# DCS (Distributed Control Systems)

**URL:** https://forumautomation.com/c/dcs-distributed-control-systems/5.md?page=2

[Latest](https://forumautomation.com/latest.md) · [Categories](https://forumautomation.com/categories.md) · [Tags](https://forumautomation.com/tags.md)

**Page:** 3

---

## [Honeywell TPS Program Control Language(CL) for packing and unpacking digital signals](https://forumautomation.com/t/honeywell-tps-program-control-language-cl-for-packing-and-unpacking-digital-signals/325)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [March 20, 2015, 10:08am UTC](https://forumautomation.com/t/honeywell-tps-program-control-language-cl-for-packing-and-unpacking-digital-signals/325 "2015-03-20T10:08:18Z")

</div>

Some devices like the SLC500 can read single bit but cannot write. The customer is then forced to write a program that takes a numeric value and stores the single bits into this numeric. Then this numeric must be written…

---

## [Steps to configure Server to C200 Communications via Ethernet](https://forumautomation.com/t/steps-to-configure-server-to-c200-communications-via-ethernet/324)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [March 20, 2015, 9:58am UTC](https://forumautomation.com/t/steps-to-configure-server-to-c200-communications-via-ethernet/324 "2015-03-20T09:58:49Z")

</div>

Follow the following steps to configure Server to C200 Communications via Ethernet Edit "bootpdata.txt " file in Honeywell\\TPS50\\system\\bin to include C200 Ethernet Module’s MAC and IP addresses. Use RSLinx(MUST be RSL…

---

## [Project Process control problem](https://forumautomation.com/t/project-process-control-problem/317)

<div class="topic-metadata">

**Author:** [@GlennAvans](https://forumautomation.com/u/GlennAvans)\
**Replies:** 1\
**Last updated:** [March 20, 2015, 8:43am UTC](https://forumautomation.com/t/project-process-control-problem/317 "2015-03-20T08:43:23Z")

</div>

Dear readers I will introduce our project first. It’s a project that contains 2 water tanks, 1 pump, 2 valves, pressure tank, heater, pipes with manual valves and sensors. With the help of matLab SimuLink we try to make…

---

## [Understanding Wonderware Application-Plot Plans](https://forumautomation.com/t/understanding-wonderware-application-plot-plans/289)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [March 1, 2015, 7:49am UTC](https://forumautomation.com/t/understanding-wonderware-application-plot-plans/289 "2015-03-01T07:49:53Z")

</div>

All the plot plans except for the (Buildings and Analyzer Houses), shall be imported as a bitmap which is extracted from the AutoCAD. This is the easier method. Perform the following tasks to import the plot plan. Clic…

---

## [Understanding Wonderware Application-Preparing Tag Database in Microsoft Excel](https://forumautomation.com/t/understanding-wonderware-application-preparing-tag-database-in-microsoft-excel/288)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [March 1, 2015, 7:46am UTC](https://forumautomation.com/t/understanding-wonderware-application-preparing-tag-database-in-microsoft-excel/288 "2015-03-01T07:46:25Z")

</div>

The following steps can be used to determine the Excel format in updating the database. Start -Programs - FactorySuite - Intouch. Select the application that has to be opened. Right click on the application and select D…

---

## [Understanding Wonderware Application-Importing Windows and Scriptss](https://forumautomation.com/t/understanding-wonderware-application-importing-windows-and-scriptss/287)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [March 1, 2015, 7:43am UTC](https://forumautomation.com/t/understanding-wonderware-application-importing-windows-and-scriptss/287 "2015-03-01T07:43:07Z")

</div>

A most important functionality of the Wonderware is using the import/export facility. This is primarily used during the integration of the Wonderware with any other system at site. The steps to import any window or scr…

---

## [The search function in Configuration Studio does not work?](https://forumautomation.com/t/the-search-function-in-configuration-studio-does-not-work/283)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 1\
**Last updated:** [February 26, 2015, 9:41am UTC](https://forumautomation.com/t/the-search-function-in-configuration-studio-does-not-work/283 "2015-02-26T09:41:36Z")

</div>

The search function in Configuration Studio does not work ?

---

## [DSA(Distributed System Architecture) is not working after Experion release migration from R410.1 to R410.2?](https://forumautomation.com/t/dsa-distributed-system-architecture-is-not-working-after-experion-release-migration-from-r410-1-to-r410-2/282)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 1\
**Last updated:** [February 26, 2015, 9:38am UTC](https://forumautomation.com/t/dsa-distributed-system-architecture-is-not-working-after-experion-release-migration-from-r410-1-to-r410-2/282 "2015-02-26T09:38:51Z")

</div>

Updation from R410.1 to R410.2 and now DSA no longer works. Both servers are on the same release R410.2 but ServerB will not communicate at all with other DSA servers. ServerA is working correctly. When a ping is done to…

---

## [Solution for PCDI(Peer Control Data Interface) and SCADA(Supervisory control and Data Acquisition address assignment?](https://forumautomation.com/t/solution-for-pcdi-peer-control-data-interface-and-scada-supervisory-control-and-data-acquisition-address-assignment/274)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [February 26, 2015, 8:31am UTC](https://forumautomation.com/t/solution-for-pcdi-peer-control-data-interface-and-scada-supervisory-control-and-data-acquisition-address-assignment/274 "2015-02-26T08:31:42Z")

</div>

If we gave both PCDI & SCADA address to any one tag and loaded to controller. After loading if u delete that address in particular tag and assign same address to same tag or different tags it wont allow.Pls suggest a sol…

---

## [PCI to PCI-Express conversion kit?](https://forumautomation.com/t/pci-to-pci-express-conversion-kit/270)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 1\
**Last updated:** [February 25, 2015, 11:46pm UTC](https://forumautomation.com/t/pci-to-pci-express-conversion-kit/270 "2015-02-25T23:46:21Z")

</div>

I have a DCS server.I need to add a controlenet card to this server.Controlnet card is PCI bus.But server doesnt have a PCI slot. I know almost all of the servers which is available in market doesnt have a PCI slot nowad…

---

## [Does anybody know about bulkcable for Series C IOTA TAID11 for Honeywell C300 controller?](https://forumautomation.com/t/does-anybody-know-about-bulkcable-for-series-c-iota-taid11-for-honeywell-c300-controller/269)

<div class="topic-metadata">

**Author:** [@automate](https://forumautomation.com/u/automate)\
**Replies:** 0\
**Last updated:** [February 25, 2015, 12:26am UTC](https://forumautomation.com/t/does-anybody-know-about-bulkcable-for-series-c-iota-taid11-for-honeywell-c300-controller/269 "2015-02-25T00:26:42Z")

</div>

hey guys i need information about bulk cable for Honeywell Seriec C IOTA TAID11. I know one thing bulk cables are supplied by NAI-America. But i am not sure they have a standard bulk cable for TAID11. Bulk cable is also…

---

## [Radikor Elco Interconnection board details](https://forumautomation.com/t/radikor-elco-interconnection-board-details/243)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 0\
**Last updated:** [February 11, 2015, 4:51am UTC](https://forumautomation.com/t/radikor-elco-interconnection-board-details/243 "2015-02-11T04:51:34Z")

</div>

---

## [When loading a Honeywell LM(Logic Manager), get UCN COMM ERROR (TDC 3000)](https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [February 11, 2015, 4:27am UTC](https://forumautomation.com/t/when-loading-a-honeywell-lm-logic-manager-get-ucn-comm-error-tdc-3000/242 "2015-02-11T04:27:32Z")

</div>

Doing the Prog. Load operation getting the PI from the HM and the DATA BASE from removable media, the error occurs prior to asking for the DATA BASE. The exact cause is unknown

---

## [Reading Documentation Tool Files in Microsoft Office Excel - Honeywell TDC 3000](https://forumautomation.com/t/reading-documentation-tool-files-in-microsoft-office-excel-honeywell-tdc-3000/230)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [January 5, 2015, 6:39pm UTC](https://forumautomation.com/t/reading-documentation-tool-files-in-microsoft-office-excel-honeywell-tdc-3000/230 "2015-01-05T18:39:24Z")

</div>

The below instructions will replace space followed by white space with a tab character -Use Documentation Tool and output the results of the query to a file on the HM -Transfer file from the HM to PC. File Transfer can b…

---

## [Cannot delete a box or point from an HG (Highway Gateway) of Honeywell TPS DCS-TDC](https://forumautomation.com/t/cannot-delete-a-box-or-point-from-an-hg-highway-gateway-of-honeywell-tps-dcs-tdc/228)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [January 5, 2015, 6:25pm UTC](https://forumautomation.com/t/cannot-delete-a-box-or-point-from-an-hg-highway-gateway-of-honeywell-tps-dcs-tdc/228 "2015-01-05T18:25:07Z")

</div>

To delete a box from the hiway, set the BOX/SLOT configuration to NOTCONFIG and load (CTL 12). If this does not work, then verify that there are no points in the box, using the Organizational Summary Menu Hiway Box Point…

---

## [Config Mismatch error when loading an HG(Highway Gateway) point](https://forumautomation.com/t/config-mismatch-error-when-loading-an-hg-highway-gateway-point/229)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [January 5, 2015, 6:28pm UTC](https://forumautomation.com/t/config-mismatch-error-when-loading-an-hg-highway-gateway-point/229 "2015-01-05T18:28:11Z")

</div>

This error usually indicates that the point being loaded does not match the configuration that is required for it. As an example, loading a DO point as a LATCHED point type, but the box/slot configuration for the slot i…

---

## [HMI Web Display Builder Script for color change in HMI (Human Machine Interface) for Push Button](https://forumautomation.com/t/hmi-web-display-builder-script-for-color-change-in-hmi-human-machine-interface-for-push-button/217)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 31, 2014, 5:54pm UTC](https://forumautomation.com/t/hmi-web-display-builder-script-for-color-change-in-hmi-human-machine-interface-for-push-button/217 "2014-12-31T17:54:38Z")

</div>

IF ME.DataValue(“TAG1.MODE”) = 0 AND ME.DataValue(“TAG1.MODATTR”) = 0 THEN ME.innerText = “MANL” ME.fillColor = VBGREEN ME.lineColor = VBGREEN ELSEIF ME.DataValue(“TAG1.MODE”) = 0 AND ME.DataValue(“TAG1.MODATTR”) = 1 …

---

## [HMI Web Display Builder Script for Auto or Manual mode selection in HMI (Human Machine Interface) for Push Button](https://forumautomation.com/t/hmi-web-display-builder-script-for-auto-or-manual-mode-selection-in-hmi-human-machine-interface-for-push-button/216)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 31, 2014, 5:49pm UTC](https://forumautomation.com/t/hmi-web-display-builder-script-for-auto-or-manual-mode-selection-in-hmi-human-machine-interface-for-push-button/216 "2014-12-31T17:49:51Z")

</div>

onclick : IF ME.DataValue(“TAG1.MODE”) = 1 THEN R = MSGBOX("ENTER TO SELECT MAN ",VBOKCANCEL) IF R = VBOK THEN ME.DataValue(“TAG1.MODE”) = 0 END IF ELSEIF ME.DataValue("TAG1.MODE") = 0 THEN R = MSGBOX("ENTER TO SE…

---

## [Network Storm/ Network Traffic in honeywell DCS](https://forumautomation.com/t/network-storm-network-traffic-in-honeywell-dcs/214)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 30, 2014, 5:28pm UTC](https://forumautomation.com/t/network-storm-network-traffic-in-honeywell-dcs/214 "2014-12-30T17:28:12Z")

</div>

By definition, a “network storm” (or “data storm”) is excessive transmission of network traffic. Network storms can be experienced on FTE (Fault Tolerant Ethernet) through a variety of reasons including, but not limited …

---

## [Different between TPS and EPKS for Contcutout parameter](https://forumautomation.com/t/different-between-tps-and-epks-for-contcutout-parameter/213)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 30, 2014, 5:25pm UTC](https://forumautomation.com/t/different-between-tps-and-epks-for-contcutout-parameter/213 "2014-12-30T17:25:05Z")

</div>

In TPS:- When the contact cutout state is applied, alarms at the point are cut out. New alarms are not reported on the TPS alarm summary display at the HMI (for example, Universal Station, GUS) nor are they journaled on …

---

## [How to increase the number of Display Builder graphics available in the Display summary in Experion](https://forumautomation.com/t/how-to-increase-the-number-of-display-builder-graphics-available-in-the-display-summary-in-experion/212)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [December 30, 2014, 5:20pm UTC](https://forumautomation.com/t/how-to-increase-the-number-of-display-builder-graphics-available-in-the-display-summary-in-experion/212 "2014-12-30T17:20:29Z")

</div>

Perform a Backup of both Servers. • Perform a synch (assume ServerA is primary, ServerB is backup) • Break synch, drop ServerB down to “Database Only” • Run “sysbld –preserve –full” on ServerB • When prompted, type Y and…

---

## [Basics of Distributed Control System (DCS)](https://forumautomation.com/t/basics-of-distributed-control-system-dcs/203)

<div class="topic-metadata">

**Author:** [@denizen](https://forumautomation.com/u/denizen)\
**Replies:** 0\
**Last updated:** [December 27, 2014, 1:52am UTC](https://forumautomation.com/t/basics-of-distributed-control-system-dcs/203 "2014-12-27T01:52:17Z")

</div>

DISTRIBUTED CONTROL SYSTEM A system of dividing plant or process control into several areas of responsibility, each managed by its own controller, with the whole system connected to form a single entity, usually by means…

---

## [Converting Safety Manager IO points to Experion](https://forumautomation.com/t/converting-safety-manager-io-points-to-experion/190)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 5:44pm UTC](https://forumautomation.com/t/converting-safety-manager-io-points-to-experion/190 "2014-12-06T17:44:34Z")

</div>

How will Convert Safety Manager IO points to Experion DCS?

---

## [Internal Power fuse blown on conformally coated boards](https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 5:23pm UTC](https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189 "2014-12-06T17:23:56Z")

</div>

FSC I/O modules with fault message “Internal power-down”. What will be the reason

---

## [The digital input signals connected to the digital input module have normally open contacts. Does this module detect Earth faults on these inputs signals](https://forumautomation.com/t/the-digital-input-signals-connected-to-the-digital-input-module-have-normally-open-contacts-does-this-module-detect-earth-faults-on-these-inputs-signals/185)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 5:16pm UTC](https://forumautomation.com/t/the-digital-input-signals-connected-to-the-digital-input-module-have-normally-open-contacts-does-this-module-detect-earth-faults-on-these-inputs-signals/185 "2014-12-06T17:16:07Z")

</div>

The Safety system has a Earth Leakage Detector module (10310/./1) installed. The digital input signals connected to the digital input module have normally open contacts. Does this module detect Earth faults on these inpu…

---

## [During programming of FSC showing "FSC system memory overflow" error](https://forumautomation.com/t/during-programming-of-fsc-showing-fsc-system-memory-overflow-error/184)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 5:08pm UTC](https://forumautomation.com/t/during-programming-of-fsc-showing-fsc-system-memory-overflow-error/184 "2014-12-06T17:08:01Z")

</div>

A customer was trying to copy an FLD in FSC Navigator 602.2 the following message occurs on the FLD Page… “FSC system memory overflow” which means what?

---

## [History Module(HM) backup command for Honeywell TDC /TPS DCS](https://forumautomation.com/t/history-module-hm-backup-command-for-honeywell-tdc-tps-dcs/182)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 4:50pm UTC](https://forumautomation.com/t/history-module-hm-backup-command-for-honeywell-tdc-tps-dcs/182 "2014-12-06T16:50:51Z")

</div>

What is the command for taking HM backup in Honeywell TDC3000 or TPS DCS.

---

## [R301 release HTML graphics in R201 release of Honeywell Experion DCS](https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181)

<div class="topic-metadata">

**Author:** [@omega](https://forumautomation.com/u/omega)\
**Replies:** 1\
**Last updated:** [December 6, 2014, 4:46pm UTC](https://forumautomation.com/t/r301-release-html-graphics-in-r201-release-of-honeywell-experion-dcs/181 "2014-12-06T16:46:08Z")

</div>

How can i open R301 release HTML graphics in R201 release of Honeywell Experion DCS?

---

## [What is Experion Server-TPS (ESVT)](https://forumautomation.com/t/what-is-experion-server-tps-esvt/153)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [November 17, 2014, 10:40am UTC](https://forumautomation.com/t/what-is-experion-server-tps-esvt/153 "2014-11-17T10:40:10Z")

</div>

Experion Server-TPS (ESVT) An Experion-TPS Server (ESVT) node supports the same real-time database and subsystems as the Experion Server. The ESVT has a locally-installed LCNP board for accessing the TPN/LCN. The ESVT pr…

---

## [What is Experion Station-TPS (ES-T)](https://forumautomation.com/t/what-is-experion-station-tps-es-t/152)

<div class="topic-metadata">

**Author:** [@instrumen](https://forumautomation.com/u/instrumen)\
**Replies:** 0\
**Last updated:** [November 17, 2014, 10:39am UTC](https://forumautomation.com/t/what-is-experion-station-tps-es-t/152 "2014-11-17T10:39:15Z")

</div>

Experion Station-TPS (ES-T) The Experion Station-TPS (ES-T) node provides the same operations environment as other types of Experion Stations. Experion Stations have the ability to use html for custom graphics and presen…

[Previous page](https://forumautomation.com/c/dcs-distributed-control-systems/5.md?page=1)

[Next page](https://forumautomation.com/c/dcs-distributed-control-systems/5.md?page=3)
