTIFIER These rectifiers are widely used in many electronics based converters, only one SCR is used in half wave single phase rectifier and it is placed in between the AC…

---

## [What is IP Rating?](https://forumautomation.com/t/what-is-ip-rating/10069)

<div class="topic-metadata">

**Author:** [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Replies:** 1\
**Last updated:** [October 17, 2024, 4:53pm UTC](https://forumautomation.com/t/what-is-ip-rating/10069 "2024-10-17T16:53:10Z")

</div>

What is IP Rating? An IP Rating (Ingress Protection Rating) is the basic indicator that classifies different levels of sealing effectiveness provided by a control panel manufacturer for a particular cabinet against fore…

---

## [What is a Pyranometer? How it measures Solar Irradiance?](https://forumautomation.com/t/what-is-a-pyranometer-how-it-measures-solar-irradiance/13306)

<div class="topic-metadata">

**Author:** [@Rabert](https://forumautomation.com/u/Rabert)\
**Replies:** 0\
**Last updated:** [June 6, 2025, 2:40pm UTC](https://forumautomation.com/t/what-is-a-pyranometer-how-it-measures-solar-irradiance/13306 "2025-06-06T14:40:23Z")

</div>

Effective plant performance research requires an understanding of pyranometers, GHI, GTI, as well as benchmarking across solar plant blocks. Accurate irradiance measurement is the basis of performance analysis in utilit…

[Previous page](https://forumautomation.com/c/electrical/11.md?per_page=50)

[Next page](https://forumautomation.com/c/electrical/11.md?page=2&per_page=50)
